! NOT RECOMMENDED FOR NEW DESIGNS !
Features
LED DRIVER
●
●
●
●
●
●
●
●
Buck-Boost LED Driver up to Vout=40V
Constant Current Output (350 or 500mA)
Digital PWM and Analogue Voltage Dimming
High Efficiency to 92%
EN60950-1 and UL60950-1 Certified
EMC Class A Without Extern Components
Pinned or Wired Version
5 Year Warranty
LIGHTLINE
DC/DC-Converter
with 5 year Warranty
Description
Constant
Current
Buck-Boost
LED Driver
The RBD-12 series is a Buck-Boost constant current source designed for driving high power LED applications.
Two output currents are available, 350mA and 500mA, and the maximum output voltage is 40V. The drivers
have digital and analogue voltage dimming control and a regulated reference 5V output. Typical applications
are solar, off-grid lighting, mobile traffic signs and battery-powered lighting. The wired version is IP67 rated.
Selection Guide
Part
Number
Input
Range
(VDC)
Output
Current
(mA)
Output
Voltage
(VDC)
Dimming
Control
Efficiency
typ.
(%)
RBD-12-0.35*
8-36
0-350
2-40
Digital + Analogue
92
RBD-12-0.50*
8-36
0-500
2-40
Digital + Analogue
92
*add suffix “/W“ for wired version with Vref output and analogue + PWM dimming control (seven wires)
Specifications (typical at 25°C, nominal input voltage, rated output current unless otherwise specified)
Operating Input Voltage Range
Absolute Maximum Input Voltage
Output LED String Voltage Range
(depending on the input voltage, see Safe Operating Area)
8-36VDC
38VDC
2V min. / 40V max.
Capacitor
Max. Capacitance Load
Output Current Accuracy
(Note 1)
100μF max.
±5% typ. / ±6.5% max.
Internal Power Dissipation
350mA (Vin=36V, Vout=40V)
1.63W typ.
500mA (Vin=36V, Vout=40V)
2.33W typ.
Output Current Stability (Note 2)
Vin=24V, Vout=2-40V
Output Current Ripple and Noise (20MHz BW) 350mA (Vin=24V, Vout=40V)
500mA (Vin=24V, Vout=40V)
Reflected Back Ripple Current (20MHz BW)
Vin=24V, Vout=6-40V
Switching Frequency
Efficiency at Full Load
L-16
±2% max.
35mAp-p typ.
45mAp-p typ.
70mAp-p max.
350kHz typ.
Vin=24V
Vref
Nominal 5V
PWM DIMMING CONTROL & REMOTE ON/OFF CONTROL
Input Voltage Range
Threshold Voltage
Device ON
Device OFF
Frequency
ANALOGUE DIMMING CONTROL
Input Voltage Range
Control Voltage Range
Operating Temperature
350mA
(see Derating Graph)
500mA
Case Temperature
Storage Temperature
Case Thermal Impedance
Soldering Temperature
Pinned Version
Relative Humidity
Short Circuit Protection
Continuous
Overtemperature Protection
(Auto Recovery)
Case Material
E224736
EN-60950-1 certified
UL-60950-1 certified
RBD-12
92% typ.
0.8mA max.
0V min. / 5V typ. / 10V max.
2V min.
0.1V max.
1000Hz max.
0V min. / 10V max.
0.2±0.1V min. / 1.5±0.1V max.
-40°C to +75°C
-40°C to +65°C
115°C max.
-55°C to +125°C
10°C/W
265°C/10sec. max.
95% RH max.
Auto Recovery
125°C ± 5°C (MOSFET)
Non Conductive Black Plastic
continued on next page
REV: 4/2022
Derating-Graph
(Ambient Temperature)
600
500
Output Current (mA)
RBD-12
Input Filter
RoHS
2011/65/EU
6/6
350
400
300
200
Safe Operating Area
100
0
-40
0
40 65 75
100
Operating Temperature °C
Refer to Application Notes
www.recom-power.com
! NOT RECOMMENDED FOR NEW DESIGNS !
RBD-12
Series
LIGHTLINE
DC/DC-Converter
Specifications (typical at 25°C, nominal input voltage, rated output current unless otherwise specified)
Potting Material
Silicone Potting Material (UL94V-0)
Case Dimensions
Package Weight
pinned version
wired version
pinned version
wired version
Packing Quantity
MTBF (using MIL-HDBK217F at 25°C)
Certification
EN General Safety
IEC General Safety
UL General Safety
All LED Drivers may not be used without a load.
They must be switched on the primary side only.
Noncompliance may damage the LED or reduce
its lifetime.
32.60 x 16.65 x 11.10 mm
13g
17g
29 pcs.
