R0.25S12-1515/HP-R

Features Unregulated Converters • Fully RoHS 10/10 conform • Full power at 100°C ambient temperature • 1kVDC or 3kVDC isolation option • Suitable for fully automated assembly (including vapor phase soldering) • Optional continuous short circuit protection Description R0.25S -xx09 3.3, 5, 12, 15, 24 9 28 470 R0.25S (3)-xx12 (4,5) 3.3, 5, 12, 15, 24 12 21 150 R0.25S -xx15 3.3, 5, 12, 15, 24 15 17 68 R0.25S (3)-xx24 (4,5) 3.3, 5, 12, 15, 24 24 10.4 68 (4,5) 3.3, 5, 12, 15, 24 ±3.3 ±38 470 R0.25D (3)-xx05 (4,5) 3.3, 5, 12, 15, 24 ±5 ±25 220 R0.25D -xx09 (4,5) R0.25D -xx15 3.3, 5, 12, 15, 24 ±15 ±8.3 68 R0.25D -xx24 (4,5) (3) ±5.2 33 3.3, 5, 12, 15, 24 5/5 25/25 220/220 3.3, 5, 12, 15, 24 12/12 10/10 68/68 R0.25DA -xx0505 R0.25DA -xx1212 (4,5) (3) Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1s without damage to the converter Model Numbering R0.25S_- __ __ /_ _ Single, Dual or Independent DA “Pinning (3)” nom. Input Voltage M CONVER T 10 from 10 C O M CONVER T REACH compliant M compliant PL U D IA N T PRO CO ±24 O RoHS 2 + CO 3.3, 5, 12, 15, 24 (4,5) (3) C S 68 (4,5) (3) R 68 ±10.4 E ±14 ±12 S ±9 3.3, 5, 12, 15, 24 R 3.3, 5, 12, 15, 24 E R0.25D (3)-xx12 (4,5) (4,5) M TS 470 (4,5) C 1000 50 RE 76 5 TS 3.3 3.3, 5, 12, 15, 24 C 3.3, 5, 12, 15, 24 R0.25S (3)-xx05 (4,5) (3) y nom. Input Output Output max. Capacitive Voltage Voltage Current Load(2) [VDC] [VDC] [mA] [µF] R0.25S (3)-xx3.3 (4,5) R0.25D -xx3.3 arrant RE Part Number (3) 0.25 Watt 3 SMD Single, Dual and Independent Outputs w Selection Guide (3) R0.25S & R0.25D(A) YEA R The R0.25S and R0.25D converters are of the enclosed open frame type, i.e. they are not potted. The converters are typically used in general purpose and industrial low ower isolation and voltage matching applications where an SMD converter is required. The converter series feature an extended ambient temperature operating range of -40°C to +100°C without derating and optional continuous short circuit protection. In addition to single, dual and independent outputs, two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines. (3) DC/DC Converter PL U D IA N T PRO E358085 UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified IEC/EN60950-1 certified EN55032 compliant CB report “Packaging (5)” “Protection and Isolation Option (4)” Output Voltage Notes: Note3: R0.25S: without marking denotes 5 pins out of 8 fitted (includes /H option) with marking “8” denotes 8 pins out of 8 fitted (/H option not available) with marking “12” denotes 10 pins out of 12 fitted (includes /H option) R0.25D: without marking denotes “6” pins out of 10 fitted (includes /H option) R0.25D(A): with marking “10” denotes 10(7) pins out of 10 fitted (/H option not available) R0.25D: with marking “12” denotes 10 pins out of 12 fitted (includes /H option) Note4: standard part is without continuous short circuit protection add suffix „/P“ for continuous short circuit protection add suffix „/H“ for 3kVDC isolation (not available for R0.25S8, R0.25D10 and R0.25DA10) or add suffix „/HP“ for 3kVDC isolation and continuous short circuit protection Note5: add suffix „-R“ for tape and reel packaging (compatible with all other suffixes) www.recom-power.com REV.: 1/2019 ECO-1 R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% Efficiency 60% Minimum Load 0% 70% 20kHz Internal Operating Frequency Output Ripple and Noise 50kHz 90kHz 20MHz BW 100mVp-p Efficiency vs. Load R0.25D-xx05 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] R0.25S-xx05 