ATS135-102-CB

TEMPERATURE SENSITIVE PRECISION WIREWOUND RESISTORS TCR’S FROM +80 TO +6000 PPM RoHS Term.W is RoHS compliant & 260°C compatible RESISTORS CAPACITORS COILS DELAY LINES ATB SERIES- AXIAL LEAD, EPOXY ATS SERIES- AXIAL LEAD, SILICONE PTB SERIES- RADIAL LEAD, EPOXY Industry’s widest range of positive TCR resistors! Available on exclusive SWIFT TM delivery program! Additional sizes available--most popular shown below Choice of 15 standard temperature coefficients per Table 1 RCD’s AT and PT Series resistors offer inherent wirewound reliability and precision performance in all types of temperature sensing or compensating circuits. Sensors are wound with various alloys to achieve wide range of temperature sensitivity. ATS SERIES 350°C RATING RCD ATS Series offer precision wirewound resistor performance at economical pricing. Ceramic core and silicone coating provide high operating temperature. The coating ensures maximum protection from environmental and mechanical damage (envir. performance per MIL-PRF-26). RCD Type B ody Length ±.031 [.8] B ody Diameter ±.015 [.4] .093 [2.36] .093 [2.36] .188 [4.78] .188 [4.78] .218 [5.54] .250 [6.35] .312 [7.92] L ead 4500p p m Wattage Diameter Resis. @ 25°C (typ) R an g e .020 [.51] .020 [.51] .032 [.81] .032 [.81] .040 [1.02] .040 [1.02] .040 [1.02] .040 [1.02] .040 [1.02] .5 1.0 3.0 3.5 3.5 4.0 5.0 7.0 10.0 1Ω - 300Ω 1Ω - 1K Ω 1Ω - 1.5K 1Ω - 3K 1Ω - 2K 1Ω - 3K 1Ω - 4K 1Ω - 5K 1Ω - 10K ATB SERIES 175°C RATING RCD ATB Series are typically multi-layer bobbin-wound enabling higher resistance values. Encapsulated in moisture-proof epoxy, Series ATB meets the environmental requirements of MIL-R-93. Operating temperature range is -55°C to +175°C. Standard tolerances are ±0.1%, ±0.25%, ±0.5%, ±1%. RCD Type B ody Length ±.031 [.8] B ody Diameter ±.015 [.4] L ead Wattage Diameter @ 25°C (typ) .020 [.51] .025 [.635] .025 [.635] .025 [.635] .032 [.81] .032 [.81] .032 [.81] .032 [.81] .05 .10 .12 .15 .25 .33 .50 .60 4500p p m Resis. R an g e 1Ω - 3K 1Ω - 5K 1Ω - 8K 1Ω - 15K 1Ω - 20K 1Ω - 30K 1Ω - 76K 1Ω - 114K ATS110 .250 [6.35] ATS125 .406 [10.3] ATS135 .500 [12.7] ATS145 .812 [20.6] ATS150 .500 [12.7] ATS155 .625 [15.9] ATS160 .875 [22.2] ATB200 .250 [6.35] .100 [2.54] ATB202 .250 [6.35] .125 [3.18] ATB204 .375 [9.53] .142 [3.60] ATB206 .375 [9.53] .187 [4.75] ATB100 .350 [8.89] .250 [6.35] ATB101 .500 [12.7] .250 [6.35] ATB102 .750 [19.1] .250 [6.35] ATB104 .750 [19.1] .375 [9.53] ATS170 1.220 [31.0] .312 [7.92] ATS175 1.780 [45.2] .375 [9.53] PTB SERIES 175°C RATING RCD PTB Series offer the same reliability and precision performance as the ATB series except in a radial lead design. RCD Type B ody L ead L ead 4500p p m Body Dia. Watts Length Diameter Spacing Resis. ±.015 [.4] @25°C ±.031 [.8] (typ.) ±.015 [.4] R an g e .25 .33 1Ω - 15K 1Ω - 40K TABLE 1. SERIES ATB, ATS, ATB RESISTANCE RANGE Temp. T.C. Coef. Tolerance (ppm/°C) (ppm/°C) +80 ±20 +100 ±20 +140 ±40 +180 ±40 +400 ±40 +650 ±50 +1000 ±100 +1400 ±200 +2600 ±200 +3200 ±200 +3500 ±300 +3850 (Pt) ±80 +3900 (Cu) ±300 +4500 (NiFe) ±300 +6000 (Ni) ±400 Resis. Range Multiplier ( x 4500p p m R es. R an g e) 5.3 5.3 5.0 2.0 4.5 2.0 3.0 3.2 3.3 2.0 2.7 .4 .083 1.00 .33 In order to determine the available resistance range for each TC, use the multiplier times the 4500 ppm resistance range. Example: a resistor with a TC of +3200 ppm can be manufactured with a resistance value twice as high as the same resistor with a TC of 4500 ppm. A resistor with a TC of +6000 ppm can only reach a third of the resistance value available with 4500 ppm wire. PTB401 .312 [7.92] .250 [6.35] .025 [.64] .200 [5.08] PTB406 .500 [12.7] .375 [9.53] .032 [.81] .200 [5.08] P/N DESIGNATION: RCD Type ATS135 - 1000 - FB 452 W Resis.Code ≤1%: 3 signif. figures & multiplier, (1R00=1Ω,10R0=10Ω,1000=100Ω,1001=1K, etc.) Resis.Code 2%-10%: 2 signif. figures & multiplier, (1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K, etc.) Tolerance @ 25°C: J=5%, H=3%, G=2%, F=1%, D=0.5%, C=0.25%, B=0.1% Packaging: B = Bulk, T = Tape & Reel (axial lead only) Temperature Coefficient: 80 = 80ppm; 100ppm and higher, use 3 digit code: 101 =100ppm, 452 =4500 ppm, etc. Termination W= lead-free, Q= tin/lead (leave blank if either is acceptable, in which case RCD will select based on lowest price and quickest delivery) FA079 RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 85