CN1206A-10R0-G

CN1206A-10R0-G

  • 厂商:

    RCD

  • 封装:

  • 描述:

    CN1206A-10R0-G - THICK FILM CONCAVE CHIP ARRAYS - RCD COMPONENTS INC.

  • 详情介绍
  • 数据手册
  • 价格&库存
CN1206A-10R0-G 数据手册
THICK FILM CONCAVE CHIP ARRAYS RESISTORS CAPACITORS COILS DELAY LINES CN SERIES Resistor Arrays ZN SERIES Jumper Arrays Popular self-aligning concave termination pads (convex termination style also available,see SMN series) Industry’s widest selection and lowest cost! 1Ω to 10MΩ, 1% to 5%, 6 sizes, 5 circuit schematics 2 to 8 resistors per array reduces mounting costs ZN Series zero ohm jumpers are 1Amp, 50mΩ max RoHS Term.W is RoHS compliant & 260°C compatible Concave Termination Alumina Substrate RCD’s Series CN resistor and ZN jumper chip arrays not only enable significant pcb space savings, but a sizeable cost savings over the use of individual components. The savings in assembly cost, by placing a single chip instead of multiple chips, more than pays for the cost of these components. Circuits comprisied of multiple values are available on a custom basis. 4 PIN: CN0606 → P← ↑ W ↓ ----↓ ↑ 10 PIN MINI: CN1608 T 1 ↑ W Config. A → →←← P ↓ ----↑ 9 8 76 T 10 1 2 34 5 ←L→ → H← L 8 PIN: CN0804, CN1206, CN2012 ↑ W → →←← P --↓ ↑ 10 PIN STANDARD: CN2512 ↑ W ↓ --↓ ↑ T ↓ --- L RCD Type CN0606 CN0804 CN1206 CN1608 CN2012 CN2012 CN2512 CN2512 Config A A A E A B** C D → H← 1 Config. A Working Voltage 50V 25V 50V 25V 50V 50V 50V 50V 1 Config. B Res. Range 1% Tol 1Ω - 1M 1Ω - 1M 1Ω - 1M ** ** ** ** ** →P← L Res. Range 2 & 5% Tol 1Ω - 10M 1Ω - 1M 1Ω - 10M 22Ω - 1M 10Ω - 1M 10Ω - 1M 22Ω - 1M 22Ω - 1M L ±.01 [.25] .063 [1.6] .079 [2] .126 [3.2] .157 [4] .200 [5.08] .200 [5.08] .252 [6.4] .252 [6.4] Rated Pow er* 62mW 62mW 62mW 62mW 125mW 62mW 62mW 62mW TC (ppm/°C) 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm DERATING % OF 70°C RATING SUGGESTED PAD LAYOUT RCD Type F i g. A CN0606 (4-pin) 1 .016 [.4] CN0804 (8-pin) 1 .012 [.3] CN1206 (8-pin) 1 .016 [.4] CN1608 (10-pin) 2 .016 [.4] CN2012 (8-pin) 1 .034 [.87] C N2512 (10-pin) 1 .031 [.79] B .016 [.4] .008 [.2] .016 [.4] .016 [.4] .016 [.4] .019 [.48] C .032 [.8] .024 [.6] .032 [.8] .040 [1] .040 [1] .045 [1.1] D .036 [.9] .020 [.5] .036 [.9] .040 [1] .080 [2] .094[2.4] 100 75 50 25 0 -55 50 70 90 110 130 150 170 AMBIENT TEMPERATURE (°C) D C Fig. 1 A B D C Fig. 2 A TYPICAL PERFORMANCE CHARACTERISTICS Operating Temp. Range Short time Overload (2.5X rated W, 5 sec) Resistance to Solder Heat (260°C, 10 sec) Moisture Res. (90-95% RH, 40°C,100 hrs) High Temp. Exposure (125°C, 100 hrs) Load Life (1000 hrs at rated W) Insulation Resistance Dielectric Withstanding Voltage -55°C to +155°C ±2%+0.1Ω max. ±1%+0.1Ω max. ±3%+0.1Ω max. ±1%+0.1Ω max. ±3%+0.1Ω max. 10,000 Megohm 400V P/N DESIGNATION: CN 1206 A - 102 - J T Type (CN, ZN) Chip Size Circuit Configuration: A, B, C, D, E Resis.Code 1%: 3 signif. figures & multiplier, e.g. 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1KΩ, etc. Resis.Code 2%-5%: 2 signif. figures & multiplier, e.g. 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1KΩ, etc. Leave blank on ZN zero-ohm jumper arrays (.05Ω max) Tolerance Code: J=5%(std), G=2%, F=1% Leave blank on ZN zero-ohm jumper arrays Packaging: B = Bulk, T = Tape & Reel Termination: W= Lead-free (standard), Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA101A Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 31 32121 121 32121 43232 3 43212121 1 121 432121 3 32121 21 32121 32 ← .012 [.3] B 21 21 21 21 21 21 21 321321 321321 321321 321321 321321 321321 321321 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21321 21321 21 21 21 21 21 21 21 21 21 21 * Rated power is per resistor element at 70°C ** Consult factory for availability ↑ ↑ →H← Config. E 10 9 87 6 10 9 8 76 T --- → H← W±.008 [.2] 12 34 5 12 345 Config. C P±.008 [.2] .0315 [.8] .02 [.5] .0315 [.8] .0315 [.8] .050 [1.27] .050 [1.27] .050 [1.27] .050 [1.27] H±.006 [.15] .022 [.55] .016 [.4] .022 [.55] .024 [.6] .024 [.6] .024 [.6] .024[ .6] .024[ .6] Config. D T typ. .012 [.3] .010 [.25] .016 [.4] .016 [.4] .022 [.56] .022 [.56] .018 [.45] .018 [.45] .063 [1.6] .039 [1] .063 [1.6] .083 [2.1] .126 [3.2] .126 [3.2] .126 [3.2] .126 [3.2] A C W
CN1206A-10R0-G
物料型号: - CN0606 - CN0804 - CN1206 - CN1608 - CN2012 - CN2512

