TU4ALZ

DIGITAL TCXO SMT STRATUM 3 DIGITAL TCXO 101 SERIES FEATURES: − Fully meeting free run frequency accuracy and 24 hours maximum frequency drift requirements for STRATUM 3 according to Telecordia GR-1244-CORE (Issue 2)* − Very low power consumption suitable for portable and/or battery operated equipment ELECTRICAL SPECIFICATION** PARAMETER Supply voltage, nom. Supply current, max. Frequency, nom. Overall frequency stability over 10 years of operation including Initial Frequency Calibration Frequency drift during 24 hours of continuous operation, max (See note 1) Temperature Stability (See note 2) Control voltage range (see note 3) Frequency Adjustment Range (see note 3) Voltage control (pin 1) input impedance, min. (see note 3) Jitter (peak to peak), max (Fnom = 20 MHz) Phase noise SSB @ freq.offset, max (Fnom = 20 MHz) Vc ∆f/fo (Vc) Zin J(f) £ (∆f) SYMBOL Vs Is fo ∆fc/fo ∆fc/fo CONDITIONS Vs±5% Vs, nom. / Ta=25°C Ta=-40°C to + 85°C Ta=-40°C to + 85°C or Ta 0°C to + 70°C Ta=-40°C to + 85°C or Ta=0°C to + 70°C Vc= 0.25V Vc= Vs-0.25V Offset ∆f = 12kHz to 20MHz ∆f=10Hz ∆f=100Hz ∆f=1kHz ∆f ≥ 10kHz Load = 15pF Load=10 kΩ||20pF -45°C….+85°C IEC 68-2-6, test Fc: 10..500 Hz, 10g, 2 h, 3 directions IEC 68-2-27, test Ea: 100g, ½ sine, 3 bumps, 6 directions VALUE 3.0 5.0 2.0 to 15.0 10.000 to 40.000 ±4.6 ±0.37 ±0.30 ±0.28 +0.25…+2.25 -5 …-10 +5 …+10 100 10 -80 -110 -130 -145 0.9Vcc / 0.1Vcc 0.7 UNIT V mA MHz ppm ppm ppm ppm V PPM PPM kΩ ps dBc/Hz dBc/Hz dBc/Hz dBc/Hz V Vp-p HCMOS output levels Clipped Sine ENVIRONMENTAL SPECIFICATION Storage temperature range Vibration Mechanical shocks VOH/VOL Vout - All parameters within initial limits All parameters within initial limits Notes: 1. The 24 hours drift can be measured any time after minimum 1 hour from initial turn on. Please contact factory for details. 2. The Temperature Stability is calculated with regard to frequency reading at 25°C±1°C. 3. Parameter relevant only to products with TY prefix. * Telecordia is a trademark of Telecordia Technologies ** This specification is typical. Other frequencies, output types and custom parameters are available. Please, contact factory for details. RALTRON ELECTRONICS CORP. 10651 N.W . 19 St Miami, Florida 33172 U.S.A. phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http:/www.raltron.com th DIGITAL TCXO REFLOW PROFILE HOW TO ORDER (PART NUMBER) Prefix TU; No Freq. Adjust option TY; With Freq Adjust Output Type 0: CLIPPED SINE 2:HCMOS 4:LVCMOS Series 101 Revision A Temperature Range First letter Lowest Temperature, Second letter Highest Temperature: LZ: +0°C to +70°C D3: -40°C to +85°C Stability Value x 10E-6 Example 0.28= 0.28PPM 0.5= 0.5PPM Frequency In MHZ Example: T U 0101A - L Z - 0.28 - 19.440 – S T R 3 S tratum 3 F requency 19.44MHz Tem p Stability = 0.28 x 10E-6 = ±0.28 PPM O perating Tem p Range = 0°C to +70°C R evision "A" S eries O ut p ut CLIPPED SINE P refix: Digital TCXO – No Freq. Adjust RALTRON ELECTRONICS CORP. 10651 N.W . 19 St Miami, Florida 33172 U.S.A. phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http:/www.raltron.com th DIGITAL TCXO MECHANICAL SPECIFICATION C L 3 4 .098 (2.5) .098 (2.5) OUTLINE TOLERANCE: ±0.015” / 0.4mm .700±.004 (17.8±0.1) 2 1 5 .370±.008 9.4±0.2 C L 1.00±.008 (25.4±0.2) .929 (23.6) PIN FUNCTIONS: [ 1 ] CONTROL VOLTAGE or N/C [ 2 ] N/C [ 3 ] SUPPLY VOLTAGE [ 4 ] RF OUTPUT [ 5 ] CASE/GROUND . .866±.008 (22.0±0.2) MARKING AREA .157 4.0 RALTRON ELECTRONICS CORP. 10651 N.W . 19 St Miami, Florida 33172 U.S.A. phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http:/www.raltron.com th (17.8) .700 .118 3.0