SMN16 SERIES
RoHS
Term.W is RoHS compliant & 260°C compatible
Choice of gull-wing or J-lead styles! RCD’s SMN series feature SOIC-type packaging with gull-wing leads, or SOJ type with leads formed under the body for even greater space savings. The molded construction results in excellent moisture resistance, and compliant leads prevent solder joint fatigue under vibration and thermal shock conditions. Epoxy-molded for excellent environmental performance Standard tolerance: ±5% (1%, 2% available) Temperature coefficient: ±100ppm/°C typical Available on 24mm embossed plastic tape or magazine tube
POWER RATING
Config. Type A B Single Resistor @ 25°C .25W .125W @ 70°C .16W .08W P ackag e @ 25°C .75W .75W @ 70°C .5W
DERATING
PACKAGE (W)
.75 .65
16-Pin
SINGLE RESISTOR (W)
.5W
.250 .125
0
Config. A Config. B
STANDARD CONFIGURATIONS
(Custom circuits available.)
1
RC D SM 100 N1 1F 6A S
THICK FILM SURFACE MOUNT NETWORKS SMALL OUTLINE MOLDED DIP
RESISTORS CAPACITORS COILS DELAY LINES
25
50 75 AMBIENT TEMP. (°C)
100
125
150
Config. A (Isolated resistors) 16 PIN/8RES
Pin #1
S Type (SOIC)
J Type (SOJ)
Config. B (bussed resistors) 16 PIN/15RES
Pin #1
.016[.4] → ←
.016 → [.4]
←
←
.43±.02 [11±0.5]
→
← .43±.02
[11±0.5]
→
SPECIFICATIONS, TYPICAL
Resistance Range Resistance Tolerance Voltage Rating Temperature Range Temperature Coefficient T.C. Tracking Voltage Coefficient Thermal Shock Short-Time Overload Resistance to Solder Heat Moisture Resistance Load Life (1000 hours) Dielectric Strength 33Ω to 3.3 Meg ±1, 2, 5, 10% 25VDC or √PR (whichever is less) -55 to +150°C ±200ppm/°C 50ppm/°C