器件简介: RCD的CN系列电阻和ZN跳线芯片阵列不仅能够显著节省PCB空间,还能节省使用单个组件的成本。通过放置单个芯片而不是多个芯片,节省的组装成本远大于这些组件的成本。

引脚分配: - CN0606(4-pin) - CN0804(8-pin) - CN1206(8-pin) - CN1608(10-pin) - CN2012(8-pin) - CN2512(10-pin)

参数特性: - 工作温度范围:-55°C至+155°C - 短时过载:额定功率的2.5倍,5秒内不超过+2%+0.1最大值 - 耐焊热性:260°C,10秒内±1%+0.1最大值 - 耐湿性:90-95%RH,40°C,100小时内+3%+0.1最大值 - 高温暴露:125°C,100小时内±1%+0.1最大值 - 负载寿命:额定功率下1000小时+3%+0.1最大值 - 绝缘电阻:10,000兆欧姆 - 介质耐压:400V

功能详解: 该系列电阻和跳线芯片阵列提供了多种配置,包括不同的尺寸、电路配置和电阻范围,以满足不同的应用需求。

应用信息: 适用于需要节省空间和成本的应用,如定制电路,可以在一个芯片上提供多个电阻值。

封装信息: - 封装类型包括A、B、C、D、E,对应不同的尺寸和配置。 - 封装代码:B=散装,T=卷带包装。 - 端头处理:W=无铅(标准),Q=锡/铅(如果两者都可接受则留空)。
CN1206A-10R0-G 价格&库存

很抱歉,暂时无法提供与“CN1206A-10R0-G”相匹配的价格&库存,您可以联系我们找货

免费人工找货