RAC05-12SC/W

!NOT RECOMMENDED FOR NEW DESIGNS! LAST TIME BUY: 30TH OCT 2020, 3.3SC, 09SC, 05DC LAST TIME BUY: 27TH NOV 2020, WIRED VERSION Regulated Converters • Universal input 80-264VAC • High efficiency up to 77% • Isolated output 3kVAC/1 minute • Short circuit protection • Meet EN55032 class B • Low standby power consumption Description RAC05-C 5 Watt Single & Dual Output YEA R 3 arrant w Compact, low cost, high efficiency, universal input switching AC/DC power module for PCB or wired mounting with single or dual outputs. CE/EAC marked and UL/cUL certified. AC/DC Converter y Features Selection Guide T Part Input Output Output Efficiency Max. Capacitive Number Voltage Range Voltage Current typ (1) Load (2,3) [VAC] [VDC] [mA] [%] [µF] RAC05-3.3SC (4) 80-264 3.3 1250 70 12000 RAC05-09SC (4) 80-264 9 556 75 2500 RAC05-05DC (4) 80-264 ±5 ±500 73 ±3000 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Measured @ 230VAC / 50Hz / Ta=25°C with constant resistant mode at full load Note3: If used @ 115VAC / 60Hz with full load, max. capacitive load is less, please contact RECOM Techsupport for detailed information T U M ERP compliant TS TS compliant C D IA N T PRO CO NVE R S NRND (Last time buy: 30 Oct 2020) PL CO CO 10 from 10 M M REACH compliant th O R S RoHS 2 + C P C C O N V ER RE M E O R C E RE Part Input Output Output Efficiency Max. Capacitive Number Voltage Range Voltage Current typ (1) Load (2,3) [VAC] [VDC] [mA] [%] [µF] RAC05-05SC (4) 80-264 5 1000 73 6800 RAC05-12SC (4) 80-264 12 420 76 1500 RAC05-15SC (4) 80-264 15 340 76 750 RAC05-24SC (4) 80-264 24 210 77 330 RAC05-12DC (4) 80-264 ±12 ±210 76 ±560 RAC05-15DC (4) 80-264 ±15 ±170 76 ±220 U LIA D N T PRO E224736 UL60950-1 certified CAN/CSA-C22.2 No. 60950-1 certified IEC/EN60950-1 certified EN55032 compliant EN55024 compliant PREFERRED ALTERNATIVES Please consider these alternatives: Model Numbering RAC05-K/277/W Series RAC05-__ _C/W nom. Output Power Wired option (4) nom. Output Voltage Single or Dual RAC10-K/277 Series Notes: Note4: add suffix „/W“ for wired version without suffix, standard THT version Ordering Examples: RAC05-05SC 5 Watt RAC05-05SC/W 5 Watt RAC05-12DC 12 Watt RAC05-12DC/W 12 Watt www.recom-power.com 5Vout Single Output THT version 5Vout Single Output wired version 5Vout Dual Output THT version 5Vout Dual Output wired version REV.: 3/2020 PA-1 ! NOT RECOMMENDED FOR NEW DESIGNS ! LAST TIME BUY: 30TH OCT 2020, 3.3SC, 09SC, 05DC & 27TH NOV 2020, WIRED VERSIONS RAC05-C Series AC/DC Converter Specifications (measured at Ta= 25°C, full load otherwise noted) BASIC CHARACTERISTICS Parameter Input Voltage Range (5) Condition Min. nom. Vin = 230VAC 80VAC 115VDC Typ. 115VAC 230VAC Input Current Inrush Current Max. 264VAC 370VDC 110mA 70mA 115VAC 230VAC 400 x 10 hours >200 x 103 hours +25°C +55°C according to MIL-HDBK-217F, G.B. 3 Line Derating 100 100 90 90 80 80 70 70 Output Load [%] Output Load [%] (@Chamber and natural convection 0.1m/s) 60 50 40 60 50 40 30 30 20 20 10 10 0 -25 -10 5 20 35 50 65 80 55 70 75 95 110 Ambient Temperature [°C] www.recom-power.com 0 80 90 264 Input Voltage [VAC] REV.: 3/2020 PA-3 ! NOT RECOMMENDED FOR NEW DESIGNS ! LAST TIME BUY: 30TH OCT 2020, 3.3SC, 09SC, 05DC & 27TH NOV 2020, WIRED VERSIONS RAC05-C Series AC/DC Converter Specifications (measured at Ta= 25°C, full load otherwise noted) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment - General Requirments for Safety E224736-A1-UL Information Technology Equipment - General Requirments for Safety SPCLVD1605077-06 EAC Safety of Low Voltage Equipment RU-AT.AB37.B.02367 RoHS2+ Standard UL60950-1, 2nd Edition, 2007 CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition, 2007 IEC60950-1:2005 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 TP TC 004/2011 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Electromagnetic compatibility of multimedia equipment – Emission Requirements EN55032:2015 Information technology