REC2.2-4809SRWH1AM

Features Regulated Converters ● ● ● ● ● ● ● ● ● 2.2W DIP Package 1kVDC, 2kVDC & 3kVDC Isolation Options Regulated Output Wide Input Range 2 : 1 and 4 : 1 UL94V-0 Package Material Continuous Short Circuit Protection Cost Effective 100% Burned In Efficiency to 84% ECONOLINE DC/DC-Converter REC2.2S_DRW(Z) /H* Series 2.2 Watt DIP24 & SMD Single & Dual Output Selection Guide Part Number DIP24 (SMD) REC2.2-xx3.3SRW/H* REC2.2-xx05SRW/H* REC2.2-xx09SRW/H* REC2.2-xx12SRW/H* REC2.2-xx15SRW/H* REC2.2-xx3.3DRW/H* REC2.2-xx05DRW/H* REC2.2-xx09DRW/H* REC2.2-xx12DRW/H* REC2.2-xx15DRW/H* REC2.2-xx3.3SRWZ/H* REC2.2-xx05SRWZ/H* REC2.2-xx09SRWZ/H* REC2.2-xx12SRWZ/H* REC2.2-xx15SRWZ/H* REC2.2-xx3.3DRWZ/H* REC2.2-xx05DRWZ/H* REC2.2-xx09DRWZ/H* REC2.2-xx12DRWZ/H* REC2.2-xx15DRWZ/H* 2:1 Input (REC2.2-S/DRW/H*) xx = 4.5-9Vin = 05 xx = 9-18Vin = 12 xx = 18-36Vin = 24 xx = 36-72Vin = 48 Input Voltage (VDC) 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 4.5 - 9, 9 - 18, 18 - 36, 36 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 9 - 36, 18 - 72 4:1 Input (REC2.2-S/DRWZ/H*) xx = 9-36Vin = 24 xx = 18-72Vin = 48 Output Max Cap. Output Voltage (VDC) 3.3 5 9 12 15 ±3.3 ±5 ±9 ±12 ±15 3.3 5 9 12 15 ±3.3 ±5 ±9 ±12 ±15 Load (µF) 1000 470 220 120 100 ±470 ±220 ±100 ±68 ±47 1000 470 220 120 100 ±470 ±220 ±100 ±68 ±47 Current (mA) 600 440 244 183 146 ±300 ±220 ±122 ±91 ±73 600 440 244 183 146 ±300 ±220 ±122 ±91 ±73 EN-60601-1 Certified (Suffix H3) UL-60950-1 Certified * use suffix /H1 for 1kVDC Isolation, /H2 for 2kVDC Isolation or /H3 for 3kVDC Isolation. * add suffix "/A", "/B" or "/C" for Pinning, see next page * add suffix "/M" for metal case * add suffix "/SMD" for SMD package e.g. REC2.2-2412SRW/H1/AM = / Pinout "A" with metal case Notes: If the options "/M" for metal case and "/SMD" for SMD pinout are combined the maximum allowed isolation voltage is 2kVDC because of the shorter distances between the pins and the metal-case so the only available SMD-option in metal-case is "/H2". DIP-24 through-hole case and SMD-plastic case are not affected and offer the full isolation barriers of 2kVDC for "/H2" option and 3kVDC for "/H3". The /H2 and /H3 Version is not available in B Pinning. 96 January-2007 www.recom-international.com ECONOLINE DC/DC-Converter Specifications (Core Operating Area) Input Voltage Range Output Voltage Accuracy Line Regulation (HL-LL) 2:1 Input types 4:1 Input types REC2.2-S_DRW(Z)/H* Series 2:1 & 4:1 ±1% max. ±0.2% max. ±0.2% max. ±0.5% max. 100 80 Derating-Graph (Ambient Temperature) Load Regulation (for output load current change from 20% to 100%) Output Ripple and Noise (0,1µF capacitor on output, 20MHz BW) 50mVp-p max. Switching Frequency at Full Load 2:1 Input types90kHz min. / 150kHz max. and nominal Input Voltage 4:1 Input types 120kHz min. / 180kHz max. Input Filter Efficiency at Full Load No Load Power Consumption Isolation Voltage Rated Working Voltage