R12005

EUROLINE - DC/DC-Converter RxxN and RxxO Series, 1 Watt, DIP8/SIP4, 1kVDC Isolation (Single Output) Features ● Wide Temperature Performance at full 1 Watt Load, –40°C to +85°C ● 1kVDC Isolation ● Industry Standard Pinout ● Efficiency to 80% ● ● ● ● UL 94V-O Package Material Internal SMD Construction Toroidal Magnetics MTTF up to 2.9 Million Hours Selection Guide 5V and 12V input types Part Number Voltage R05N05 R05N09 R05N12 R05N15 R05O05 R05O09 R05O12 R05O15 R12N05 R12N09 R12N12 R12N15 R12O05 R12O09 R12O12 R12O15 Nom. Input Voltage (VDC) 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 Rated Output Voltage (VDC) 5 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 Rated Output Current (mA) 200 111 83 66 200 111 83 66 200 111 83 66 200 111 83 66 Input Current at Rated Load (mA) 289 260 256 250 289 260 256 250 120 113 110 111 120 113 110 111 Efficiency (%) 69 77 78 80 69 77 78 80 69 74 76 75 69 74 76 75 Isolation Capacitance (pF) 30 37 33 40 30 37 33 40 33 48 55 52 33 48 55 52 SIP4 DIP8 SIP4 DIP8 Package Style Absolute Maximum Ratings Input Voltage VIN 5V types Input Voltage VIN 12V types Short Circuit Duration 1) Internal Power Dissipation Lead Temperature (1.5 mm from case for 10 seconds) 1). 7V 15V 1s 450mW 300 °C Supply voltage must be discontinued at the end of the short circuit duration. www.recom-international.com EU 5 EUROLINE - DC/DC-Converter RxxN and RxxO Series, 1 Watt, DIP8/SIP4, 1kVDC Isolation (Single Output) Electrical Specifications (measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified) Input Voltage Range VIN (continuous operation) Reflected Ripple Current (depending on the type) Voltage Set Point Accuracy Line Regulation Load Voltage Regulation (10% load to 100% full load) 5V output types 9V output types 12V output types 15V output types 5V input types 12V input types 4.5VDC min./ 5.5VDC max. 10.8VDC min./ 13.2VDC max. 26 mA p-p min. to 48 mA p-p max. See Tolerance Envelope 1.0% / 1.2% of VIN 14% min. / 15% max. 9% min. / 10% max. 7.5% min. / 9.5% max. 7% min. / 8.5% max. 40mVp-p min. / 110mVp-p max. 1000VDC min. 1000 Vpk min. 10 GΩ typ. VIN 5V input types VIN 12V input types SIP types DIP types 110kHz typ. 145kHz typ. 1.30 g 1.48 g –40°C min. to +85°C max. (see graph) –50°C min. +130°C max. 5V output types all other output types –40°C +25°C +85°C +41°C max. +32°C max. 302kHrs min. / 2938kHrs max. 252kHrs min. / 2414kHrs max. 212kHrs min. / 1961kHrs max. Ripple & Noise (20MHz band limited), (depending on the type) Isolation Voltage (flash tested for 1 second) Test Voltage (50Hz, 10 seconds) Resistance (Viso = 500V) Switching Frequency at Full Load Package Weight Operating Temperature Range (all output types) Storage Temperature Range Case Temperature Above Ambient (depending on the type) MTTF 1) (depending on the type) 1). Calculated using MIL-HDBK-217F with nominal input voltage at full load. Please contact us, if you need exact parameters for the converter you have selected. Typical Characteristics, Tolerance Envelope and Temperature Derating Graph R05N/Oxx 100 0515 Deviation from Nominal (%) 80 60 0505 0509, 0512 +10 0 –5 –10 0 20 40 60 80 100 0512 Output Voltage +15 0505 0515 Tolerance Envelope +10% +5% V Nom. Typical Lo ad Line +2,5% – 2,5% – 7,5% Efficiency (%) 40 20 0 20 40 60 80 100 10% 50% 100% Total Output Current (%) Total Output Current (%) Output Load Current (%) R12N/Oxx 100 Deviation from Nominal (%) 80 60 1212 1209, 1215 1205 +12 Temperature Derating Graph 2.0 Output Power (Watts) 1.5 1.0 0.5 0 -40 Safe Operating Area +8 +4 0 –4 –8 0 20 40 60 Total Output Current (%) 1209 1205 80 100 1212 1215 Efficiency (%) 40 20 0 20 40 60 80 100 0 50 100 85 120 150 Total Output Current (%) Ambient Temperature ˚C EU 6 www.recom-international.com EUROLINE - DC/DC-Converter RxxN and RxxO Series, 1 Watt, SIP4/DIP8, 1kVDC Isolation (Single Output) Package Style and Pinning (mm) 8 Pin DIP Package Style 4 Pin SIP Package Style 0V 7 +V 5 4 Pin SIP (Top View) 1 GND 4 VIN 1234 GND VIN OV +V 12.60 6.00 11.50 10.10 7.80 10.00 0.51 typ. 4.1 0.51 typ. 4.1 0.51 typ. 1.94 7.62 1.09 0.25±0.05 1.25 typ. 1.94 7.62 7.62 typ. 0.25±0.05 Recommended Footprint Details 1.00ø+0.15/–0 2.54 1.00ø+0.15/–0 2.54 2.54 2.54 XX.X ± 0.5 mm XX.XX ± 0.25 mm www.recom-international.com EU 7