R2S-xx3.3

Features Unregulated Converters ● ● ● ● ● ● ● ● Fully RoHS 6/6 Conform Full Power at 100°C Ambient Temperature 1kVDC and 3kVDC Isolation Options /H Version Certified for Medical Applications UL/EN/CSA Certified, CB Report Suitable for Fully Automated Assembly (including Vapour Phase Soldering) Optional Continuous Short Circuit Protection Efficiency to 85% ECONOLINE DC/DC-Converter Description The R2S and R2D converters are of the enclosed open frame type, meaning that they are unpotted. The converters are typically used in general purpose and industrial low power isolation and voltage matching applications where an SMD converter is required. The converter series feature an extended ambient temperature operating range of -40°C ~ +100°C without derating and optional continuous short circuit protection. In addition to two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines. 2 Watt SMD Single & Dual Output Selection Guide Part Number SMD Input Voltage (VDC) 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 5, 12, 15, 24 Output Voltage (VDC) 3.3 5 9 12 15 24 ±5 ±9 ±12 ±15 Output Current (mA) 606 400 222 167 133 83 ±200 ±111 ±83 ±66 Efficiency (%) 70-75 76-85 76-85 76-85 76-85 76-85 75-80 75-80 75-83 75-85 75-85 2002/95/EC 6/6 (3kV) R2S**-xx3.3 (H) R2S**-xx05 R2S**-xx09 R2S**-xx12 R2S**-xx15 R2S**-xx24 R2D**-xx05 R2D**-xx09 R2D**-xx12 R2D**-xx15 (H) (H) (H) (H) (H) (H) (H) (H) (H) RoHS E-224736 UL-60950-1 Certified EN-60950-1 Certified EN-60601-1 Certified (Suffix /H) R2D**-xx24 (H) 5, 12, 15, 24 ±24 ±42 xx = Input Voltage. Other input and output voltage combinations available on request. * add Suffix “P” for Continuous Short Circuit Protection, e.g. R2S-0505/P, R2D-0505/HP * add suffix -R for tape&reel packing e.g. R2S-0505-R. For more details see Tapes Section. R2S-R2D Case and Pinning Options (note restrictions on /H option) R2S** : ** without marking denotes 5 pins out of 8 fitted (/H option available) ** with marking 8 denotes 8 pins out of 8 fitted (/H option not available) ** with marking 12 denotes 10 pins out of 12 fitted (/H option available) R2D** : ** without marking denotes 6 pins out of 10 fitted (/H option available) ** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available) ** with marking 12 denotes with 10 pins out of 12 fitted (/H option available) Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range Output Voltage Accuracy Line Voltage Regulation Load Voltage Regulation (10% to 100% full load) Output Ripple and Noise (20MHz limited) Operating Frequency Efficiency at Full Load No Load Power Consumption RTS typ. RTD typ. 3.3V output types 5V output type 9V, 12V, 15V, 24V output types ±10% ±5% 1.2%/1% of Vin max. 20% max. 15% max. 10% max. 150mVp-p max. 20kHz min. / 40kHz typ. / 85kHz max. 70% min. / 80% typ. 124mW min. / 186mW typ. / 350mW max. 159mW min. / 192mW typ. / 350mW max. cont. www.recom-international.com REV:3/2010 E-45 Refer to Application Notes ECONOLINE DC/DC-Converter Specifications - Continued Isolation Voltage H-Suffix Rated Working Voltage Isolation Capacitance Isolation Resistance Short Circuit Protection P-Suffix Operating Temperature Range (free air convection) Storage Temperature Range Reflow Temperature Vapour Phase Process Relative Humidity Package Weight (tested for 1 second) (tested for 1 second) (long term isolation) 1000VDC min. 3000VDC min. see Application Notes 20pF min. / 115pF max. 10 GΩ min. 1 Second Continuous -40°C to +100°C (see Graph) Output Power (%) R2S & R2D Series Derating-Graph (Ambient Temperature) R2S-0505, R2D-0505 100 80 60 40 20 0 -40 0 50 150 -55°C to +125°C ROHS compliant 245°C (30 sec), peak 255°C (5 sec) max. (for more details see Application Notes) 230°C (90 sec) max. R2S, R2S8 R2D, R2D10 R2S12, R2D12 R2S, R2S8 R2S12, R2D, R2D10, R2D12 All Types 95% RH 1.4g 1.6g 2.0g 39 pcs per Tube 33 pcs per tube 250 pcs per Reel 886 x 103 hours 128 x 103 hours Safe Operating Area 100 110 Operating Temperature °C Packing Quantity MTBF (+25°C) (+85°C) Certifications