20001425

• OVC III and PD3 rating • Continuous max withstanding voltage 528VAC • UL certified input 90-318VAC • Operating temperature range: -40°C to +85°C • Class II installations (without FG) • EN55032 class “B” with floating outputs • No load power consumption 1726 x 103 hours >1585 x 103 hours continued on next page www.recom-power.com REV.: 0/2021 PA-3 RAC05-K/PD3/H AC/DC Converter Series Specifications (measured @ Ta= 25°C, 277VAC, full load and after warm-up unless otherwise stated) Derating Graph (@ Chamber and natural convection 0.1m/s) 100 Output Load [%] 90 80 70 60 50 40 30 5Vout 12Vout 20 10 0 -40 -20 0 20 40 60 70 80 85 100 120 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report Number Audio/video, information and communication technology equipment Safety requirements (LVD) 200811140GZU-001 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements E470721 Standard IEC62368-1:2014, 2nd Edition EN62368-1:2014 + A11:2017 UL61010-1 CAN/CSA C22.2 No. 61010-1 EN61010-1:2010 190415125GZU-001 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements (CB Scheme) IEC61010-1:2010 + A1:2016 3rd Edition EAC RU-AT.03.67361 RoHS2 TP TC 004/020, 2011 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility Standard / Criterion IEC/EN61204-3:2018, Class B EN55032:2015, Class B Electromagnetic compatibility of multimedia equipment – Emission Requirements (8) Electromagnetic compatibility of household appliances, electric tools and similar apparatus - Emission Requirements EN55014-1:2006+A2:2011 LCS180508025BE Information technology equipment - Immunity characteristics - Limits and methods of measurement EN55024:2010+A1:2015 Electromagnetic compatibility of household appliances, electric tools and similar apparatus - Immunity Requirements EN55014-2:2015 Air: ±15, 8, 4, 2kV EN61000-4-2: 2009, Criteria A Contact: ±8, 4, 2kV 10V/m, 80MHz-1GHz 3V/m, 1.5GHz-2GHz EN61000-4-3: 2006 + A1:2009, Criteria A 1V/m, 2GHz-2.7GHz AC In Port: ±2.0kV EN61000-4-4:2012, Criteria A DC Out Port: ±2.0kV AC IN Port: L-N ±4.0kV EN61000-4-5:2014+A1:2017, Criteria A DC Out Port: ±0.5kV ESD Electrostatic discharge immunity test Radiated, radio-frequency, electromagnetic field immunity test Fast Transient and Burst Immunity Surge Immunity Immunity to conducted disturbances, induced by radio-frequency fields Power Magnetic Field Immunity 10Vrms EN61000-4-6:2014, Criteria A 50Hz, 30A/m EN61000-4-8:2010, Criteria A continued on next page www.recom-power.com REV.: 0/2021 PA-4 RAC05-K/PD3/H AC/DC Converter Series Specifications (measured @ Ta= 25°C, 277VAC, full load and after warm-up unless otherwise stated) EMC Compliance Condition Standard / Criterion Dips 100% Dips 60, 30, 20% Interruptions > 95% Voltage Dips and Interruptions EN61000-4-11:2004+A1:2017, Criteria B EN61000-4-11:2004+A1:2017, Criteria C EN61000-4-11:2004+A1:2017, Criteria C Limits of Voltage Fluctuations & Flicker EN61000-3-3:2013 Notes: Note8: If output is connected to GND, please contact RECOM tech support for advice DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value black plastic, (UL94V-0) polyurethane, (UL94V-0) FR4, (UL94V-0) case/baseplate potting PCB Material Dimension (LxWxH) 52.5 x 27.4 x 23.0mm Weight 58g typ. Dimension Drawing (mm) 52.5 27.4 embossed logo 51.5 Pin Connections Pin # Single 1 VAC in (N) (L2) 2 VAC in (L) (L1) 3 -Vout 4 +Vout 23.0 26.3 20.32 6.0 ±1.0 Ø1.0 +0.15/-0.05 Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm Recommended Footprint Details 1 2 1 3.39 4 18x2.54= 45.72 Top View 2. 54 3 10.16 3.50 Bottom View 4 3 2 2.54 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 490.0 x 56.0 x 40.0mm Packaging Quantity 15pcs Storage Temperature Range Storage Humidity -40°C to +85°C non-condensing 20% to 90% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 0/2021 PA-5