Isolation Voltage Rated Working Voltage Isolation Voltage Rated Working Voltage Isolation Capacitance Isolation Resistance Short Circuit Protection Operating Temperature Range (free air convection) Storage Temperature Range Relative Humidity Case Material Thermal Impedance Package Weight MTBF (+25°C) (+85°C) Natural convection using MIL-HDBK 217F using MIL-HDBK 217F H1 Types H2 Types H3 Types (tested for 1 second) (long term isolation) (tested for 1 second) (long term isolation) (tested for 1 second) (long term isolation) 2:1 Input types 4:1 Input types Pi Network 84% max. 200mW typ. 1000VDC min. see Application Notes 2000VDC min. see Application Notes 3000VDC min. see Application Notes 20pF min. / 60pF max. 40pF min. / 80pF max. 1 GΩ min. Continuous -40°C to +85°C (see Graph) -55°C to +125°C 95% RH Non-Conductive Plastic 20°C/W for metal case 12g Detailed Information see Application Notes chapter "MTBF" Output Power (%) 60 50 40 20 0 Safe Operating Area -40 0 50 100 85 105 150 Operating Temperature °C } 1102 x 103 hours 186 x 103 hours Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1 Package A 32.00 10.20 3.81 4.60 0.51 Pin Connections 15.24 Pin # 2 3 9 11 14 11 20.30 3rd angle projection Single –Vin –Vin NC NC +Vout – Vout +Vin +Vin Dual –Vin –Vin Com –Vout +Vout Com +Vin +Vin Recommended Footprint Details 1.00 ø+0.15/–0 23 9 Bottom View 23 22 16 14 Top View 16 22 2.54 23 2.54 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm www.recom-international.com January-2007 97 ECONOLINE DC/DC-Converter REC2.2-S_DRW(Z)/H* Series 20.30 10.20 3.81 Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1 Package B 32.00 3rd angle projection Pin Connections Pin # Single +Vin No Pin No Pin –Vout +Vout –Vin –Vin +Vout –Vout No Pin No Pin +Vin Dual +Vin –Vout Com Com + Vout –Vin –Vin +Vout Com Com –Vout +Vin /H1 Only 2.06 0.51 15.24 1 2 3 10 11 12 13 14 15 2.54 Top View Recommended Footprint Details 1.00 ø+0.15/–0 123 Bottom View 24 23 22 10 11 12 15 14 13 22 23 24 2.54 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm Package C 32.00 10.20 3.81 2.06 0.51 20.30 Pin Connections Pin # 15.24 1 2 10 Single +Vin +Vin NC NC –Vout + Vout NC –Vin –Vin Dual +Vin +Vin Com Com NC –Vout +Vout –Vin –Vin Recommended Footprint Details 1.00 ø+0.15/–0 11 12 13 15 23 24 12 Bottom View 24 23 10 11 12 15 13 Top View 2.54 2.54 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm Mechanical drawings of DIP24 SMD case 32.00 31.40 11.20 10.90 3.81 6.35 20.30 25.40 19.90 2.54 Recommended Footprint Details Pin area 0.1 x 0.50 12345 0.50 9 10 11 12 2.54 1.54 2.03 All unused pins are NC (No Connection). SMD pin connections follow standard package pinning. See Notes for restrictions on /H3 SMD versions. 23.40 Bottom View 24 23 22 21 20 16 15 14 13 26.67 24.64 1 Top View Tol.: ± 0.35 mm 11 x 2.54 27.94 length of plastic case is 31,8mm, length of metal case 32.0mm 98 January-2007 www.recom-international.com