R12SDH15

EUROLINE - DC/DC-Converter RxxSDHxx Series, 1 Watt, SMD, 3kVDC Isolation (Dual Output) Features ● Wide Temperature Performance at full 1 Watt Load, –40°C to +85°C ● 3kVDC Isolation ● Efficiency to 82% Selection Guide 5V and 12V input types Part Number Voltage R05SDH05 R05SDH09 R05SDH12 R05SDH15 R12SDH05 R12SDH09 R12SDH12 R12SDH15 Nom. Input Voltage (VDC) 5 5 5 5 12 12 12 12 ● ● ● ● UL 94V-O Package Material Internal SMD Construction MTTF up to 2.1 Million Hours Multi Layer Ceramic Capacitors Rated Output Voltage (VDC) ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 Rated Output Current (mA) ±100 ±55 ±42 ±33 ±100 ±55 ±42 ±33 Input Current at Rated Load (mA) 282 260 253 250 114 105 104 101 Efficiency (%) 71 77 79 80 73 79 80 82 Isolation Capacitance (pF) 33 38 44 43 50 72 89 100 Package Style SMD 22Pin Absolute Maximum Ratings Input Voltage VIN Short Circuit Duration 1) Internal Power Dissipation Lead Temperature (1.5 mm from case for 10 seconds) 1). 5V types 12V types 7V 15V 1s 550mW 300 °C Supply voltage must be discontinued at the end of the short circuit duration. Electrical Specifications (measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified) Input Voltage Range VIN (continuous operation) Reflected Ripple Current (depending on the type) Voltage Set Point Accuracy (depending on the type) Line Regulation (depending on the type) Load Voltage Regulation (10% load to rated load) (12V input types have typically 3% less load regulation change) 5V output types 9V output types 12V output types 15V output types 5V input types 12V input types 4.5VDC min. / 5.5VDC max. 10.8VDC min. / 13.2VDC max. 41 mA p-p min. to 47 mA p-p max. See Tolerance Envelope 1.0% / 1.2% of VIN 10% min. / 12% max. 6.5% min. / 8.0% max. 6.0% min. / 8.5% max. 6.0% min. / 7.0% max. 40mVp-p min. / 75mVp-p max. 3000VDC min. 3000 Vpk min. 10 GΩ min. VIN all types 115kHz nom. 1.53 g –40°C min. to +85°C max. (see graph) –55°C min. +125°C max. 5V output types all other types –40°C +25°C +85°C +46°C nom. +35°C nom. 184kHrs min. / 2068kHrs max. 154kHrs min. / 1697kHrs max. 129kHrs min. / 1368kHrs max. Ripple & Noise (20MHz band limited), (depending on the type) Isolation Voltage (for 1 minute) Test Voltage (50Hz, 10 seconds) Resistance (Viso = 1000V) Switching Frequency at Full Load (depending on the type) Package Weight Operating Temperature Range (all output types) Storage Temperature Range Case Temperature above Ambient MTTF 2) (depending on the type) 2). Calculated using MIL-HDBK-217F with nominal input voltage at full load. Please contact us, if you need exact parameters for the converter you have selected.. EU 20 www.recom-international.com EUROLINE - DC/DC-Converter RxxSDHxx Series, 1 Watt, SMD, 3kVDC Isolation (Dual Output) Typical Characteristics, Tolerance Envelope and Temperature Derating Graph R05SDHxx 80 0512, 0515 Deviation from Nominal (%) 60 0505 40 0509 +25 +20 +15 +10 0509 0 –5 –10 0 20 40 0505 60 80 100 0512 Output Voltage +5 0515 Tolerance Envelope +10% +5% V Nom. Typical Lo ad Line +2,5% – 2,5% – 7,5% Efficiency (%) 20 0 20 40 60 80 100 10% 50% 100% Total Output Current (%) Total Output Current (%) Output Load Current (%) R12SDHxx 80 60 40 1212, 1215 1209 1205 Deviation from Nominal (%) +25 +20 +15 +10 +5 0 –5 –10 0 20 40 60 80 100 Total Output Current (%) 1215 1212 1209 1205 Temperature Derating Graph 2.0 Output Power (Watts) 1.5 1.0 0.5 0 -40 Safe Operating Area Efficiency (%) 20 0 50 100 85 150 0 20 40 60 80 100 Total Output Current (%) Ambient Temperature ˚C Package Style and Pinning (mm) 10 Pin SMD Package Style NC 10 12 GND VCC +V 7 Recommended Footprint Details 1.20 Top View 45 0V –V 10.30 1.80 10.16 15.24 7.62 Detail A 11.30 8.20 RxxSDHxx RECOM **** Reference Plane 0.55 1.00 0.50 ±5° 2.54 15.24 14.70 5.40 1.65 10.16 0.20 1.55 8.20 7.90 Detail A 7.40 0.25 ±0.05 XX.X ± 0.5 mm XX.XX ± 0.25 mm www.recom-international.com EU 21