R1SE-1505/H2-R

Features Unregulated Converters • • • • • • SMD case style Tape and reel packaging UL60950-1 certified High operating temperature range from -40°C to +100°C at full load Efficiency up to 76% 2kVDC/1s isolation Description The R1SE/H2 series are 1W unregulated DC/DC converters that are lower cost than equivalent converters. The benefits of high volume production and semi-automatic assembly allow for a lower selling price without sacrificing our high quality standards. They are UL certified for safety, offer reasonable efficiency and still meet the full industrial operating temperature range of -40° to +100°C. All converters are 100% tested in production and carry our 3-year warranty. DC/DC Converter R1SE/H2 1 Watt SMD Single Output Selection Guide Part Number Input Output Output Efficiency max. Capacitive Voltage Voltage Current typ. (1) Load (2) [VDC] [VDC] [mA] [%] [µF] R1SE-3.305/H2-R 3.3 5 200 75 1000 R1SE-0505/H2-R 5 5 200 75 1000 R1SE-0512/H2-R 5 12 84 76 330 R1SE-0515/H2-R 5 15 66 76 220 R1SE-1205/H2-R 12 5 200 73 1000 R1SE-1505/H2-R 15 5 200 74 1000 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max. capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter E358085 UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified EN55032 compliant Model Numbering R1SE- __ __ /H2-R Single Input Voltage Tape and Reel Packaging 2kVDC/1s Isolation Output Voltage Ordering Examples: R1SE-0505/H2-R: Single Output, 5VDC Input, 5VDC Output, 2kVDC/1s isolation and tape and reel packaging www.recom-power.com REV.: 3/2019 ECO-1 R1SE/H2 DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage and rated current unless otherwise specified) BASIC CHARACTERISTICS Parameter Condition Min. Input Voltage Range Typ. Max. ±10% 20kHz Internal Operating Frequency Output Ripple and Noise (3) 20MHz BW 60kHz 100kHz 50mVp-p 100mVp-p Notes: Note3: Measurements are made with a 100nF MLCC across output (low ESR) Efficiency vs. Load 100 90 Efficiency [%] 80 70 60 50 40 30 0505 0512 0515 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy -2.0% typ. / ±5.0% max. Line Regulation low line to high line, full load Load Regulation 20% to 100% load ±1.0% typ. / ±1.5% max. 6.0% typ. / 10.0% max. Tolerance Envelope Output Voltage [%] +10% +5% Typical L +5% oad Lin Vnom e -2% -5% 20 50 100 Output Load [%] continued on next page www.recom-power.com REV.: 3/2019 ECO-2 R1SE/H2 DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage and rated current unless otherwise specified) Deviation vs. Load R1SE-05xx/H2-R 25 0505 0512 0515 20 15 10 5 10 5 0 0 -5 -5 0 10 20 30 40 50 60 70 80 90 3.305 1205 1505 20 Deviation [%] Deviation [%] 15 -10 R1SE-xx05/H2-R 25 -10 100 0 10 20 30 Output Load [%] 40 50 60 70 80 90 100 Output Load [%] PROTECTIONS Parameter Type Isolation Voltage Isolation Resistance I/P to O/P Value tested for 1 second Viso = 500V 2kVDC 10GΩ min. Isolation Capacitance 75pF max. Notes: Note4: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Condition Operating Temperature Range Value full load @ free air convection -40°C to +100°C Operating Altitude 2000m Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 MTBF according to MIL-HDBK-217F, G.B. +25°C +85°C 2992 x 103 hours 955 x 103 hours Derating Graph (@ free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature [°C] www.recom-power.com REV.: 3/2019 ECO-3 R1SE/H2 DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage and rated current unless otherwise specified) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety E358085-A2-UL UL60950-1, 2nd Edition:2007 CAN/CSA C22.2 No. 60950-1-03, 2nd Edition:2007 EAC RU-AT.49.09571 TP TC 004/2011 RoHS 2+ RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Electromagnetic compatibility of multimedia equipment Emission requirements Standard / Criterion EN55032, Class B EN55032, Class A with external filter EMC Filter Suggestion according to EN55032 C3 L1 +Vin C1 +Vin +Vout -Vin -Vout +Vout C2 -Vin -Vout C4 Component List Class A MODEL C1 Component List Class B L1 R1SE-0505/H2 R1SE-0512/H2 R1SE-1205/H2 N/A R1SE-1505/H2 N/A C2 6.8µF 50V MLCC 10µF 100V MLCC C3 and C4 MODEL C1 L1 C3 (safety) C4 (safety) R1SE-0505/H2 R1SE-0512/H2 N/A R1SE-1205/H2 10µF 12µH choke 100V MLCC RLS-126 330pF 330pF R1SE-1505/H2 Notes: Note5: Filter suggestions are valid for indicated part numbers only. For other part numbers, please contact RECOM tech support for advice DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case non-conductive black plastic (UL94 V-0) Dimension (LxWxH) 12.75 x 10.7 x 6.7mm Weight 1.0g typ. continued on next page www.recom-power.com REV.: 3/2019 ECO-4 R1SE/H2 DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage and rated current unless otherwise specified) Dimension Drawing (mm) 5 Pin Single SMD Package embossed logo Pin Connections Pin # 7.0 10.7 0.25 6.7 12.75 3x2.54=7.62 0.50 Recommended Footprint Details 8 5 8 5 Top View 1 2 4 -Vin 2 +Vin 4 -Vout 5 +Vout 8 NC NC = No Connection Tolerance: xx.x= 0.5mm xx.xx= 0.25mm 1.80 4 12.00 1 2 Bottom View 2.54 8.50 11.10 Single 1 1.20 PACKAGING INFORMATION Packaging Dimension (LxWxH) Packaging Quantity tape and reel (carton) tape and reel Tape Width 355.0 x 342.0 x 36.0mm 500pcs 24.0mm Storage Temperature Range -55°C to +125°C Storage Humidity 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 3/2019 ECO-5