RQR

Voltage Controlled Oscillator - VCO RQR-Series Features ! ! ! ! Frequency up to 4 GHz Low Profile available: 3.6 mm Low Phase Noise Custom options available Applications ! ! ! ! Telecommunications High Performance Radio Base Stations Instrumentation Description The RQR-type is a VCO designed to meet the requirements for a variety of applications. Stationary or battery-operated, the unit is available in many different versions from LowNoise, HighPower, LinearTuning, LowProfile or WideBand. Components are selected for high-Q and tight tolerances. Raltron’s RQR-series is developed and manufactured in its ISO9000 certified facility in Miami. RF-simulation (CAE), automated test-equipment (Agilent VCO/PLL-Analyzer) and statistical process control (SPC) are integral part of R&D and manufacturing – which ensures minimal process variances and a high degree of repeatability. Mechanical Specification TOP SIDE BOTTOM SOLDER PATTERN Pad / Functions: [ 2 ] Tuning Voltage [ 6 ] Optional [10] RF-Output [14] Supply Voltage other pads: Ground Height “H” (max): Standard: 5.50/.216 LowProfile: 3.60/.140 Outline Tolerances: ±0.20mm / .008” Electrical Specification PARAMETER Max Frequency Tuning Ratio Tuning Voltage Supply Voltage Supply Current Output Power Harmonic Suppression Pushing Pulling COMMENTS, EXAMPLES Currently available in RQR-package Ratio of upper-to-lower freq (2 = “Octave-VCO”) Battery operated 2V, Stationary: 5V or higher Battery operated 3.3V to 5V, Stationary up to 12V Dependent on Frequency and Output Power Output Power Tolerance is typ. ±3dB (min. ±1dB) Dependent on Tuning Range and Freq Dependent on Freq, Tuning R., typ 0.1%~0.5% fo Dependent on Freq, Output Power and Circuit. SYMBOL fo f-up : f-low Vt Vcc Icc Pout a(2fo) df/dVcc df/dZL MIN TYP 1.1 0~5 5 20 +3 -15 5 5 MAX 4000 2.0 0~25 12 30 +10 UNIT MHz V V mA dBm dBc MHz/V MHz 0~2 3.3 10 -3 General Specification 1. Load Impedance is 50 Ohms. 2. Operating temperature range is typically –40°C…+85°C. 3. The package is non-hermetic. Substrate is glass-reinforced laminate, the cover is folded nickel-silver. 5. Customized specifications may deviate from this General Specification. 6. Phase-noise performance depends on the individual specification. Phase Noise is strongly dependent on (a) frequency (b) supply voltage and (c) tuning range. 7. The phase noise graph (to right) shows the characteristic of 4 typical RQR-VCOs. All samples are measured at 5V supply and have 3dBm output power. Variables are frequency and tuning range. Example: [4] = VCO from 720MHz to 1680MHz. [1] = LowNoise-VCO 800 MHz ±1% [3] = Standard-VCO 3000 MHz ±5% [2] = Standard-VCO 700 MHz ±4% [4] = WideBand-VCO 1200 MHz ± 40% L(f) [dBc/Hz] -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 1 Phase Noise SSB Phase Noise (see Note 7) 1234 4. Bypass-capacitors (ceramic) from Vcc to Ground are recommended: 1nF||100pF. 10 100 1,000 Freq. Offset [kHz] 10,000 © Raltron Electronics Corp. RQR-GeneralSpec-020228.doc J. Muenzing 10651 N.W. 19th St. ! Miami, Fl. 33172 ! USA ! Tel +001 305-593-6033 ! Fax +001 305-594-3973 ! vco@raltron.com ! www.raltron.com