0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
P01-10NS-101BQ

P01-10NS-101BQ

  • 厂商:

    RCD

  • 封装:

  • 描述:

    P01-10NS-101BQ - PASSIVE SIP DELAY LINES, SINGLE OUTPUT - RCD COMPONENTS INC.

  • 详情介绍
  • 数据手册
  • 价格&库存
P01-10NS-101BQ 数据手册
PASSIVE SIP DELAY LINES, SINGLE OUTPUT RESISTORS CAPACITORS COILS DELAY LINES SMP01S - 4 PIN SM P01S - 4 PIN DIP P01 - 14 PIN DIP & SM S01 - 3 PIN SIP Industry’s widest range: 0.1nS to 1000nS Low cost, prompt delivery! Wide range of package styles Detailed application handbook available RoHS Term.W is RoHS compliant RCD’s passive delay lines are a lumped constant design, incorporating high-performance inductors and multilayer capacitors in a molded case ensuring stable transmission, low temperature coefficient, and excellent environmental performance. Total D elay Tolerance Temperature Coefficient Insulation Resistance Dielectric Strength Distortion Operating Temp. Range Operating Freq. (BW) Attenuation: (dependent on impedance, low values have lower attenuation) S01: ±5% or ±0.2nS (whichever is greater) P01: ±5% or ±2nS (whichever is greater) P01S/SMP01S: ±20% ±100ppm/°C Max. 1000MΩ Min. 100V D C ±10% Max. OPTIONS Custom circuits, delay and/or impedance values MIL-D-23859 screening Increased operating temperature range Low profile package (Type P01 only) Tighter tolerance or temperature coefficient Faster rise times RCD Type Delay Time, TD (nS) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 10 20 30 40 50 60 75 100 120 150 180 200 220 250 300 375 500 600 750 1000 Max. Rise Time, TR * (nS) 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.6 1.6 1.6 1.7 1.7 1.8 2.0 2.2 2.4 2.6 2.8 3.5 5.5 6.5 8 10 12 15 20 24 30 36 40 44 50 60 75 100 120 150 200 Available Impedance Values (±10% ) 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 100Ω 50Ω, 100Ω, 200Ω 50Ω, 100Ω, 200Ω 50Ω, 100Ω, 200Ω, 300Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 0 to70°C (Opt.39= -40 to 85°C, ER= -55 to125°C) BW (MHz)=.35/(TR nS x 1000) S 01: 2% P01: 10nS-300nS 10% , >300nS 20% P01S/SMP01S: 20% Type P01S 4-Pin DIP, Type SMP01S 4-Pin Surface Mount 4 3 P01S 1 4 1 SMP01S .236 [6] 2 3 2 .100 [2.54] → .018 [.46]→ .200 [5] ↑ ↓ ← ← .025[.6] ↑ → ←.010 ← [7.6] → 0.300 [.254] 4 IN 1 GND 3 OUT 2 GND P 01S & SMP01S .240 [6] Max. .018 [.46]→ ← .100 [2.54] → ↑ ↓ ← .236 [6] ← → .42[10.7] ← Max. → .30[7.6] Type S01 3-Pin SIP S 01 → ← .13 [3.3] → .490 [12.5] max. ← Max. ↑ .375 [9.5] Max. IN 1 3 21 ↓ ↓ ↑.02 [.5] .100[2.54] Min. → ← .100 [2.54] →← ↑ ← .300 → .020 [.5] [7.62] 3 OUT 2 GND Type P01 (.300” Profile) & P01A (.200”)14-Pin DIP ←.800 [20.3] Max. → SIDE VIEW .015 ↓ [.38] ↑ .12 [3] min .020→ ← → ←.10 [2.54] [.5] ← .600±.010 → [15.2±.25] .300 [7.6] max.(std), .200 [5.1] Opt. A 1 IN 14 GND 8 GND 7 OUT .300±.01 [7.6±.25] Type P01G (.300” Profile) & P01AG (.200”) 14-Pin Surface Mount ←.800 [20.3] Max. → 14 8 .285 [7.24] .300 [7.6] max.(std), .200 [5.1] Opt. A →← .020 [.5] → ← .10 [2.54] . ← 300 [7.6]→ ←.420[10.7]max → .015[.38] TEST CONDITIONS: Pulse width at 3x total delay, pulse input at 2.5V, delay measured at 25°C on leading edge with no loads on output. Rise time measured at 10% to 90% points. P/N DESIGNATION: * Faster rise times available on some models RCD Type Options: as assigned by RCD (leave blank if std.) Delay Time (0.1NS, 1NS, 10NS, 100NS, 1000NS, etc) Impedance: 50R=50Ω, 75R=75Ω, 101=100Ω, 201=200Ω, 301=300Ω, 501=500Ω Packaging: B=Bulk (magazine tube is standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA105 Sale of this product is in accordance with GF-061. Specifications subject to change without notice. ↓ P 01, P 01A , P01G, P 01A G TOP VIEW 1 7 ↓ 1 IN 14 GND 8 GND 7 OUT P01 - 10NS - 101 B W 110
P01-10NS-101BQ
1. 物料型号: - P01S、SMP01S、S01、P01、P01A、P01G、P01AG等型号,这些型号代表了不同的延迟线产品。

2. 器件简介: - 这些是被动式延迟线,采用集总参数设计,结合高性能电感和多层陶瓷电容器,封装在模塑外壳中,确保稳定传输、低温度系数和优异的环境性能。

3. 引脚分配: - P01S和SMP01S为4引脚DIP和表面贴装封装。 - S01为3引脚SIP封装。 - P01(.300" Profile)和P01A(.200")为14引脚DIP封装。 - P01G(.300" Profile)和P01AG(.200")为单引脚表面贴装封装。

4. 参数特性: - 延迟时间范围从0.1nS到1000nS。 - 最大上升时间从1.6nS到5.5nS不等,取决于型号。 - 可用阻抗值为±10%的50、75、55、93或100欧姆等。

5. 功能详解应用信息: - 这些延迟线提供广泛的延迟和阻抗选项,适用于需要精确控制信号延迟的各种应用,如通信、音频处理等。 - 提供定制电路、延迟和阻抗值,以及MIL-D-23859筛选、增加工作温度范围、低轮廓封装等选项。

6. 封装信息: - 提供了多种封装风格,包括DIP、SIP和表面贴装封装,以满足不同的应用需求。
P01-10NS-101BQ 价格&库存

很抱歉,暂时无法提供与“P01-10NS-101BQ”相匹配的价格&库存,您可以联系我们找货

免费人工找货