REC30-1215S

• • • • • • • • Features Regulated Converters 6-Side Shielding External ON/OFF control 1.6kVDC Isolation UL/CSA/EN-60950-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to 90.5% Fixed Switching Frequency DC/DC Converter REC30 Description The REC30-xxxxS_D -series offer single and dual regulated outputs in a 2”x1.6” package with 1.6kVDC isolation and are suitable for higher power industrial applications. Remote on/off control is standard. The higher current outputs have raised output voltages to compensate for track losses as standard. The converter is fully certified to UL/EN/IEC safety standards. Selection Guide Part Number 30 Watt 2“ x 1.6“ Single and Dual Output Input Output Output Efficiency max. Capacitive Voltage Range Voltage Current typ. Load (1) [VDC] [VDC] [mA] [%] [µF] REC30-123.4S 9-18 3.4 6000 85 10000 REC30-125.1S 9-18 5.1 6000 87 6800 REC30-1212S 9-18 12 2500 89 1800 REC30-1215S 9-18 15 2000 88 1000 REC30-1212D 9-18 ±12 ±1250 87 ±800 REC30-1215D 9-18 ±15 ±1000 88 ±500 REC30-243.4S 18-36 3.4 6000 87 10000 REC30-245.1S 18-36 5.1 6000 89 6800 REC30-2412S 18-36 12 2500 90 1800 REC30-2415S 18-36 15 2000 89 1000 REC30-2412D 18-36 REC30-2415D 18-36 ±15 ±1000 89 REC30-483.4S 36-75 3.4 6000 87.5 10000 REC30-485.1S 36-75 5.1 6000 REC30-4812S 36-75 12 REC30-4815S 36-75 15 REC30-4812D 36-75 ±12 REC30-4815D 36-75 ±15 ±1000 90.5 ±12 ±1250 88 ±800 ±500 89.5 6800 2500 90 1800 2000 90.5 1000 ±1250 89 E224736 IEC/EN60950-1 Certified UL60950 Certified CSA C22.2 NO. 60950 Certified EN55022 Certified ±800 ±500 Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Model Numbering REC30-__ __ _ nom. Input Voltage Single or Dual Output Voltage Ordering Examples: REC30-4812S, Single Output, 36-75Vin and 12Vout REC30-2412D, Dual Output, 18-36Vin and ±12Vout www.recom-power.com REV.: 3/2017 ECO-1 REC30 DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage, full load and after warm up unless otherwise specified) BASIC CHARACTERISTICS Parameter Input Voltage Range Condition Min. nom. Vin= 12V nom. Vin= 24V nom. Vin= 48V 9VDC 18VDC 36VDC Typ. Max. 18VDC 36VDC 75VDC 10ms Start/up Time Under Voltage Lockout (UVLO) nom. Vin= 12V DC-DC ON DC-DC OFF 8.3VDC 7.9VDC nom. Vin= 24V DC-DC ON DC-DC OFF 17.4VDC 16.7VDC nom. Vin= 48V DC-DC ON DC-DC OFF 35.7VDC 34.3VDC Output Voltage Trimming see calculation below ±10% DC-DC ON DC-DC OFF Open or 3V