RACD60-1400

Features LED DRIVER ● ● ● ● ● ● ● ● AC-DC LED Power Supply 60W Dual Mode CV and CC Output Power Factor Corrected Universal Input Voltage Ranges Low Cost Open Frame Design High Efficiency Adjustable Current Limit Long 5 Year Warranty LIGHTLINE AC/DC-Converter with 5 year Warranty Description A compact universal input voltage 60W constant voltage/ constant current switching power module suitable for driving high power LEDs. The LED drivers have a dual mode of operation: CV mode: at loads below the preset current limit , the RACD60 behaves as a voltage source. CC mode: at loads above the preset current limit, the RACD60 behaves as a current source. Thus the same power supply can be used with both CV and CC LED modules. The current limit can be set by the user. The RACD 60 series have a universal input voltage range and are fully protected against output short circuit, overload and over-temperature. The converters feature built-in power factor correction as standard. 60 Watt PFC Single Output Selection Guide Part Number RACD60-4200* RACD60-2400* RACD60-2100* RACD60-1400* RACD60-1050* RACD60-700* Input Voltage Range (VAC) universal universal universal universal universal universal Output Voltage (VDC) 11 min - 13.5 max 17 min -24 max 21 min - 28 max 21 min - 28 max 33.5 min - 48 max 38 min - 54 max Output Current Preset Efficiency Max Adjust Range Current Limit (230VAC) Power (mA) (mA) (%) (W) 3570 - 4200 1700 - 2500 1400 - 2140 1400 - 2140 825 - 1250 700 - 850 4200 2400 2100 1400 1050 700 85 87 89 89 89 89 60W 60W 60W 60W 60W 46W 2002/95/EC 6/6 RoHS * add suffix /OF for open frame version (Standard) or add suffix /IP67 for potted version Specifications (typical at 25°C and after warm up time unless otherwise specified ) RACD60 Input Voltage Range Rated Power Input Frequency Range Power Factor Correction Input Current (full load) Inrush Current (cold start) Leakage Current Input Fuse Output Current Accuracy Output Current Adjust Line Voltage Regulation Load Voltage Regulation Minimum Load Current Output Ripple and Noise Operating Frequency Efficiency at Full Load Isolation Voltage (60Hz RMS) input to output (/OF Version) input to output (/IP67 Version) input to filter ground output to filter ground 20MHz limited,with 0.1µF + 47µF Full Load, 115VAC/230VAC 115VAC/230VAC 115VAC/230VAC 230VAC/63Hz Built-in Full load Preset Potentiometer LL to HL at Full Load 60% to 100% Load 90-264VAC 60 Watts max. 47-63 Hz > 0.9 0.8A / 0.4A max. 25A / 50A max.