CB Test Report Report: US/14402/UL UL General Safety Report: E322406 CUL General Safety EN General Safety EN Medical Safety } Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F using MIL-HDBK 217F The derating graph is valid only for the shown part numbers. The converters have been tested at full load with 100°C ambient temperature and all internal component temperatures are within limits. However, Recom can only guarantee continuous operation of up to +85°C to maintain the validity of the UL certificates. UL 60950-1 1st Ed. C22.2 No. 60950-1-03 EN-60950-1 2rd Ed. EN-60601-1 R2S-R2D Typical Characteristics Efficiency / Load 100 Deviation / Load 1205 Deviation from Nominal (%) 25.000 20.000 15.000 10.000 5.000 0.000 -5.000 -10.000 0505 R2S-xx05 Efficiency % 80 60 40 20 0 0505 1205 2405 2405 0% 20% 40% 60% 80% 100% Total Output current (%) 0% 20% 40% 60% Total Output current (%) 80% 100% Efficiency / Load 100 25.000 Deviation / Load 1205 Deviation from Nominal (%) 20.000 15.000 10.000 5.000 0.000 -5.000 -10.000 80 60 0505 1205 Efficiency % R2D-xx05 40 20 0 0505 2405 2405 0% 20% 40% 60% 80% 100% Total Output current (%) 0% 20% 40% 60% Total Output current (%) 80% 100% E-46 REV: 3/2010 www.recom-electronic.com ECONOLINE DC/DC-Converter EMC Filtering - Suggestion for EN55022 Class B (Conducted and Emitted) 470pF/4kVDC Input 3.3µH R2S & R2D Series Output R2S** + 3.3µF 470pF/4kVDC +Vout Input 3.3µH R2D** + 3.3µF Com -Vout Package Style and Pinning (mm) 3rd angle projection 8 PIN Single SMD Package 10 PIN Dual SMD Package R2S-R2D 12.75 10.7 8 5 10 7 RECOM R2D-xxxx xxxx 15.24 10.7 8.7 2.54 x 3 9.0* 8.50 11.10 *R2S-05xx/HP = 9.4mm RECOM R2S-xxxx xxxx 8.7 2.54x4 9.0 8.50 11.10 12 4 12 45 Pin Connections Pin # Single –Vin +Vin –Vout +Vout No Pin NC No Pin Dual –Vin +Vin Com –Vout +Vout No Pin NC Bottom View Recommended Footprint Details 0.50 12.00 8 Top View 1 2 4 Recommended Footprint Details 0.50 12.00 10 Top View 5 4 1.80 5 7 8 10 7 Bottom View 12 12 45 1.80 2.54 1.20 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm 2.54 1.20 R2S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option) ** with marking 8 denotes 8 pins out of 8 fitted (/H option not available) R2D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option) ** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available) www.recom-international.com REV:3/2010 e.g. R2S-0505, R2S-0505/H, R2S-0505/HP e.g. R2S8-0505, R2S8-0505/P e.g. R2D-0505, R2D-0505/H, R2D-0505/HP e.g. R2D10-0505, R2D10-0505/P E-47 ECONOLINE DC/DC-Converter Package Style and Pinning (mm) Full 8 PIN Single SMD Package Note: /H option is not available in these pin packages R2S & R2D Series Full 10 PIN Dual SMD Package 12.75 10.7 8765 10 9 8 7 6 RECOM R2D10-xxxx xxxx 15.24 10.7 8.7 2.54 x 3 9.0* 8.50 11.10 *R2S8-05xx/HP = 9.4mm RECOM R2S8-xxxx xxxx 8.7 2.54x4 9.0 8.50 11.10 1234 Pin Connections Pin # 1 2 3 Single –Vin +Vin NC –Vout +Vout NC NC NC - 12345 Dual –Vin +Vin NC Com –Vout NC +Vout NC NC NC Bottom View Recommended Footprint Details 0.50 12.00 8 765 Top View Recommended Footprint Details 0.50 12.00 10 9 8 7 6 Top View 4 5 6 7 Bottom View 1234 1.80 12 34 5 1.80 2.54 1.20 8 9 10 2.54 1.20 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm R2S_R2D 12 PIN Single and Dual SMD Package Note: /H option is available in this pin package 3rd angle projection 15.24 12 11 10 87 8.7 2.54x5 9.0* 10.7 RECOM R2S_R2D12-xxxx xxxx Pin Connections Pin # 1 Single –Vin +Vin NC –Vout NC NC +Vout NC NC NC Dual –Vin +Vin NC Com –Vout NC +Vout NC NC NC 123 56 8.50 11.10 *R2S12-05xx/HP = 9.4mm 2 3 5 6 7 8 10 11 12 Separation > 3.8 mm 0.55 12.00 12 1110 123 Top View 87 56 1.80 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm Bottom View 1.20 Recommended Footprint Details R2S** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) R2D** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) e.g. R2S12-0505, R2S12-0505/H, R2S12-0505/HP e.g. R2D12-0505, R2D12-0505/H, R2D12-0505/HP E-48 REV: 3/2010 www.recom-electronic.com