R2SX-2415/H-TRAY

Features Unregulated Converters • • • • • 2 Watt power supply in SMD package -40°C to +100°C operating temperature 3kVDC/1 second or 1kVDC/1 second isolation No minimum load required IEC/EN/UL62368-1 certified, CB Report Description The R2SX is a low profile, open-frame 2W SMD isolated DC/DC converter with either 3kVDC/1 second isolation (/H version) or 1kVDC/1 second isolation options. There is no minimum load requirement and the efficiency stays high over a wide 20% to 100% load range. The operating temperature is from -40°C up to +75°C at full load, and up to +100°C with derating. The converters are fully certified to IEC/EN/UL62368-1 and are 10/10 RoHS-conform. A simple low cost LC filter is all that is needed for Class B EMC compliance. The R2SX comes with a 3-year warranty. DC/DC Converter R2SX 2 Watt SMD Single Output Selection Guide Part Number nom. Input Output Output Efficiency max. Capacitive Voltage Voltage Current typ. (1) Load (2) [VDC] [VDC] [mA] [%] [µF] R2SX-053.3 5 3.3 606 79 3300 R2SX-0505 5 5 400 81 3300 R2SX-1205 12 5 400 84 3300 R2SX-2405 24 5 400 85 3300 R2SX-2415 24 15 133 85 680 R2SX-2424 24 24 84 86 220 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load Model Numbering E224736 UL62368-1 certified CAN/CSA-C22.2 No. 62368-1-14 certified UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified IEC/EN62368-1 certified EN55032 compliant EN55024 compliant CB report R2 SX-__ __ / _ -R Output Power “PACKAGING INFORMATION” (4) Single Isolation Voltage (3) Output Voltage nom. Input Voltage Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix „/H“, high isolation voltage (3kVDC/1 second) Note4: with suffix „-R“, standard packaging tape and reel with suffix „-Tray“ for optional tray packaging Ordering Examples: R2SX-0505-R R2SX-2424/H-R R2SX-2424/H-Tray 5Vin 24Vin 24Vin www.recom-power.com 5Vout 24Vout 24Vout Single Output Single Output Single Output 1kVDC/1 second isolation 3kVDC/1 second isolation 3kVDC/1 second isolation tape and reel packaging tape and reel packaging tray packaging REV.: 1/2019 ECO-1 R2SX DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter capacitor Input Voltage Range ±10.0% 500mA 200mA 100mA 40mA 30mA 15mA nom. Vin = 5VDC nom. Vin= 12VDC nom. Vin = 24VDC nom. Vin = 5VDC nom Vin= 12VDC nom. Vin = 24VDC Input Current Quiescent Current Minimum Load 0% 20kHz Internal Operating Frequency Output Ripple and Noise (5) 20MHz BW 150mVp-p Notes: Note5: Measurements are made with a 0.1µF MLCC across output. (low ESR) Efficiency vs. Load R2SX-0505S(/H) 100 90 90 80 80 70 70 60 50 40 60 50 40 30 30 20 20 10 10 0 Efficiency [%] Efficiency [%] 100 0 10 20 30 40 50 60 70 80 90 0 100 90 80 80 70 70 60 50 40 50 60 20 10 10 40 50 60 70 80 90 100 Output Load [%] 80 90 100 70 80 90 100 40 20 30 70 50 30 www.recom-power.com 40 60 30 20 30 R2SX-2424S(/H) 90 10 20 R2SX-2405S(/H) 100 0 10 Output Load [%] 100 0 0 Output Load [%] Efficiency [%] Efficiency [%] R2SX-053.3S(/H) 0 0 10 20 30 40 50 60 Output Load [%] REV.: 1/2019 ECO-2 R2SX DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified) REGULATIONS Parameter Condition Value Output Accuracy ±5.0% max. Line Regulation low line to high line 3.3Vout, 5Vout 12Vout 15Vout, 24Vout 10% to 100% load Load Regulation (6) ±1.2% typ. at 1.0% of Vin typ. 15.0% max. 10.0% max. Notes: Note6: Operation below 10% load will not harm the converter, but specifications may not be met Tolerance Envelope R2SX-05xx(/H) R2SX-12xx(/H) +15% +10% Typic a l Loa d Lin +5% e Vnom Output Voltage [%] Output Voltage [%] +9% -1.5% -5% 10 50 +6% +5% oad Lin e Vnom -1% -5% 10 100 Output Load [%] Typical L 50 100 Output Load [%] R2SX-24xx(/H) Output Voltage [%] +10% +5% Typical Lo a d Line Vnom +5% -0.5% -5% 10 50 100 Output Load [%] PROTECTIONS Parameter Type Value I/P to O/P standard tested for 1 second rated for 1 minute (7) 1kVDC 500VAC I/P to O/P with suffix “/H” tested for 1 second rated