60 50 40 30 50 40 30 20 20 3.305 0505 1205 10 0 60 0 10 20 30 40 50 60 70 80 90 3.305 0505 1205 10 0 100 0 10 20 Output Load [%] 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy ±5.0% typ. / ±7.0% max. Line Regulation low line to high line, full load 10% to 100% load Load Regulation (6) 2.0% max. 15.0% typ. / 20.0% max. 12.0% typ. / 15.0% max. 7.0% typ. / 10.0% max. 6.0% typ. / 10.0% max. 3.3Vout 5, 5/5Vout 9Vout 12, 12/12, 15, 24Vout Notes: Note6: Operation below 10% load will not harm the converter, but specifications may not be met Tolerance Envelope Output Voltage [%] +10% +5% Typical L o +5% ad Line Vnom -1% -5% 10 50 100 Output Load [%] continued on next page www.recom-power.com REV.: 1/2019 ECO-2 R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Deviation vs. Load R0.25S-xx05 R0.25D-xx05 25 25 3.305 0505 1205 20 15 Deviation [%] Deviation [%] 15 10 5 10 5 0 0 -5 -5 -10 3.305 0505 1205 20 0 10 20 30 40 50 60 70 80 90 -10 100 0 10 20 30 Output Load [%] 40 50 60 70 80 90 100 Output Load [%] PROTECTIONS Parameter Type Short Circuit Protection (SCP) Isolation Voltage(7) without suffix with suffix “/P” below 100mΩ 1 second continuous without suffix tested for 1 second rated for 1 minute 1kVDC 500VAC/60Hz with suffix “/H” tested for 1 second rated for 1 minute 3kVDC 1.5kVAC/60Hz tested for 1 second 1kVDC 10GΩ min. I/P to O/P 0/P to O/P Isolation Resistance Value R0.25DA Viso=500V Isolation Capacitance 75pF max. functional Insulation Grade Notes: Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note8: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Operating Temperature Range Condition Value full load @ free air convection, refer to “Derating Graph” Operating Altitude Operating Humidity -40°C to +100°C 2000m non-condensing 95% RH max. Pollution Degree MTBF PD2 according to MIL-HDBK-217F, G.B. +25°C +85°C 4423 x 10 hours 2161 x 103 hours 3 continued on next page www.recom-power.com REV.: 1/2019 ECO-3 R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Derating Graph (@ Chamber and free air convection) Big Case (with marking 12) 100 100 90 90 80 80 70 70 Output Load [%] Output Load [%] Standard Case 60 50 40 60 50 40 30 30 20 20 10 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 115 Ambient Temperature [°C] Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety E358085-A2-UL UL60950-1, 2nd Edition:2007 CAN/CSA C22.2 No. 60950-1-07, 2nd Edition:2007 Information Technology Equipment, General Requirements for Safety LVD1605077-08 IEC60950-1:2005, 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 Information Technology Equipment, General Requirements for Safety (CB Scheme) E322406-A2-CB-1 Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance WD-SE-R-180674-A0 EAC IEC60950-1:2001, 1st Edition IEC60601-1:2005 + A1:2012, 3rd Edition EN60601-1:2006 + A12:2014 RU-AT.49.09571 TP TC 004/2011 RoHS2 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Electromagnetic compatibility of multimedia equipment Emission requirements Standard / Criterion with external filter (see filter suggestion below) EMC Filtering Suggestions according to EN55032 Class B Single Output EN55032, Class B Dual Output C2 +VIN C2 L1 FUSE +VOUT +VIN L1 FUSE +VOUT C1 C1 -VIN -VOUT Com -VIN -VOUT Component List Class B nom. Vin 3.3VDC 5VDC www.recom-power.com C1 C2 3.3µH SMD Inductor 2.2µF MLCC 12, 15VDC 1.0µF MLCC 24VDC 470nF MLCC L1 470pF/4kVDC REV.: 1/2019 4.7µH SMD Inductor 2.2µH SMD Inductor 47µH SMD Inductor ECO-4 