CFZ2537-105-JT

HIGH VOLTAGE CARBON RESISTORS 1/8 WATT to 3 WATT RESISTORS CAPACITORS COILS DELAY LINES CFZ SERIES High pulse voltage capability Low cost, prompt delivery Standard resistance range: 1K - 22MΩ Surface Mount version available! Inherently low inductance RoHS Term.W is RoHS compliant & 260°C compatible Type CFZ was developed as a low-cost alternative to high voltage thick film and carbon composition resistors. Carbonized film processing enables pulse capabilities to 12KV! Elements are protected by moisture resistant epoxy coating for excellent environmental performance. Application assistance available. OPTIONS Option 25 - Hot solder dipped leads Option 37 - Group A screening per Mil-R-39008 Numerous design modifications are available (custom marking, uninsulated, specialty non-inductive/ high frequency design, cut & formed leads, etc.) RCD Type CFZ12 CFZ25 CFZ50S CFZ75 CFZ100 CFZ200 CFZ300 1 2 H L d D Inch [mm] Wattage .125W .25W .5W .75W 1.0W 2.0W 3.0W Max Working Voltage 1 250V 300V 400V 500V 600V 700V 800V Peak Pulse Voltage 2 2K V 3K V 5K V 6K V 7K V 10K V 12K V L .145±.032 [3.68±.8] .250±.032 [6.35 ±.8] .354±.032 [8.99±.8] .354±.032 [8.99±.8] .470±.050 [11.9±1.3] .600±.050 [15.2±1.3] .710±.080 [18.0±2.0] D .062±.02 [1.57±.51] .090±.02 [2.2 ±.51] .125±.02 [3.18±.51] .148±.02 [3.76±.51] .180±.025 [4.57±.64] .200±.025 [5.08±.64] .250±.050 [6.35±1.27] d ±.003 [.08] .020 [.51] .024 [.61] .028 [.71] .031 [.79] .031 [.79] .031 [.79] .031 [.79] H3 1.06±.08 [27±2] 1.06±.08 [27±2] 1.06±.08 [27±2] .980 [25] Min 1.06 [27] Min 1.06 [27] Min 1.26 [32] Min Maximum working voltage = (PR)1/2, voltage not to exceed the value listed. Increased voltage ratings available Peak pulse voltage is highly dependent on pulse waveform and resistance value. Voltage levels given indicate the maximum levels for the series. These levels are not attainable for all values and pulse waveforms. Consult factory for application assistance. 3 Lead length is for bulk packaged parts, taped parts may be shorter. Non standard lengths and cut&formed leads available) DERATING RCD CFZ12 through CFZ200 power ratings must be derated above 70°C, derate CFZ300 above 40°C. 100 % OF RATED POWER SPECIFICATIONS Resistance Range Standard Tolerance Operating Temp. Range 1K to 22MΩ† ±5% (2%, 10% avail) -55° to +165°C† CFZ12 =400V, CFZ25-75 = 500V, CFZ100-300=1000V 0.05%/°C typ. 0.1%/°C typ. 0.15%/°C typ. 80 CFZ300 CFZ12-CFZ200 60 40 20 0 30 50 70 90 110 AMBIENT TEMP. ( °C ) 130 150 170 165 Dielectric Strength Temp.Coef.1K-100K 100K-1M 1M -10M † Expanded range available, consult factory. TYPICAL PERFORMANCE CHARACTERISTICS Load Life Shelf Life Short Time Overload Solder Heat Moisture Temperature Cycling Insulation Resistance ±3% ±1%/yr ±1% ±0.3% ±2% ±0.5% 10,000MΩ PART NUMBER DESIGNATION: CFZ25 - 101 - J TW RCD Type Options: 37, 25 (leave blank if standard) 3-Digit Resis.Code: 2 signif. digits & multiplier (102=1KΩ, 103=10K, 104=100K, 105=1M, 106=10M) Tolerance Code: J=5% (std), G=2%, K=10% Packaging: B = Bulk, T = Tape & Reel Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable, in which case RCD will select based on lowest price and quickest delivery RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA022B Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 75