R1S-2405/EHP

Features Unregulated Converters • • • • • • 1:1 input range Efficiency up to 82% 1kVDC/1s or 2kVDC/1s isolation option Wide operating temperature range from -40°C to +100°C at full load UL60950-1 and IEC/EN60950-1 certified 1W SMD package Description The R1S/E series is an unregulated DC/DC converter in fully encapsulated open Frame package style. This series has been designed to offer exceptionally high efficiency at low loads and an extended operating temperature range. Uses include battery powered supplies, green energy applications and general isolating/converting DC power where board space and high efficiency is a premium. DC/DC Converter R1S/E 1 Watt SMD Single Output Selection Guide Part Number nom. Input Output Output Efficiency max. Capacitive Voltage Voltage Current typ.(1) Load(2) [VDC] [VDC] [mA] [%] [µF] R1S (3)-3.305/E (4,5) 3.3 5 200 81 2200 R1S (3)-0505/E (4,5) 5 5 200 81 2200 R1S -1205/E 12 5 200 82 2200 R1S (3)-2405/E (4,5) 24 5 200 80 2200 (3) (4,5) Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1s without damage to the converter E358085 Model Numbering R1S_- __ __ /E_ _ Single “Pinning (3)” nom. Input Voltage “Packaging (5)” UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified IEC/EN60950-1 certified EN55032 compliant “Protection and Isolation Option (4)” Output Voltage Notes: Note3: without marking denotes 5 pins out of 8 fitted (includes /H option) with marking “8” denotes 8 pins out of 8 fitted (/H option not available) Note4: standard part is without continuous short circuit protection add suffix „/P“ for continuous short circuit protection add suffix „/H“ for 2kVDC/1s isolation (not available for R1S8) or add suffix „/HP“ for 2kVDC/1s isolation and continuous short circuit protection Note5: add suffix „-R“ for tape and reel packaging (compatible with all other suffixes) Ordering Examples: R1S8-3.305/E = Single Output, 8 pins out of 8 fitted, 3.3Vin, 5Vout R1S-3.305/EH = Single Output, 5 pins out of 8 fitted, 3.3Vin, 5Vout with 2kVDC/1s isolation R1S8-0505/EP = Single Output, 8 pins out of 8 fitted, 5Vin, 5Vout with continuous short circuit protection R1S-0505/EHP-R = Single Output, 8 pins out of 8 fitted, 5Vin, 5Vout with 2kVDC/1s isolation, continuous short circuit protection and tape and reel packaging www.recom-power.com REV.: 3/2019 ECO-1 R1S/E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% 0% Minimum Load (5) 20kHz Internal Operating Frequency Output Ripple and Noise 90kHz 20MHz BW Efficiency vs. Load 50mVp-p 100mVp-p R1S-xx05/E 100 90 Efficiency [%] 80 70 60 50 40 30 3.305 0505 1205 2405 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy ±5.0% max. Line Regulation low line to high line, full load ±1.2% typ. Load Regulation 10% to 100% load 15.0% max. Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met Tolerance Envelope Output Voltage [%] +10% +5% Typical L +5% oad Lin Vnom e -2% -5% 10 50 100 Output Load [%] continued on next page www.recom-power.com REV.: 3/2019 ECO-2 R1S/E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Deviation vs. Load R1S-xx05/E 25 3.305 0505 1205 2405 20 Deviation [%] 15 10 5 0 -5 -10 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] PROTECTIONS Parameter Type Short Circuit Protection (SCP) Isolation Voltage(7) Value without suffix with suffix “/P” below 100mΩ 1 second continuous without suffix tested for 1 second rated for 1 minute 1kVDC 500VAC/60Hz with suffix “/H” tested for 1 second rated for 1 minute 2kVDC 1kVAC/60Hz 10GΩ min. I/P to O/P Isolation Resistance Isolation Capacitance Insulation Grade 75pF max. functional Notes: Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note8: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Operating Temperature Range Condition Value full load @ free air convection, refer to “Derating Graph” Operating Altitude Operating Humidity -40°C to +100°C 2000m non-condensing 95% RH max. Pollution Degree MTBF PD2 according to MIL-HDBK-217F, G.B. +25°C +100°C 3459 x 10 hours 756 x 103 hours 3 continued on next page www.recom-power.com REV.: 3/2019 ECO-3 R1S/E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Derating Graph (@ Chamber and free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety E358085-A2-UL Information Technology Equipment, General Requirements for Safety LVD1605077-08 Medical electrical equipment Part 1: General requirements for basic safety and essential performance EAC WD-SE-R-180674-A0 RU-AT.49.09571 RoHS2 Standard UL60950-1, 2nd Edition:2007 CAN/CSA C22.2 No. 60950-1-07, 2nd Edition:2007 IEC60950-1:2005, 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 EN60601-1:2006 + A12:2014 IEC60601-1:2005 + A1:2012, 3rd Edition TP TC 004/2011 RoHS-2011/65/EU + AM-2015/863 DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case non-conductive black plastic, (UL94 V-0) Dimension (LxWxH) 12.75 x 10.7 x 6.7mm Weight 1.0g typ. continued on next page www.recom-power.com REV.: 3/2019 ECO-4 R1S/E DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) 5 Pin Single SMD Package /H option is available in these pin package embossed logo Pinning Information 7.0 10.7 0.25 6.7 12.75 3x2.54=7.62 0.50 Recommended Footprint Details 8 8 5 2.54 Single 1 -Vin 2 +Vin 4 -Vout 5 +Vout 8 NC NC = No Connection Tolerance: xx.xx= ±0.25mm 5 Top View 1 2 4 1.80 4 12.00 1 2 Bottom View 8 Pin Single SMD Package 8.50 11.10 Pin # 1.20 /H option is not available in these pin package embossed logo Pinning Information 10.7 0.25 6.7 12.75 7.0 Pin # 3x2.54=7.62 0.50 Recommended Footprint Details 8 7 6 5 Top View 1 2 3 4 1.80 Bottom View 8 7 6 5 12.00 1 2 3 4 2.54 8.50 11.10 Single 1 -Vin 2 +Vin 3 NC 4 -Vout 5 +Vout 6 NC 7 NC 8 NC NC = No Connection Tolerance: xx.xx= ±0.25mm 1.20 PACKAGING INFORMATION Packaging Dimension (LxWxH) Packaging Quantity tube tape and reel (carton) tube tape and reel Tape Width 40pcs 500pcs 24.0mm Storage Temperature Range Storage Humidity 530.0 x 17.0 x 14.0mm 355.0 x 342.0 x 36.0mm -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 3/2019 ECO-5