R1SE-0505

• • • • • • Features Unregulated Converters 1:1 input range SMD package Efficiency up to 75% 1kVDC/1s isolation Wide operating temperature range from -40°C to +85°C at full load UL/EAC certified Description DC/DC Converter R1SE 1 Watt 3 SMD Single Output YEA R y arrant w The R1SE series are 1W unregulated DC/DC converters that are lower cost than equivalent converters. The benefits of high volume production and semi-automatic assembly allow for a lower selling price without sacrificing our high quality standards. They are UL certified for safety, offer reasonable efficiency and operating temperature range of -40° to +85°C. Selection Guide Part Number nom. Input Output Output Efficiency max. Capacitive Voltage Voltage Current typ. (1) Load (2) [VDC] [VDC] [mA] [%] [µF] R1SE (3)-0505 (4) 5 5 200 75 1000 T CONVER T S C M TS TS compliant PL U D IA N T PRO CO CO 10 from 10 M REACH compliant M O R S RoHS 2 + C C CONVER RE M E O R C E RE Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1s without damage to the converter PL U D IA N T PRO E358085 Model Numbering R1SE_- __ __ _ Single Pinning (3) Packaging (4) Output Voltage UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified Input Voltage Notes: Note3: without marking denotes 5 pins out of 8 fitted with marking “8” denotes 8 pins out of 8 fitted Note4: add suffix „-R“ for tape and reel packaging Ordering Examples: R1SE-0505 = Single Output, 5 pins out of 8 fitted, 5Vin, 5Vout R1SE-0505-R = Single Output, 5 pins out of 8 fitted, 5Vin, 5Vout Output and tape and reel packaging R1SE8-0505 = Single Output, 8 pins out of 8 fitted, 5Vin, 5Vout www.recom-power.com REV.: 3/2020 ECO-1 R1SE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% 20kHz Internal Operating Frequency Output Ripple and Noise 70kHz 20MHz BW 68mVp-p 100mVp-p Efficiency vs. Load 100 90 Efficiency [%] 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy -2.0% typ. / ±5.0% max. Line Regulation low line to high line, full load ±1.2% typ. 10% to 100% load Load Regulation (5) 10.0% typ. / 15.0% max. Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met Tolerance Envelope Output Voltage [%] +10% +5% Typical L +5% oad Lin Vnom e -2% -5% 10 50 100 Output Load [%] continued on next page www.recom-power.com REV.: 3/2020 ECO-2 R1SE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Deviation vs. Load 25 20 Deviation [%] 15 10 5 0 -5 -10 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] PROTECTIONS Parameter Type Short Circuit Protection (SCP) Isolation Voltage (6) Isolation Resistance Value below 100mΩ 1 second tested for 1 second rated for 1 minute I/P to O/P Viso = 500V Isolation Capacitance Insulation Grade 1kVDC 500VAC/60Hz 10GΩ min. 75pF max. functional Notes: Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note7: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Operating Temperature Range Condition Value full load @ free air convection -40°C to +85°C Operating Altitude Operating Humidity 2000m non-condensing 95% RH max. Pollution Degree MTBF PD2 according to MIL-HDBK-217F, G.B. +25°C +85°C 1022 x 10 hours 172 x 103 hours 3 continued on next page www.recom-power.com REV.: 3/2020 ECO-3 R1SE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Derating Graph (@ free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 85 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety E358085-A2-UL UL60950-1, 2nd Edition:2007 CAN/CSA C22.2 No. 60950-1-03, 2nd Edition:2007 EAC RU-AT.49.09571 TP TC 004/2011 RoHS 2+ RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Electromagnetic compatibility of multimedia equipment Emission requirements Standard / Criterion with external filter (see filter suggestion below) EN55032, Class B EN55032, Class A EMC Filter Suggestion according to EN55032 C3 L1 +Vin C1 +Vin +Vout -Vin -Vout +Vout C2 -Vin -Vout C4 Component List Class A Component List Class B MODEL C1 L1 C2 C3 and C4 R1SE-0505 N/A N/A 6.8µF 50V MLCC N/A MODEL R1SE-0505 C1 L1 10µF 12µH choke 100V MLCC RLS-126 C3 (safety) C4 (safety) 330pF 330pF Notes: Note8: Filter suggestions are valid for indicated part numbers only. For other part numbers, please contact RECOM tech support for advice www.recom-power.com REV.: 3/2020 ECO-4 R1SE DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case non-conductive black plastic, (UL94 V-0) Dimension (LxWxH) 12.75 x 10.7 x 6.7mm Weight 1.0g typ. Dimension Drawing (mm) 5 Pin Single SMD Package 8 Pin Single SMD Package embossed logo 12.75 7.0 10.7 0.25 7.0 0.50 3x2.54=7.62 8.50 11.10 0.50 Recommended Footprint Details 5 2.54 Top View 1 2 4 Recommended Footprint Details 1 2 3 4 5 Bottom View 1.80 Bottom View 8 8 12.00 4 1 2 8.50 11.10 8 7 6 5 2.54 1.20 Pinning Information 8 7 6 5 12.00 3x2.54=7.62 Top View 1 2 3 4 1.80 10.7 0.25 6.7 12.75 6.7 embossed logo 1.20 Pinning Information Pin # Single Pin # 1 -Vin 1 -Vin 2 +Vin 2 +Vin 4 -Vout 4 -Vout 5 +Vout 5 +Vout 8 NC 3,6,7,8 NC NC = No Connection Tolerance: xx.xx= 0.25mm Single NC = No Connection Tolerance: xx.xx= 0.25mm PACKAGING INFORMATION Packaging Dimension (LxWxH) Packaging Quantity tube tape and reel (carton) tube tape and reel Tape Width 40pcs 500pcs 24.0mm Storage Temperature Range Storage Humidity 530.0 x 17.0 x 14.0mm 355.0 x 342.0 x 36.0mm -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 3/2020 ECO-5