REC10-2415SRWZ/H2/A/M/X2

Features Regulated Converters Description ● ● ● ● ● ● ● ● ● 10W DIP24 Package 2KVDC and 3kVDC Isolation Options 2:1 and 4:1 Versions Continuous Short Circuit Protection (power limiting) Synchronous Rectification on 3.3, 5V outputs Full SMD internal design Through Hole or SMD Pinning Options Remote Control Pin Efficiency to 87% The REC10-xxxxSRW/DRW-series offer single and dual regulated outputs in a DIP24 package with 2kV or 3kV isolation options and are suitable for higher power industrial or medical applications. Remote on/off control is standard and SMD pinning is offered with the /SMD option. The converters can deliver 150% rated power for short periods of time to cope with applications with large capacitive loads or high start up currents. ECONOLINE DC/DC-Converter with 3 year Warranty 10 Watt DIP24 & SMD Single & Dual Output Selection Guide Part Number Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) REC10-xx3.3SRW/H*/A/M 9-18, 18-36, 36-75 3.3 2000 84-85 2200µF REC10-xx05SRW/H*/A/M 9-18, 18-36, 36-75 5 2000 86-87 2200µF REC10-xx12SRW/H*/A/M 9-18, 18-36, 36-75 12 833 85-86 470µF REC10-xx15SRW/H*/A/M 9-18, 18-36, 36-75 15 667 85-86 220µF REC10-xx05DRW/H*/A/M 9-18, 18-36, 36-75 ±5 ±1000 84 ±1000µF REC10-xx12DRW/H*/A/M 9-18, 18-36, 36-75 ±12 ±416 86 ±220µF REC10-xx15DRW/H*/A/M 9-18, 18-36, 36-75 ±15 ±333 86 ±100µF REC10-xx3.3SRWZ/H*/A/M 9-36, 18-75 3.3 2000 84 2200µF REC10-xx05SRWZ/H*/A/M 9-36, 18-75 5 2000 86 2200µF REC10-xx12SRWZ/H*/A/M 9-36, 18-75 12 833 85 470µF REC10-xx15SRWZ/H*/A/M 9-36, 18-75 15 667 85 220µF REC10-xx05DRWZ/H*/A/M 9-36, 18-75 ±5 ±1000 83 ±1000µF REC10-xx12DRWZ/H*/A/M 9-36, 18-75 ±12 ±416 85 ±220µF REC10-xx15DRWZ/H*/A/M 9-36, 18-75 ±15 ±333 85 ±100µF * Standard is /H2 for 2kVDC isolation, 2:1 use /H3 for 3kVDC Isolation (not SMD) xx = 9-18Vin = 12, * add suffix "/X2" for pinning options, see next page. xx = 18-36Vin = 24, * add suffix "/SMD" for SMD package, e.g. xx = 36-75Vin = 48 REC10-2405SRW/H2/A/M/SMD Efficiency Max. Cap. Load (%) RoHS 2011/65/EU 6/6 E224736 EN-60950-1 Certified EN-60601-1 Certified UL-60950-1 Certified REC10 4:1 xx = 9-36Vin = 24, xx = 18-75Vin = 48 Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range 2:1 & 4:1 Input Filter PI Network Output Voltage Accuracy ±1.5% max. Line Voltage Regulation (VL to VH at full load) ±0.5% max. Load Voltage Regulation Single ±0.5% max. (25% to 100% full load ) Dual ±1.2% max. Cross Regulation (100%: 25% to 100% full load ) Output Ripple and Noise (with 100n output capacitor and 20MHz BW) ±5% max. 100mVp-p max. Start-up time 300ms typ. Operating Frequency (Full Load) 400kHz typ. Efficiency at Full Load see Selection Guide Minimum Load 0% continued on next page www.recom-power.com **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. REV: 0/2015 Refer to Application Notes E-163 REC10-S_DRW(Z)/H*/A/M Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Surge Voltage (100ms max.) 12V Input 24V Input 48V Input H2-Suffix and SMD (tested for 1 second) (rated for 1 minute**) H3-Suffix (tested for 1 second) (rated for 1 minute**) Isolation Voltage (Ambient Temperature) 2:1 Converters Isolation Resistance 1 GΩ min. 80 Overload Protection 150% typ. 60 Continuous, Auto Restart -40°C to +71°C (see Graph) -40°C to +81°C (see Graph) Open or 3.5V