REC7.5-2409DRW/H2/A/M/SMD

● ● ● ● ● Features Regulated Converters ● ● ● ● ● 7.5W DIP24 Package 1KVDC, 2KVDC and 3kVDC Isolation Options Approved for Medical Applications (/H) UL and EN Safety Approvals Continuous Short Circuit Protection (power limiting) 5 Side Shielded Metal Case Full SMD design 2 Case Style Options Remote Pin Option Efficiency to 86 % Description The REC7.5-xxxxSRW/DRW-series offer single and dual regulated outputs in a DIP24 package with 1kV, 2kV or 3kV options and are suitable for higher power industrial or medical applications. Remote on/off control is possible with the /CTRL option and SMD pinning is offered with the /SMD option. The converters can deliver 140% rated power for short periods of time to cope with applications with large capacitive loads or high start up currents. ECONOLINE DC/DC-Converter with 3 year Warranty 7.5 Watt DIP24 & SMD Single & Dual Output Selection Guide Part Number Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency (%) Max Capacitive Load (1) REC7.5-xx3.3SRW/H*/A/M 9-18, 18-36, 36-72 3.3 1800 78 6800µF REC7.5-xx05SRW/H*/A/M 9-18, 18-36, 36-72 5 1500 79-82 6800µF REC7.5-xx09SRW/H*/A/M 9-18, 18-36, 36-72 9 833 81-84 6800µF REC7.5-xx12SRW/H*/A/M 9-18, 18-36, 36-72 12 625 82-85 6800µF REC7.5-xx15SRW/H*/A/M 9-18, 18-36, 36-72 15 500 83-86 6800µF REC7.5-xx05DRW/H*/A/M 9-18, 18-36, 36-72 ±5 ±750 79-82 ±2200µF REC7.5-xx09DRW/H*/A/M 9-18, 18-36, 36-72 ±9 ±417 81-84 ±2200µF REC7.5-xx12DRW/H*/A/M 9-18, 18-36, 36-72 ±12 ±312 82-85 ±2200µF REC7.5-xx15DRW/H*/A/M 9-18, 18-36, 36-72 ±15 ±250 83-86 ±2200µF 2:1 xx = 9-18Vin = 12, xx = 18-36Vin = 24, xx = 36-72Vin = 48 * add suffix /H1 for 1kVDC Isolation, /H2 for 2kVDC isolation or /H3 for 3kVDC Isolation (not available in H3/A/M/SMD combination) * add suffix “/SMD” for SMD package, e.g. REC7.5-2405DRW/H1/A/M/SMD * add suffix “/CTRL” for Remote Pin option * add suffix „-R“ for Tape and Reel Packaging (only for SMD type available) e.g. REC7.5-2405DRW/H1/A/M/SMD/CTRL-R no plastic case is available for REC7.5 80 80 60 0 4812 0% 20% 40% 60% Total Output current (%) 80% 100% 20 0 60 40 30 20 0 Safe Operating Area -40 0 50 85 100 150 71 Operating Temperature °C 2405D 40 Efficiency % Efficiency % 40 20 4815D 2409D 60 483.3 Derating-Graph Output Power (%) 4805 2412 REC 7.5 80 Efficiency / Load 100 EN-60950-1 Certified EN-60601-1 Certified UL-60950-1 Certified 100 Dual Efficiency / Load 100 E-358085 (Ambient Temperature) Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Single RoHS 2011/65/EU 6/6 2412D 0% 20% 40% 60% Total Output current (%) 80% 100% **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes www.recom-power.com REV: 0/2015 E-157 REC7.5-S_DRW/H*/A/M Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range 2:1 Output Voltage Accuracy ±2% max. Line Voltage Regulation 0.4% max. Load Voltage Regulation (25% to 100% full load ) 0.8% max. Minimum Load Output Ripple and Noise (at 20MHz BW) 10% (2) 100mVp-p max. 50mVp-p max. 3.3V output type 5, 9, 12 and 15V output types Operating Frequency (Full Load) 150kHz min. / 240kHz max. Input Filter PI Network Efficiency at Full Load see Selection Guide No Load Power Consumption Isolation Voltage H1-Suffix H2-Suffix H3-Suffix 300mW max. 1000VDC 500VAC / 60Hz 2000VDC 1000VAC / 60Hz 3000VDC 1500VAC / 60Hz (tested for 1 second) (rated for 1 minute**) (tested for 1 second) (rated for 1 minute**) (tested for 1 second) (rated for 1 minute**) Isolation Capacitance 50pFtyp. Isolation Resistance 1 GΩ min. Short Circuit Protection (Max temp. = 50°C during short circuit conditions) Continuous, Auto Restart Operating Temperature Range (free air convection) -40°C to +71°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Case Material Thermal Impedance Nickel Plated Metal with Non-Conductive Base 12°C/W Natural convection MTBF (+25°C) (+71°C) } 16g 15 pcs per Tube Certifications UL General Safety Report: E358085 EN General Safety EN Medical Safety Notes Note 1: Note 2: 800 x 103hours >200 x 103hours using MIL-HDBK 217F using MIL-HDBK 217F Detailed Information see Application Notes chapter "MTBF" Report: SPCLVD1212007 Report: MDD1205098-3 + RM1205098-3 IEC/EN 60601-1 3rd Edition; Medical Report + ISO14971 Risk Assessment UL 60950-1 1st Ed. C22.2 No. 60950-1-03 EN60950-1:2006 +A12:2011 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. The REC 7.5 series requires a minimum of 10% load on the output to maintain specified regulation. Operating under no-load conditions will not damage these devices; however, they may not meet all listed specifications. Typical Characteristics Overload Response 100 Vout (% nominal) REC 7.5 Package Weight Packing Quantity 75 50 25 0 0 50 100 120 140 160 180 200 % of Rated Load E-158 REV: 0/2015 www.recom-power.com REC7.5-S_DRW/H*/A/M Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 24 PIN DIP Package 20.30 32.00 Pin Connections DIP24 Pin # 10.50 1 3.8+0.5 /-0.25 15.24 0.51 4.60 Recommended Footprint Details 1.00 ø+0.15/–0 (1) 2 3 9 11 16 14 Single Dual CTRL/No Pin CTRL/No Pin 2 –Vin 3 –Vin –Vin –Vin 9 NC Com 11 NC –Vout 14 +Vout +Vout 16 – Vout Com 22 +Vin +Vin 23 +Vin +Vin Bottom View 23 22 2.54 XX.X ± 0.5 mm XX.XX ± 0.25 mm Top View 2.54 /H3/A/M/SMD combination is not allowed 24 PIN SMD Package 32.00 19.90 31.40 11.20 3.81 20.30 6.35 25.40 Recommended Footprint Details Pin area 0.1 x 0.50 2.54 0.50 1.54 2.03 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.67 Top View 24.64 24 23 22 21 20 16 15 14 13 1 Pin # Single Dual 1 CTRL/NC CTRL/NC 2 –Vin –Vin 3 –Vin –Vin 9 NC Com 11 NC –Vout 14 +Vout +Vout 16 – Vout Com 22 +Vin +Vin 23 +Vin +Vin 1,4,5,10,12 NC 13,15,20,21,24 NC REC 7.5 2.54 Pin Connections DIP24 SMD 10.90 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm 27.94 11 x 2.54 CTRL Option Vin+ ON = Open or 0V< Vctrl