SMN16AS-1004-J

SMN16 SERIES RoHS Term.W is RoHS compliant & 260°C compatible Choice of gull-wing or J-lead styles! RCD’s SMN series feature SOIC-type packaging with gull-wing leads, or SOJ type with leads formed under the body for even greater space savings. The molded construction results in excellent moisture resistance, and compliant leads prevent solder joint fatigue under vibration and thermal shock conditions. Epoxy-molded for excellent environmental performance Standard tolerance: ±5% (1%, 2% available) Temperature coefficient: ±100ppm/°C typical Available on 24mm embossed plastic tape or magazine tube POWER RATING Config. Type A B Single Resistor @ 25°C .25W .125W @ 70°C .16W .08W P ackag e @ 25°C .75W .75W @ 70°C .5W DERATING PACKAGE (W) .75 .65 16-Pin SINGLE RESISTOR (W) .5W .250 .125 0 Config. A Config. B STANDARD CONFIGURATIONS (Custom circuits available.) 1 RC D SM 100 N1 1F 6A S THICK FILM SURFACE MOUNT NETWORKS SMALL OUTLINE MOLDED DIP RESISTORS CAPACITORS COILS DELAY LINES 25 50 75 AMBIENT TEMP. (°C) 100 125 150 Config. A (Isolated resistors) 16 PIN/8RES Pin #1 S Type (SOIC) J Type (SOJ) Config. B (bussed resistors) 16 PIN/15RES Pin #1 .016[.4] → ← .016 → [.4] ← ← .43±.02 [11±0.5] → ← .43±.02 [11±0.5] → SPECIFICATIONS, TYPICAL Resistance Range Resistance Tolerance Voltage Rating Temperature Range Temperature Coefficient T.C. Tracking Voltage Coefficient Thermal Shock Short-Time Overload Resistance to Solder Heat Moisture Resistance Load Life (1000 hours) Dielectric Strength 33Ω to 3.3 Meg ±1, 2, 5, 10% 25VDC or √PR (whichever is less) -55 to +150°C ±200ppm/°C 50ppm/°C