R12I15

EUROLINE - DC/DC-Converter RxxIxx-Series, 2 Watt, SIP4, Isolated (Single Output) Features ● Wide Temperature performance at full 2 Watt load, –40°C to 85°C ● Industry Standard Pinout ● 1kVDC Isolation ● ● ● ● Efficiency to 85% UL 94V-0 Package Material Internal SMD Construction MTTF up to 2.9 Million Hours Selection Guide 5V, 12V Input Types Part Number Nom. Input Voltage (VDC) 5 5 5 5 12 12 12 12 Rated Output Voltage (VDC) 5 9 12 15 5 9 12 15 Rated Output Current (mA) 400 222 167 133 400 222 167 133 Input Current at Rated Load (mA) 513 492 479 481 207 198 197 197 Efficiency (%) 78 81 84 83 81 84 85 85 Isolation Capacitance (pF) 19 27 32 27 28 42 46 54 SIP4 Package Style R05I05 R05I09 R05I12 R05I15 R12I05 R12I09 R12I12 R12I15 Absolute Maximum Ratings Input Voltage VIN Internal Power Dissipation Lead Temperature 05V types 12V types 7VDC 15VDC 805mW 300°C Electrical Specifications (measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified) Input Voltage Range VIN (continuous operation) Reflected Ripple Current (depending on the type) Voltage Set Point Accuracy Line Regulation (high VIN to low VIN) Load regulation (depending on the type) Ripple and Noise (BW=DC to 20MHz) (depending on the type) Isolation Voltage (flash tested for 1 second) Test Voltage (50Hz, 10 seconds) Resistance (Viso = 500V) Switching Frequency Package Weight Storage Temperature Range Operating Temperature Range (all output types) Case Temperature Above Ambient (depending on the type) MTTF 1) (depending on the type) –40°C +25°C +85°C SIP types 5V types 12V types 4.5VDC min. / 5.5VDC max. 10.8VDC min. / 13.2VDC max. 23 mA p-p min. to 38 mA p-p max. see Tolerance Envelope 1.0% min. / 1.2% max. of VIN 3.7% min. / 8.5% max. 45mVp-p min. / 200mVp-p max. 1000VDC min. 1000 Vpk min. 10 GΩ min. 90kHz typ. 2.0 g –50°C to +130°C –40°C min. to +85°C max. (see graph) +36°C min. / +45°C max. 417kHrs min. / 3970kHrs max. 328kHrs min. / 2327kHrs max. 222kHrs min. / 934kHrs max. 1). Calculated using MIL-HDBK-217F with nominal input voltage at full load. Please contact us, if you need exact parameters for the converter you have selected. www.recom-international.com EU 31 EUROLINE - DC/DC-Converter RxxIxx-Series, 2 Watt, SIP4, Isolated (Single Output) Typical Characteristics, Tolerance Envelope and Derating Graph R05Ixx 100 80 60 Deviation from Nominal (%) 0512 0505 0509 0515 7 5 3 1 -1 -3 -5 0 20 40 60 80 100 Total Output Current (%) 0509 0515 0505 0512 Tolerance Envelope +10% +5% V Nom. +2,5% - 2,5% - 7,5% Efficiency (%) 20 0 20 40 60 80 100 Output Voltage 40 Total Output Current (%) 10% 50% 100% Output Load Current (%) R12Ixx 100 80 1205 60 Deviation from Nominal (%) 1209, 1212, 1215 7 5 1205 3 1 -1 -3 -5 0 20 40 60 80 100 Total Output Current (%) 1209 1212 1215 Temper. Derating Graph 4.0 Output Power (Watts) 3.0 2.0 1.0 0 -40 Safe Operating Area Efficiency (%) 40 20 0 20 40 60 80 100 0 50 100 150 85 125 Ambient Temperature ˚C Total Output Current (%) Package Style and Pinning (mm) 4 Pin SIP Package Style 1 23 4 GND VIN 0V +V 0.25±0.05 3.38±0.50 1234 7.62 1.25 typ. Recommended Footprint Details 11.50 2.54 7.55 1.0ø+0.15/–0 2.54 10.20 4.1 min. 0.50±0.05 RxxIxx RECOM **** 0.50±0.05 EU 32 www.recom-international.com