R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) EMC Filtering Suggestions according to EN55032 Class B Dual Independent Output L1 FUSE +VIN C2 +1VOUT -1VOUT C1 +2VOUT -VIN -2VOUT C3 Component List Class B nom. Vin C1 3.3VDC C2 C3 3.3µH SMD Inductor 2.2µF MLCC 5VDC 12, 15VDC 1.0µF MLCC 24VDC 470nF MLCC L1 470pF/2kVDC 470pF/2kVDC 4.7µH SMD Inductor 2.2µH SMD Inductor 47µH SMD Inductor DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Material Type Value case non-conductive black plastic, (UL94 V-0) R0.25S, R0.25S8 R0.25S12, R0.25D, R0.25D10, R0.25D12 R0.25S R0.25S8 R0.25S12, R0.25D, R0.25D(A)10, R0.25D(A)12 Dimension (LxWxH) Weight 12.75 x 10.7 x 6.7mm 15.25 x 10.7 x 6.7mm 1.0g typ. 1.1g typ. 1.2g typ. Dimension Drawing (mm) 5 Pin Single SMD Package /H option is available in this pin package Pinning Information embossed logo Pin # 7.0 10.7 0.25 6.7 12.75 3x2.54=7.62 0.50 Recommended Footprint Details 8 5 8 +Vin 4 -Vout 5 +Vout 8 NC NC = No Connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 5 Top View 1 2 -Vin 2 4 1.80 4 12.00 1 2 Bottom View 2.54 8.50 11.10 Single 1 1.20 continued on next page www.recom-power.com REV.: 1/2019 ECO-5 R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) 6 Pin Dual SMD Package /H option is available in this pin package embossed logo Pinning Information 0.25 6.7 7.0 10.7 15.24 4x2.54=10.16 8.50 11.10 0.50 Recommended Footprint Details Bottom View 10 7 2.54 10 7 Top View 1 2 4 5 Dual 1 -Vin 2 +Vin 4 Com 5 -Vout 7 +Vout 10 NC NC = No Connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 1.80 4 5 12.00 1 2 Pin # 1.20 8 Pin Single SMD Package /H option is not available in this pin package Pinning Information embossed logo 10.7 0.25 6.7 12.75 7.0 Pin # 3x2.54=7.62 0.50 Recommended Footprint Details 8 7 6 5 Top View 1 2 3 4 -Vin 2 +Vin 3 NC 4 -Vout 5 +Vout 6 NC 7 NC 8 NC NC = No Connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 1.80 Bottom View 8 7 6 5 12.00 1 2 3 4 2.54 8.50 11.10 Single 1 1.20 continued on next page www.recom-power.com REV.: 1/2019 ECO-6 R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) 10 Pin Dual SMD Package /H option is not available in this pin package Pinning Information embossed logo 0.25 6.7 7.0 10.7 15.24 4x2.54=10.16 0.50 8.50 11.10 Bottom View 10 9 8 7 6 2.54 10 9 8 7 6 Top View 1.80 1 2 3 4 5 12.00 Recommended Footprint Details 1 2 3 4 5 Independent Pin # Dual 1 -Vin -Vin 2 +Vin +Vin 3 NC no pin 4 Com -Vout1 5 -Vout +Vout1 6 NC -Vout2 7 +Vout +Vout2 8 NC no pin 9 NC no pin 10 NC NC NC = No Connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 1.20 12 Pin Single and Dual SMD Package /H option is available in this pin package embossed logo Pinning Information 0.25 6.7 7.0 10.7 15.24 5x2.54=12.7 0.50 12 11 10 www.recom-power.com 8 7 12 11 10 8 7 Top View 1 2 3 1.20 REV.: 1/2019 5 6 Single Dual 1 -Vin -Vin +Vin 2 +Vin 3 NC NC 5 -Vout Com -Vout 6 NC 7 NC NC 8 +Vout +Vout 10 NC NC 11 NC NC 12 NC NC NC = No Connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 1.80 5 6 Bottom View 12.00 Recommended Footprint Details 1 2 3 1.27 8.50 11.10 Pin # >3.8 ECO-7 R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PACKAGING INFORMATION tube tape and reel (carton) Packaging Dimension (LxWxH) Packaging Quantity tube R0.25S, R0.25S8 R0.25S12, R0.25D, R0.25D(A)10, R0.25D(A)12 tape and reel Tape Width 40pcs 33pcs 500pcs 24.0mm Storage Temperature Range Storage Humidity 530.0 x 17.0 x 14.0mm 355.0 x 342.0 x 36.0mm -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2019 ECO-8