RQRA-0800-1600

RQRA VCO SERIES Page 1 of 4 RQRA-0800-1600 ELECTRICAL SPECIFICATIONS PARAMETER CONDITION SYMBOL VALUE Min. Lower Frequency 1.2 Tuning Voltage:0.5V fo(Vt) Upper Frequency 1.2 Tuning Voltage:19.0V fo(Vt) 1600 Tuning Voltage Vt 0.5 Supply Voltage Vcc 11.0 Supply Current Vcc=11.5V Tuning Sensitivity Over Tuning Range, 0.5-19.0V df/dVt Pushing Over Supply Variation df/dVcc Vcc=11.5V a(n*fo) Pulling 1.3 2nd Harmonic Typ. Max. 800 CIN Operating Temperature Range Ta Storage Temperature Range Tstor 19.0 VDC 11.5 12.0 VDC 15 30 mA 60 MHz/V Moisture Sensitivity Level MSL HBM Human body model JESD22A114 Termination Finish 2.0 MHz/V 10.0 MHz pk-pk -10 dBc 47 pF -40 +85 °C -45 +90 °C 12.5 V Vcc(abs) JEDEC JSTD-2 MHz MHz df/dZl Input Capacitance Maximum Voltage UNIT 1 Glass-reinforced laminate base and nickel-silver cover ESD Sensitivity kV 3 OUTPUT CHARACTERISTICS SINE-WAVE VALUE PARAMETER SYMBOL CONDITION Sine Output Voltage Level Pw Output termination 50 Supply Current Is Vcc, ±5% Output Load OCL Min Typ. Max UNIT +3.0 +7.5 +12.0 dBm 15 30 mA 50 RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com Ω RQRA VCO SERIES Page 2 of 4 RQRA-0800-1600 MECHANICAL DIMENSIONS AND PIN FUNCTIONING H=0.15/3.81 ◼ Marking: RQRA 0800-1600 ◼ Date code Top View. RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com RQRA VCO SERIES Page 3 of 4 RQRA-0800-1600 PHASE NOISE VALUE PARAMETER SYMBOL SSB Phase noise (f) CONDITION Min Typ f=10kHz -95 f=100 kHz -115 Max UNIT dBc COMMON SPECIFICATIONS 1.1 -Load impedance is 50 Ohms. 1.2- The frequency range is defined between the (max) lower frequency and (min) upper frequency. 1.3 -Pulling is measured with 12dB return loss, all phases. 1.4- Package outline tolerances are typ. ±0.30mm / ±0.012inch if not stated differently on the drawing. 1.5 -It is recommended to provide two bypass-capacitors (ceramic), from Vcc to Gnd, 1nF || 100pF. 1.6- Solder temperature (peak) is 260°C for 10-20s. RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com RQRA VCO SERIES Page 4 of 4 RQRA-0800-1600 REFLOW PROFILE tP TP Critical Zone TL to TP Ramp-up TL tL TSMAX Temp. [°C] TSMIN Ramp-down tS Preheat t[25°C] to Peak Temperature Min Preheat Temperature Max Preheat Time (TSMIN to TSMAX) Temperature Peak Temperature Ramp-up rate Ramp-down rate Time within 5°C of Peak Temperature Time t[25°C] to Peak Temperature Time Time [sec] Recommended Solder Reflow Profile TSMIN TSMAX tS TL TP RUP RDOWN tP t[25°C] to Peak tL 150°C 175°C 60-180 sec. 217°C 260°C 3°C/sec max. 6°C/sec max. 10-20 sec max. 480 sec. 60-150 sec. APPROVALS Eng. approval, date: CP 06/16/2021 Created by, date: AR 06/16/2021 Revision: A RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com