REC10-1205D/H3/M

Features Regulated Converters ● ● ● ● ● ● ● ● Description 10W in 2” x 1” Package 2kVDC and 3kVDC Isolation Options 2:1 or 4:1 Input Voltage Range Continuous Short Circuit Protection (power limiting) Synchronous Rectification on all Del outputs Full SMD internal design Remote Control Pin Efficiency to 87% The REC10-xxxxS_D/M -series offer single and dual regulated outputs in a 2”x1” package with 2kVDC or 3kVDC isolation options and are suitable for higher power industrial applications. Remote on/off control is standard. The converters can deliver 150% rated power for short periods of time to cope with applications with large capacitive loads or high start up currents. Selection Guide Part Number Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) REC10-xx3.3S/H*/M 9-18, 18-36, 36-75 3.3 2000 83-84 2200µF REC10-xx05S/H*/M 9-18, 18-36, 36-75 5 2000 86-87 2200µF REC10-xx12S/H*/M 9-18, 18-36, 36-75 12 833 85-86 2200µF REC10-xx15S/H*/M 9-18, 18-36, 36-75 15 667 85-86 2200µF REC10-xx05D/H*/M 9-18, 18-36, 36-75 ±5 ±1000 82-83 ±1000µF REC10-xx12D/H*/M 9-18, 18-36, 36-75 ±12 ±416 85-86 ±1000µF REC10-xx15D/H*/M 9-18, 18-36, 36-75 ±15 ±333 85-86 ±1000µF REC10-xx3.3SZ/H*/M 9-36, 18-75 3.3 2000 82 2200µF REC10-xx05SZ/H*/M 9-36, 18-75 5 2000 86 2200µF REC10-xx12SZ/H*/M 9-36, 18-75 12 833 85 2200µF REC10-xx15SZ/H*/M 9-36, 18-75 15 667 86 2200µF REC10-xx05DZ/H*/M 9-36, 18-75 ±5 ±1000 82 ±1000µF REC10-xx12DZ/H*/M 9-36, 18-75 ±12 ±416 85 ±1000µF REC10-xx15DZ/H*/M 9-36, 18-75 ±15 ±333 86 ±1000µF * Standard is /H2 for 2kVDC isolation, use /H3 for 3kVDC Isolation 2:1 xx = 9-18Vin = 12, xx = 18-36Vin = 24, xx = 36-75Vin = 48 Efficiency Max. Cap. (typ.) Load (%) ECONOLINE DC/DC-Converter with 3 year Warranty 10 Watt 2” x 1” Single & Dual Output RoHS 2011/65/EU 6/6 E-224736 EN-60950-1 Certified EN-60601-1 Certified UL-60950-1 Certified REC10/M 4:1 xx = 9-36Vin = 24, xx = 18-75Vin = 48 Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range 2:1 or 4:1 Input Filter PI Network Output Voltage Accuracy (the Output 3.3V is ±1.2% max.) ±1.0% max. Line Voltage Regulation ±0.3% max. Load Voltage Regulation Single ±0.5% max. (25% to 100% full load ) Dual ±1.2% max. Cross Regulation (100%: 25% to 100% full load ) Output Ripple and Noise (with 100n output capacitor and 20MHz BW) ±5% max. 100mVp-p max. Start-up time (Nom. Vin at 100% Load) 25ms typ. Operating Frequency (Full Load) 300kHz typ. Efficiency (Nom. Vin at 100% Load) see Selection Guide Minimum Load Input Surge Voltage (100ms max.) 0% 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC continued on next page E-166 **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. REV: 0/2015 Refer to Application Notes www.recom-power.com REC10-S_D/H*/M Series ECONOLINE DC/DC-Converter Specifications cont. (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Derating-Graph H2-Suffix (tested for 1 second) 2000VDC (rated for 1 minute) 1000VAC / 60Hz H3-Suffix (tested for 1 second) 3000VDC (rated for 1 minute) 1500VAC / 60Hz Under Voltage Lockout (2:1) 12V Input DC-DC on 8.3VDC, DC-DC off 7.9VDC 24V Input DC-DC on 17.4VDC, DC-DC off 16.7VDC 48V Input DC-DC on 35.7VDC, DC-DC off 34.3VDC Under Voltage Lockout (4:1) 24V Input DC-DC on 8.3VDC, DC-DC off 7.9VDC 48V Input DC-DC on 17.4VDC, DC-DC off 16.7VDC Isolation Capacitance 1200pF typ. Isolation Resistance 1 GΩ min. Overload Protection 150% typ. Short Circuit Protection Continuous, Auto Restart Operating Temperature Range 4:1 -40°C to +71°C (see Graph) (free air convection) 2:1 -40°C to +81°C (see Graph) Storage Temperature Range -55°C to +105°C Remote On/Off DC/DC ON Open or 3.5V