BC630-105-J

RADIAL LEAD MEGOHM RESISTORS RESISTORS CAPACITORS COILS DELAY LINES BC SERIES RoHS Term.W is RoHS compliant & 260°C compatible Wide resistance range up to 1000 MegOhm TC’s as low as ±25ppm available Standard tolerance is ±1%; 0.1% available Significant space savings over axial lead resistors Available on Tape & Reel Economically priced Precision quality, excellent stability, low inductance New SM model Space-saving megohm resistors! RCD Series BC resistors are designed for precision highmegohm requirements where space is at a premium. Operating temperature range is -55°C to +175°C. Type BC632 features the smallest body size. Type BC630 features an increased voltage rating, wider resistance range, and the lowest cost. BC633 features two resistors within single package. Units are epoxy encapsulated for superior environmental protection. OPTIONS Option P: increased pulse capability Option H: increased voltage rating Option G: gullwing SM lead forming (avail. on 24mm T&R) Option EQ: 24 hour burn in (or ER -100 hour burn in) Numerous additional options available including custom marking, matched sets, military screening, etc. SPECIFICATIONS RCD Type B C 630 B C 632 B C 633 Wattage .75W .75W .25W per resis. Max. Voltage* 500V 400V 400V per resis. Dielectric Strength** 400V 400V 400V Resistance Range*** 300K to 1000M 300K to 100M 300K to 100M A ±.015 [.38] .310 [7.87] .290 [7.37] .290 [7.37] B ±.015 [.38] .330 [8.38] .290 [7.37] .290 [7.37] C ±.01 [.25] .118 [3.0] .095 [2.41] .095 [2.41] D ±.002 [.05] .024 [.6] .024 [.6] .024 [.6] E ±.015 [.38] .150 [3.81] .200 [5.08] .100 [5.08] * Maximum working voltage is determined by E = factory. PR, E should not exceed value listed. ** Increased dielectric strength available *** Lower and higher values available on custom basis, consult TYPICAL PERFORMANCE CHARACTERISTICS Overload (1.5x rated voltage, 5 sec) Load Life (1000 hours) Dielectric Strength Resistance to Solder Heat Moisture Resistance Insulation Resistance (dry) Operating Temperature Range Shelf Life at 25°C Temperature Coefficient Voltage Coefficient (tightened VC levels available) 300K -100MΩ >100MΩ 300K - 1MΩ 1MΩ - 100MΩ 100M - 500MΩ 500M - 1GΩ ±0.5% ∆R ±0.5% ∆R 400V A C ±0.1% ∆R ±0.5% ∆R 10,000 Megohms Min. -55°C to 175°C ±0.2% ∆R (1 Yr.) 100ppm/°C std (25, 50, 80ppm avail) 350ppm/°C std (100,200ppm avail) -20ppm/ V Typ. -30ppm/ V Typ. -50ppm/ V Typ. -80ppm/ V Typ. BC630 & BC632 (single resistor) BC633 (dual resistor) |← A →| →| C |← |← A →| →| C |← ↑ B ↑ B ↑ .75 [19] Min. ↓ ←E→ → ←D ↑ .75 [19] Min. E E E ↓ → ←D ↓ OPT. G GULLWING DESIGN .075 ↓ BC630G .15 BC632G .075 .15 BC633G .075 .15 ← ← →.100 → .200 .07 .08 .07 .13 .07 .03 P/N DESIGNATION: RCD Type BC630 - 1005 - F B 101 W Options: P, H, G, ER, EQ (leave blank if std) DERATING % OF RATED POWER 100 75 50 25 Resis.Code 0.1%-1%: 3 signif. figures & multiplier, (e.g. 3003=300KΩ, 1004=1MΩ, 1006=100MΩ) Resis.Code 2%-5%: 2 signif. figures & multiplier, (e.g. 304=300KΩ, 105=1MΩ, 107=100MΩ). When BC633 is comprised of 2 values, separate with /, e.g. 905/105 Tol. Code: J=5%, G=2%, F=1%, D=0.5%, C=0.25%, B=0.1% Packaging: B = Bulk, T = Tape & Reel Temp. Coefficient: 25 = 25ppm, 50 = 50ppm, 80 = 80ppm, 101 = 100ppm, 201=200ppm, 351=350ppm Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable, in which case RCD will select based on lowest price and quickest delivery) 0 175 25 50 75 100 AMBIENT TEMPERATURE (°C) 125 150 RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA035B Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 71 321321 321321 321321 321321 321321 21 21 21 21 21 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 21 21 21 21 21