OCO-M36CES

OCO-M36CES Through hole OCXO Sine wave Features    Applications: CDMA, networking, instrumentation High frequency stability vs. temperature (up to ±7.5 x 10-9) Wide operating temperature range: -40 up to +85 °C Parameter Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Short term stability Output waveform Output load Supply voltage Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range Vcontrol (Vc) via external potentiometer (20 kΩ) Reference voltage output (Vref) Phase noise @ 20 MHz carrier frequency Specification OCO-M36CES5 OCO-M36CES12 10.0000 ~ 40.0000 MHz 10.00, 12.80, 13.00, 15.36, 16.00, 16.384, 20.00, 26.00, 30.72, 32.00, 32.768 & 38.40 MHz  ±2.0 x 10-8 over -40 ~ +85 °C  ±1.0 x 10-8 over -20 ~ +70 °C  ±7.5 x 10-9 over -10 ~ +60 °C -9  ±5 x 10 ±5 % -9 ±5 %  ±5 x 10  ±3 x 10-8 1st year -11 < 2 x 10 Allan deviation per 1 s sine wave > 300 mV (rms) 50 Ω ±5 % +5.0 V 5 % +12 V 5 % < 200 mA < 80 mA -7 < 3 min < 1 x 10 @ +25 °C > ±5 x 10-7 positive slope 0 ~ +4.5 V 0 ~ +5.0 V +4.5 V +5.0 V < -105 dBc/Hz @ 10 Hz < -135 dBc/Hz @ 100 Hz < -145 dBc/Hz @ 1 kHz < -150 dBc/Hz @ 10 kHz Harmonics Operating temperature range Storage temperature range -10 ~ +60 °C, < -30 dBc -20 ~ +70 °C, -40 ~ +70 °C -55 ~ +85 °C or -40 ~ +85 °C Case height (H) Environmental test vibration shock 16.0 mm acceleration: 5 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis 100 g, half-sine, 3 ms (3 shocks each, 6 directions) Pin function #1 #2 #3 #4 #5 Vc Vref Vdc RF output GND Circuit diagram CBP = 0.01 mF Zout = 10 k // 15 pF 2002/95/EC RoHS compliant QuartzCom AG sales@quartzcom.com www.quartzcom.com QuartzCom Asia sales-asia@quartzcom.com QuartzCom USA sales-usa@quartzcom.com 12 May. 10