R1Z-2409/H-R

Features Regulated Converters ● ● ● ● ● ● 1kVDC & 2kVDC Isolation UL94V-0 Package Material RoHS 6/6 Toroidal Magnetics Optional Continuous Short Circuit Protected Built-In EN55022 Class A Filter ECONOLINE DC/DC-Converter with 3 year Warranty Description The R1Z series DC/DC converter has been designed for isolating or converting DC power rails where an SMD format with regulated output is required, although it is no larger than a standard unregulated SMD converter. Selection Guide Part Number SMD 2kVDC Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Max Capacitive Load(1) R1Z-xx3.3* (/H) 3.3, 5, 12, 15, 24 3.3 303 2200µF R1Z-xx05* (/H) 3.3, 5, 12, 15, 24 5 200 1200µF R1Z-xx09* (/H) 3.3, 5, 12, 15, 24 9 111 680µF R1Z-xx12* (/H) 3.3, 5, 12, 15, 24 12 84 680µF R1Z-xx15* (/H) 3.3, 5, 12, 15, 24 15 66 470µF 1 Watt SMD Miniature Isolated Single Output xx= Input Voltage (other input and output voltage combinations available on request *add suffix -R for tape & reel packing e.g. R1Z-0505-R *add suffix /P for continuous short circuit protection, e.g. R1Z-0505/P-R Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range Output Voltage Accuracy Line Voltage Regulation Load Voltage Regulation Output Ripple and Noise (at 20MHz BW) Operating Frequency Efficiency at Full Load Minimum Load No Load Power Consumption Isolation Voltage For detailed information see Application Notes chapter "MTBF" Conducted / Radiated Emissions EN55022 Level A EN General Safety Report: SPCLVD1211033-3 EN60950-1:2006 + A12:2011 EN Medical Safety Report: MDD1205098-4 + RM1205098-4 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment UL General Safety Report: E358085 UL60950-1, 2nd Edition www.recom-power.com REV: 0/2015 RoHS E358085 2011/65/EU 6/6 EN-60950-1 Certified EN-60601-1 Certified* UL-60950-1 Certified (*/H suffix) R1Z Derating-Graph (Ambient Temperature) 100 80 Output Power (%) ±5% ±2% 1% max. 1% max. 100mVp-p max. 20kHz min. / 40kHz typ. / 80kHz max. 50% min. / 60% typ. 10% (2) 134mW min. / 217mW typ. / 350mW max. (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz Isolation Voltage H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) 1000VAC / 60Hz Isolation Capacitance 70pF typ. Isolation Resistance 10 GW min. Short Circuit Protection 1 Second P-Suffix Continuous Operating Temperature Range (natural convection) -40°C to +70°C (see Graph) Storage Temperature Range -55°C to +125°C Reflow Temperature ROHS compliant 245°C (30 sec) max. Vapor Phase Process 230°C (90 sec) max. (for more details see Application Notes) Relative Humidity 95% RH Package Weight 1.6g Packing Quantity 33 pcs per tube 250 pcs per Reel MTBF R1Z (+25°C) using MIL-HDBK 217F 2203 x 103 hours (+70°C) using MIL-HDBK 217F 391 x 103 hours R1Z/P (+25°C) using MIL-HDBK 217F 2387 x 103 hours (+70°C) using MIL-HDBK 217F 641 x 103 hours 60 40 Safe Operating Area 20 -40 -20 0 20 40 60 80 100 70 85 Operating Temperature (°C) **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes E-119 R1Z Series ECONOLINE DC/DC-Converter Typical Characteristics Efficiency / Load 100 80 80 3.33.3 0% 40% 20% 80% 60% 0 Total Output current (%) R1Z-15xx/P 100% 80% 80 243.3 60 Efficiency % 2412 20 0% 20% 40% 60% Total Output current (%) 80% 3.33.3 80 60 R1Z-12xx 3.315 20 0 3.305 0% 20% 40% 60% Total Output current (%) 40 20 60 load on the output to the maintain specified 40 regulation. Operating under no-load conditions will not damage these devices; however, they 40% 60% 80% 100% 100% 80% 2415 80 Note 2: The R1Z series requires a minimum of 10% 1212 1215 0% 20% 40% 60% Total Output current (%) 100 may not meet all listed specifications. Total Output current (%) Efficiency % 60 0505 R1Z-15xx 1second without damage to the converter 1205 0512 Efficiency / Load capacitive load that will allow start up in under 123.3 20% 0 100% 80% Note 1: Maximum capacitive load is defined as the 100 0515 20 Notes Efficiency / Load 053.3 40 40 100% 100% 80% 100 3.312 Efficiency % 2415 40 0% 0% 20% 40% 60% Total Output current (%) R1Z-05xx 60 80 0 1212 Efficiency / Load 100 2405 80 Efficiency % 0% 20% 40% 60% Total Output current (%) R1Z-3.3xx 100 Efficiency % 0515 1215 20 Efficiency / Load Efficiency / Load R1Z/P 60 0512 20 100% 123.3 1205 40 40 3.312 3.315 20 0 053.3 Efficiency % 40 0 0505 60 Efficiency % Efficiency % 100 3.305 80 0 Efficiency / Load Efficiency / Load 100 60 R1Z-12xx/P R1Z-05xx/P R1Z-3.3xx/P 20 0 2405 243.3 0% 20% 40% 60% Total Output current (%) 2412 80% 100% Package Style and Pinning (mm) 10 PIN Single SMD Package Ordering Example: R1Z-0505 (5V Input, 5V Output, not short circuit protected) R1Z-0505/HP (5V Input, 5V Output, 2kVDC Isolation and short circuit protection) 10.7 15.24 8.7 9.0 Pin Connections 8.50 11.10 2.54 x 4=10.16+/-0.5 Pin # Recommended Footprint Details 10 7 RECOM R1Z-0705/P 1122 1 2 0.50 4 5 Top View 1.80 1 2 4 8.50 12.0 Function 1 –Vin 2 +Vin 4 -Vout 5 -Vout 7 +Vout 10 NC NC= No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm 2.54 1.20 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-120 REV: 0/2015 www.recom-power.com