equipment - Immunity characteristics - Limits and methods of measurement ESD Electrostatic discharge immunity test EN55024:2010 + A1:2015 Air ±8.0kV, Contact ±4.0kV IEC61000-4-2:2008, Criteria A 3V/m IEC61000-4-3:2008, Criteria A Radiated, radio-frequency, electromagnetic field immunity test Fast Transient and Burst Immunity Surge Immunity Immunity to conducted disturbances, induced by radio-frequency fields Standard / Criterion AC Power Port: ±1.0kV IEC61000-4-4:2004, Criteria A AC Power Port: L-N ±1.0kV IEC61000-4-5:2005, Criteria A AC Power Port 3.0V IEC61000-4-6:2008, Criteria A Power Magnetic Field Immunity 50Hz, 1A/m Voltage Dips and Interruptions Voltage Dips >95% Voltage Dips 30% Voltage Interruptions > 95% IEC61000-4-8:2009, Criteria A IEC61000-4-11:2004, Criteria A IEC61000-4-11:2004, Criteria A IEC61000-4-11:2004, Criteria B Limits of Harmonic Current Emissions EN61000-3-2:2014, Class A Limits of Voltage Fluctuations & Flicker EN61000-3-3:2013 DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting black plastic (UL94V-0) epoxy (UL94V-0) Dimension (LxWxH) single dual 50.9 x 25.5 x 16.4mm 53.5 x 27.8 x 16.4mm Weight THT version wired version 35g typ. 38g typ. continued on next page www.recom-power.com REV.: 3/2020 PA-4 ! NOT RECOMMENDED FOR NEW DESIGNS ! LAST TIME BUY: 30TH OCT 2020, 3.3SC, 09SC, 05DC & 27TH NOV 2020, WIRED VERSIONS RAC05-C Series AC/DC Converter Specifications (measured at Ta= 25°C, full load otherwise noted) Dimension Drawing Single (mm) embossed logo Pin Connections Pin # Single 1 VAC in (N) 2 VAC in (L) 3 +VDC out 4 -VDC out 5 no pin 25.5 6.1 0.75 16.4 50.9 5.0 Ø1.0±0.1 tc= case temperature measuring point Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm Recommended Footprint Details restricted area for PCB layout Bottom View 5.0 2.54 1 12.75 tc 3 4 1 Top View 4 10.16 8.0 2 2.54 3 2 45.72 Dimension Drawing Dual (mm) embossed logo 27.8 6.1 0.75 16.4 53.5 Pin Connections Pin # Dual 1 VAC in (N) 2 VAC in (L) 3 +VDC out 4 Com 5 -VDC out tc= case temperature measuring point Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 5.0 Ø1.0±1.0 Recommended Footprint Details 1 3 10.16 4 1 Top View 20.32 tc 5.0 10.16 13.90 Bottom View 3 8.0 5 2 2.54 2.54 restricted area for PCB layout 2 4 5 45.72 continued on next page www.recom-power.com REV.: 3/2020 PA-5 ! NOT RECOMMENDED FOR NEW DESIGNS ! LAST TIME BUY: 30TH OCT 2020, 3.3SC, 09SC, 05DC & 27TH NOV 2020, WIRED VERSIONS RAC05-C Series AC/DC Converter Specifications (measured at Ta= 25°C, full load otherwise noted) Dimension Drawing Single wired (mm) embossed logo 25.5 0.75 16.4 50.9 88.0 5.0 Wired information 10.0 # 1 2 3 4 Ø2.40 8.0 Ø1.60 L brown tc Ø0.76 Ø0.76 5.0 - black Bottom View N blue Function VAC in (N) VAC in (L) +VDC out -VDC out Wire color blue bown red black Type UL-1015 UL-1015 UL-1007 UL-1007 AWG 22 22 22 22 Type UL-1015 UL-1015 UL-1007 UL-1007 UL-1007 AWG 22 22 22 22 22 tc= case temperature measuring point Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm + red Dimension Drawing Dual wired (mm) embossed logo 27.8 0.75 16.4 53.5 88.0 Wired information 10.0 # 1 2 3 4 5 Ø2.40 Ø1.60 5.0 Ø0.76 8.0 - Orange L Brown tc 5.0 Bottom View N Blue www.recom-power.com Com Black Function VAC in (N) VAC in (L) +VDC out Com -VDC out Wire color blue bown red black orange tc= case temperature measuring point Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm + Red REV.: 3/2020 PA-6 ! NOT RECOMMENDED FOR NEW DESIGNS ! LAST TIME BUY: 30TH OCT 2020, 3.3SC, 09SC, 05DC & 27TH NOV 2020, WIRED VERSIONS RAC05-C Series AC/DC Converter Specifications (measured at Ta= 25°C, full load otherwise noted) PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Packaging Quantity Type tube cardbox THT wired THT single THT dual wired Storage Temperature Range Storage Humidity Value 520.0 x 56.0 x 26.0 520.0 x 195.0 x 67.0 10pcs 9pcs 20pcs -40°C to +100°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 3/2020 PA-7