PASSIVE SIP DELAY LINES, SINGLE OUTPUT
RESISTORS CAPACITORS COILS DELAY LINES
SMP01S - 4 PIN SM P01S - 4 PIN DIP P01 - 14 PIN DIP & SM S01 - 3 PIN SIP
Industry’s widest range: 0.1nS to 1000nS Low cost, prompt delivery! Wide range of package styles Detailed application handbook available
RoHS
Term.W is RoHS compliant
RCD’s passive delay lines are a lumped constant design, incorporating high-performance inductors and multilayer capacitors in a molded case ensuring stable transmission, low temperature coefficient, and excellent environmental performance.
Total D elay Tolerance Temperature Coefficient Insulation Resistance Dielectric Strength Distortion Operating Temp. Range Operating Freq. (BW) Attenuation: (dependent on impedance, low values have lower attenuation) S01: ±5% or ±0.2nS (whichever is greater) P01: ±5% or ±2nS (whichever is greater) P01S/SMP01S: ±20% ±100ppm/°C Max. 1000MΩ Min. 100V D C ±10% Max.
OPTIONS
Custom circuits, delay and/or impedance values MIL-D-23859 screening Increased operating temperature range Low profile package (Type P01 only) Tighter tolerance or temperature coefficient Faster rise times
RCD Type Delay Time, TD (nS) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 10 20 30 40 50 60 75 100 120 150 180 200 220 250 300 375 500 600 750 1000 Max. Rise Time, TR * (nS) 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.6 1.6 1.6 1.7 1.7 1.8 2.0 2.2 2.4 2.6 2.8 3.5 5.5 6.5 8 10 12 15 20 24 30 36 40 44 50 60 75 100 120 150 200 Available Impedance Values (±10% ) 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 50Ω or 75Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 55Ω, 93Ω or 100Ω 100Ω 50Ω, 100Ω, 200Ω 50Ω, 100Ω, 200Ω 50Ω, 100Ω, 200Ω, 300Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω 50Ω, 100Ω, 200Ω, 300Ω, 500Ω
0 to70°C (Opt.39= -40 to 85°C, ER= -55 to125°C) BW (MHz)=.35/(TR nS x 1000)
S 01: 2% P01: 10nS-300nS 10% , >300nS 20% P01S/SMP01S: 20%
Type P01S 4-Pin DIP, Type SMP01S 4-Pin Surface Mount
4 3
P01S
1 4 1 SMP01S .236 [6] 2 3 2 .100 [2.54] → .018 [.46]→
.200 [5]
↑ ↓
←
←
.025[.6]
↑
→ ←.010 ← [7.6] →
0.300
[.254]
4 IN 1 GND
3 OUT 2 GND
P 01S & SMP01S
.240 [6] Max. .018 [.46]→ ← .100 [2.54] →
↑ ↓
←
.236 [6]
← → .42[10.7] ← Max. →
.30[7.6]
Type S01 3-Pin SIP
S 01
→ ← .13 [3.3] → .490 [12.5] max. ← Max. ↑ .375 [9.5] Max. IN 1 3 21 ↓ ↓ ↑.02 [.5] .100[2.54] Min. → ← .100 [2.54] →← ↑ ← .300 → .020 [.5] [7.62]
3 OUT 2 GND
Type P01 (.300” Profile) & P01A (.200”)14-Pin DIP
←.800 [20.3] Max. →
SIDE VIEW
.015 ↓ [.38] ↑ .12 [3] min .020→ ← → ←.10 [2.54] [.5] ← .600±.010 → [15.2±.25] .300 [7.6] max.(std), .200 [5.1] Opt. A
1 IN 14 GND 8 GND
7 OUT
.300±.01 [7.6±.25]
Type P01G (.300” Profile) & P01AG (.200”) 14-Pin Surface Mount
←.800 [20.3] Max. →
14 8
.285 [7.24]
.300 [7.6] max.(std), .200 [5.1] Opt. A
→←
.020 [.5]
→
←
.10 [2.54]
. ← 300 [7.6]→ ←.420[10.7]max →
.015[.38]
TEST CONDITIONS: Pulse width at 3x total delay, pulse input at 2.5V, delay measured at 25°C on leading edge with no loads on output. Rise time measured at 10% to 90% points.
P/N DESIGNATION:
* Faster rise times available on some models
RCD Type Options: as assigned by RCD (leave blank if std.) Delay Time (0.1NS, 1NS, 10NS, 100NS, 1000NS, etc) Impedance: 50R=50Ω, 75R=75Ω, 101=100Ω, 201=200Ω, 301=300Ω, 501=500Ω Packaging: B=Bulk (magazine tube is standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA105 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
↓
P 01, P 01A , P01G, P 01A G
TOP VIEW
1 7
↓
1 IN 14 GND 8 GND
7 OUT
P01
- 10NS - 101 B W
110