OCO-SM14H

OCO-SM14H Through hole OCXO HCMOS Features Applications: GPS, base-station, synchronisation, satelite-modem Small case size (DIL14 / 4 pin) Wide operating temperature range from -40 up to +85 °C Short warm up time of < 30 s Parameter Frequency range Standard frequencies Frequency stability vs. operating temperature range (tighter stability on request) vs. supply voltage change vs. load change vs. aging after 30 days of operation vs. long term aging Short term stability Output waveform Output load Rise / Fall time Supply voltage (1) Steady-state current consumption @ +25 °C Warm-up time @ 25 °C Frequency pulling range Vcontrol (Vc) via external voltage Vcontrol (Vc) via external potentiometer Phase noise @ 10 MHz carrier frequency Specification 10.0000 ~ 60.0000 MHz 10.00, 12.80, 16.000, 16.384, 19.44, 20.00 & 40.00 MHz ≤ ±0.20 ppm 0.3 ppm (peak to peak) over -40 ~ +85 °C ≤ ±0.15 ppm 0.2 ppm (peak to peak) over -20 ~ +70 °C ≤ ±0.075 ppm 0.1 ppm (peak to peak) over -10 ~ +60 °C ≤ ±0.10 ppm ±0.2 V ≤ ±0.01 ppm ±10 % ≤ ±0.30 ppm 1st year ≤ ±2.50 ppm 10 years < 5 x 10-10 Allan deviation over 0.1 ~ 30 s HCMOS VOH > 0.9 Vdc VOL < 0.1 Vdc 10 LS-TTL ±5 % < 5 ns +5.0 V ±0.2 V < 80 mA < 30 s within spec > ±3 ppm positive slope 0.5 ~ +5.0 V 10 kΩ -100 dBc/Hz @ 10 Hz -130 dBc/Hz @ 100 Hz -140 dBc/Hz @ 1 kHz -145 dBc/Hz @ 10 kHz -10 ~ +60 °C, -20 ~ +70 °C or -40 ~ +85 °C -65 ~ +125 °C Operating temperature range Storage temperature range (1) Supply voltage 3.3 V and 12 V on request Environmental test vibration shock acceleration: 10 g; 10 Hz up to 2’000 Hz and down to 10 Hz; all 3 axes, 4,5 h/axis 2’000 g, half-sine, 3 ms, (3 shocks each, 6 directions) Pin function: #1 #7 #8 # 14 Vc GND RF Output Vdc Example for solder pattern Do not design any conductive path between the patter Example for IR reflow soldering temperature 2002/95/EC RoHS compliant QuartzCom AG sales@quartzcom.com www.quartzcom.com QuartzCom Asia sales-asia@quartzcom.com QuartzCom USA sales-usa@quartzcom.com 13 May. 10