OCO-M3AGS

OCO-M36AGS Low G-sensitivity OCXO Sine wave Features Low G-sensitivity stability 1.0 x 10-9 /g High frequency stability vs. temperature (up to ±7.5 x 10-9) Low phase noise optional Parameter Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Short term stability G-sensitivity (in the range 0 ~ 500 Hz) Output waveform Output load Supply voltage Steady-state current consumption @ +25 °C Peak current consumption during warm-up time Warm-up time Frequency pulling range Voltage control (Vc) Reference voltage output (Vref) Phase noise @ 10 MHz carrier frequency Low phase noise for Vdc = 12 V Specification OCO-M36AGS5 OCO-M36AGS12 5.0000 ~ 20.0000 MHz 5.00, 10.00, 12.80, 13.00, 16.384 & 20.00 MHz ≤ ±2.0 x 10-9 over -40 ~ +85 °C ≤ ±1.0 x 10-9 over -20 ~ +70 °C ≤ ±7.5 x 10-10 over -10 ~ +60 °C -10 ≤ ±5 x 10 ±5 % -10 ±5 % ≤ ±5 x 10 ≤ ±3 x 10-8 1st year -12 < 5 x 10 Allan deviation per 1 s -9 < 1.5 x 10 /g optional < 1.0 x 10-9 /g sine wave > 300 mV (rms) 50 Ω ±5 % +5.0 V ±5 % +12 V ±5 % < 400 mA < 150 mA < 950 mA < 400 mA < 3 min < ±1 x 10-7 @ +25 °C > ±4 x 10-7 positive slope 0 ~ +4.5 V 0 ~ +5.0 V +4.5 V +5.0 V < -130 dBc/Hz @ 10 Hz < -153 dBc/Hz @ 100 Hz < -158 dBc/Hz @ 1 kHz < -160 dBc/Hz @ 10 kHz Harmonics Operating temperature range Storage temperature range -10 ~ +60 °C, > 30 dBc -20 ~ +70 °C, -40 ~ +70 °C -55 ~ +85 °C or -40 ~ +85 °C Case height (H) Environmental test vibration shock 12.7 mm or 16.0 mm acceleration: 5 g; 10 Hz up to 200 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis 75 g, half-sine, 3 ms (3 shocks each, 6 directions) Pin function #1 #2 #3 #4 #5 Vc Vref Vdc RF output GND Circuit diagram CBP = 0.01 mF ZOUT = 50 Ω 2002/95/EC RoHS compliant QuartzCom AG sales@quartzcom.com www.quartzcom.com QuartzCom Asia sales-asia@quartzcom.com QuartzCom USA sales-usa@quartzcom.com 12 Dec. 10