A01-5NS-B

ACTIVE (DIGITAL) DELAY LINES SINGLE, DUAL, TRIPLE, QUAD DELAYS RESISTORS CAPACITORS COILS DELAY LINES A0 SERIES Economical cost, prompt delivery! Wide range of values, 5nS to 500nS TTL Schottky interfaced RoHS Term.W is RoHS compliant R CD A03SAG 1 50NS 1 R CD A04AG 100NS Low cost solution for multiple timing delays in a single package! RCD’s digital delay lines have been designed to provide precise fixed delays with all the necessary drive and pick-off circuitry. All inputs and outputs are Schottky-type and require no additional components to achieve specified delays. Designed to meet the applicable environmental requirements of MIL-D-23859. Type A01 features a single fixed delay, type A02 features two isolated delays, A03 features three delays, and A04 features 4 delays (single delay SIP available). Application Guide available. OPTIONS Opt.T= trailing edge design Opt. F =fast TTL, H =HCMOS, C =FACT Opt.A = auto-insertable design Opt.39 = -40 to +85°C operating temp. Tighter tolerances, faster rise times Low power design Military screening PACKAGE STYLES .500 [12.7] Max .015 [.4] .40 [10.2]Max .500 [12.7] Max 8 5 STANDARD DELAY TIMES 5nS, 10nS, 15nS, 20nS, 25nS, 50nS, 75nS, 100nS, 250nS, 500nS Intermediate values available on special order. ↓ ↑ SIDE SIDE VIEW .295 [7.5] Max. ↑ ↓ .285 [7.24] TOP VIEW .300±.01 [7.6±.25] 1 4 .120 [3] Min .250 [6.35] ← ←.300 [7.6] → ← .420 [10.67] → → .300 ±.01 [7.62±.25] ←.100 [2.54] .020 [.5] .10 [2.54] →← → PACKAGE STYLE 8P (8-Pin DIP) PACKAGE STYLE 8SM (8-Pin SM DIP) ← 14 SPECIFICATIONS Operating Temp: 0 to 70°C Delay Tol: ±2nS or ±5%, whichever greater Rise Time: 4nS Peak Soldering Temp: +230°C ↓ ↑ ← .800 [20.3] Max. → SIDE VIEW .295 [7.5] Max. .40 [10.2]Max .800 [20.3] Max → 8 ↑ ↓ .285 [7.24] TOP VIEW 1 7 .015 [.4] ← .600 ± .010 → [15.2 ± .25] → .120 [3] Min ←.100 [2.54] .300 [7.6] → ← ←.300 [7.6] → ← .420 [10.67] → .300±.01 [7.6±.25] .020 [.5] →← .10 [2.54] CHARACTERISTICS RCD Type A 01 A 01S A 01A G A 02A A 02S A A 02A G A 03 A 03S A 03A G A 03S A G A 04 A 04A G Independent Delays Single Single Single Dual Dual Dual Triple Triple Triple Triple Quadruple Quadruple P a cka g e Style 14P 8P 14S M 8S M 14P 8P 14S M 8S M 14P 8P 14S M 8S M 14P 14S M Circuit A B A B C D C D E F E F G G PACKAGE STYLE 14P (14-Pin DIP) PACKAGE STYLE 14SM (14-Pin SM DIP) CIRCUIT SCHEMATICS Circuit A 14 (VCC) 8 (OUT) Circuit B 8 (VCC) 5 (OUT) Circuit C 14 (VCC) 12 (OUT) 8 (OUT) Circuit D 8 (VCC) 7 (OUT) 5 (OUT) A01SAG Single DELAY DELAY DELAY DELAY DELAY DELAY 1 (IN) 7 (GND) 1 (IN) 4 (GND) 1(IN) 5 (IN) 7 (GND) 1(IN) 3 (IN) 4(GND) A02SAG Dual Circuit E 14(VCC) 12(OUT) 10 (OUT) 8 (OUT) Circuit F 8 (VCC) 7(OUT) 6 (OUT) 5 (OUT) Circuit G 14 (Vcc) 12 (OUT) 10 (OUT) 9 (OUT) 8(OUT) DELAY DELAY DELAY DELAY DELAY DELAY DELAY DELAY DELAY DELAY 1(IN) 3 (IN) 5 (IN) 7(GND) 1(IN) 2 (IN) 3 (IN) 4 (GND) 1(IN) 3 (IN) 4(IN) 5 (IN) 7 (GND) TEST CONDITIONS @25°C 1.) Input test pulse voltage: 3.2V 2.) Input pulse width: 50nS or 1.2x the total delay (whichever is greater) 3.) Input rise time: 2.0nS (0.75V to 2.4V) 4.) Delay measured at 1.5V on leading edge only with no loads on output (specify opt. T for trailing edge design) 5.) Supply Voltage (Vcc): 5V 6.) Pulse spacing: 2x pulse width minimum P/N DESIGNATION: A01A Type: A01, A01S, A01AG, etc. Options: T, H, F, C, A, 39 (leave blank if std.) Delay Time: 5NS, 10NS, etc. Packaging: B=Bulk (Magazine tube is standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) - 100NS - B W RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA077 Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 1 08