12 pcs.
1700 x 10³ hours
Report: SPCLVD1111102
Report: SPCLVD1111102
Report: E224736
Note 1: Output Current Accuracy is defined as:
[(Iout - Iout “rated“) / Iout “rated“] x 100
Note 2: Output Current Stability is defined as:
[(Iout “deviation“ - Iout “nominal“) / Iout “nominal“] x 100 Iout (deviation) = maximum Deviation
(min. Load, max. Load)
EN60950-1:2006 + A12:2011
IEC60950-1:2005
UL60950-1, 2nd Edition
Package Style and Pinning
RBD-12-x.xx - Through Hole Case
Unit: mm
Tolerance:
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
11.10
0.50
0.60
4.1
Pin Connections
Function
1
+Vin
DC Supply
2
Vref
Vref Voltage 5V typ.
16.65
32.60
3
1.00+0.15/-0
4x2.54
5
4
3
6
Bottom View
20
2.54
10.16
RBD-12-x.xx
Pin#
Comments
Analogue Dimming Leave open if not used
4
PWM/ON/OFF
Leave open if not used
5
GND
Do not connect to -Vout
7
6
-Vout
LED Cathode Connection
Tc
7
+Vout
LED Anode Connection
7
1
RBD-12-x.xx/W - Wired Version
27.94
93.0+/-3
11.10
32.60
(Brown) 6
5 (Black)
4
3
Bottom View
2
(Yellow) 7
1 (Red)
Wire Connections
Pin#
Function
10.0
Unit: mm
Tolerance:
X
± 1 mm
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
16.65
10.16
1
+Vin
2
Vref (5V typ.)
3
0.75
1.60
RBD-12
Top View
2.54
RBD-12-x.xx/W
Wire color
Red
Yellow
Analogue Dimming Green
4
PWM/ON/OFF
Blue
5
GND
Black
6
LED-
Brown
7
LED+
Yellow
Wires: UL/CSA approved (22AWG/300V)
Safe Operating Area
500mA
350mA
36
Vin 8V up to Vout = 17V
Vin 9V up to Vout = 20V
Vin 12V up to Vout = 24V
Vin 16V up to Vout = 32V
24
Available Operating Area
Input Voltage (V)
500mA
Input Voltage (V)
24
36
16
9
8
10
20
30
350mA
16
Vin 8V up to Vout = 25V
Vin 9V up to Vout = 27V
Vin 12V up to Vout = 36V
9
8
40
Output Voltage (V)
www.recom-power.com
Available Operating Area
10
20
30
40
Output Voltage (V)
REV: 4/2022
L-17
! NOT RECOMMENDED FOR NEW DESIGNS !
RBD-12
Series
LIGHTLINE
DC/DC-Converter
Standard Application
EN55022
EN55015
Class A without external filter
without filter
EN55022
Class B with filter:
Vin
L1 WE-744774127
C1
4u7F
27uH
C2
MLCC
L2 WE-744206
1uF
MLCC
60uH
1uF
MLCC
C3
RBD-12 Series
60uH
Single String Application
PWM Dimming Controlled
Vin
First
LED
RBD-12-x.xx
GND
Vref
Analogue
PWM ON/OFF
PWM
Low
Max
Last
LED
ON
ON
High
LED+
OFF
ON
OFF
OFF
200Hz
Io
0
LED-
Solar Lighting Application
Solar Panel
Sunlight
RBD-12
RBD-12-0.35
_ +
RV Battery
Vin+
Vout+
VinPWM/ON/OFF
Vref
VoutAna.
DAY
NIGHT
7x LED
Converter ON/OFF
OFF
ON
ent
ent
ent
vem
vem
Mo
Mo
vem
Mo
IR Trigger
555
IR
Movement Low Power
Detector
LED Brightness
100%
25%
0%
Dimming Controlled by Analog Voltage
5.0
LED DIMMER for up to 10 white LEDs
Analog Voltage (V)
4.0
3.0
ON
2.0
1.5V
1.0
0
0.2V
0
Analog Vo
ltage
50
100
+Vin
RBD-12-x.xx
GND
Manual
Dimming
Control
Dim
22k W
Vref
1st LED
Last LED
Output Current (%)
Note:
It is not possible to parallel the drivers to increase the current.
The product information and specifications may be subject to changes even without prior written notice. The product has been designed for various applications; its suitability lies in the responsibility of each customer. The
products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized
use of RECOM products in such safety-critical applications.
L-18
REV: 4/2022
www.recom-power.com
很抱歉,暂时无法提供与“RBD-12-0.50/W”相匹配的价格&库存,您可以联系我们找货
免费人工找货