for 1 minute (7) Isolation Resistance 3kVDC 1.5kVAC 10GΩ min. Isolation Capacitance 100pF max. Isolation Voltage Insulation Grade functional Notes: Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note8: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type www.recom-power.com REV.: 1/2019 ECO-3 R2SX DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified) ENVIRONMENTAL Parameter Operating Temperature Range Condition Value @ natural convection and full load (refer to “Derating Graph” ) -40°C to +75°C Operating Altitude 5000m Operating Humidity non-condensing 5% - 95% RH max. Pollution Degree PD2 Vibration according to MIL-STD-202G MTBF according to MIL-HDBK-217F, G.B. +25°C +75°C 12100 x 10³ hours 4400 x 10³ hours Derating Graph (@ Chamber) 100 Output Load [%] 90 80 75 70 60 50 40 30 20 10 natural convection (0.1m/s) 0.5m/s forced air 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 75 85 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Audio/video, information and communication technology equipment - Safety requirements E224736 Information Technology Equipment, General Requirements for Safety Audio/video, information and communication technology equipment - Safety requirements (CB Scheme) Audio/video, information and communication technology equipment - Safety requirements Standard UL62368-1, 2nd Edition, 2014 CAN/CSA -C22.2 No. 62368-1-14, 2nd Edition UL60950-1, 2nd Edition, 2014 CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition IEC62368-1:2014, 2nd Edition WD-ITAV-190016-A0 RoHS2 EN62368-1:2014 + A11:2017 RoHS 2011/65/EU + AM2015/863 continued on next page www.recom-power.com REV.: 1/2019 ECO-4 R2SX DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified) EMC Compliance Condition Electromagnetic Compatibility of Multimedia Equipment - Emission Requirements Standard / Criterion with external filter (see filter suggestion below) EN55032:2015 + AC:2016, Class B Information technology equipment - Immunity characteristics - Limits and methods of measurement WH-CE-E1803002 EN55024:2010 + A1:2015 ESD Electrostatic discharge immunity test Air: ±2, 4, 6, 8kV Contact: ±2, 4kV EN61000-4-2:2009, Criteria A Radiated, radio-frequency, electromagnetic field immunity test Fast Transient and Burst Immunity 1, 3, 10V/m EN61000-4-3:2010, Criteria A DC Power Port: ±0.5, 1, 2kV EN61000-4-4:2012, Criteria A DC Power Port: ±0.5, 1kV EN61000-4-5:2017, Criteria B 10V r.m.s EN61000-4-6:2014, Criteria A 50Hz / 1A/m EN61000-4-8:2010, Criteria A Surge Immunity Immunity to conducted disturbances, induced by radio-frequency fields Power Magnetic Field Immunity EMC Filtering Suggestions for EN55032 C2 L1 +Vin +Vin +Vout -Vin -Vout +Vout C1 -Vin Component List Class B Model C1 L1 R2SX-05xx 10µF MLCC 10µH SMD Inductor R2SX-12xx 4.7µF MLCC 22µH SMD Inductor R2SX-24xx 10µF MLCC 47µH SMD Inductor -Vout C2 470pF/4kVDC DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material base PCB black plastic, (UL94V-0) FR4, (UL94V-0) Package Dimension (LxWxH) 15.24 x 11.1 x 8.0mm Package Weight 1.6g typ. continued on next page www.recom-power.com REV.: 1/2019 ECO-5 R2SX DC/DC Converter Series Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified) suckable area Dimension Drawing (mm) 8.0 max. CG 0.25±0.10 Pin Connection Pin # Single 1 -Vin 2 +Vin 4 NC 5 -Vout 7 +Vout 10 NC 0.50±0.10 0.80 11.1 4 x 2.54= 10.16 Recommended Footprint Details 1 2 4 5 10 10.7 Bottom View 10 1.27 2.54 15.24 7 Top View 1 2 7 12.07 2.50 CG= center of gravity NC= no connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 4 5 2.54 PACKAGING INFORMATION Packaging Dimension (LxWxH) Packaging Quantity tape and reel (carton) reel 355.0 x 340.0 x 35.0mm 330.2 x 330.2 x 30.0mm tray 260.0 x 205.0 x 27.0mm tape and reel 250pcs tray 30pcs Tape Width Storage Temperature Range 24.0mm non-condensing Storage Humidity -55°C to +125°C 5% - 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2019 ECO-6