RJZ-1515S/P

Features • 2W single and dual outputs in DIP14 • 3kVDC/1s or 4kVDC/1s isolation • Optional continuous short circuit protection • UL94V-0 package material • Efficiency up to 85% • Suitable for IGBT applications Unregulated Converters Description 3300 RJZ-xx05S 3.3, 5, 9, 12, 15, 24 5 400 78-85 1200 RJZ-xx09S (3,4) 3.3, 5, 9, 12, 15, 24 9 222 78-84 1200 RJZ-xx12S (3,4) 3.3, 5, 9, 12, 15, 24 12 166 80-85 680 RJZ-xx15S (3,4) 3.3, 5, 9, 12, 15, 24 15 133 82-85 680 RJZ-xx24S ±5 ±200 75-82 ±470 3.3, 5, 9, 12, 15, 24 ±9 ±111 75-80 ±470 RGZ-xx12D 3.3, 5, 9, 12, 15, 24 ±12 ±84 78-82 ±220 3.3, 5, 9, 12, 15, 24 ±15 ±66 80-84 ±220 RGZ-xx15D (3,4) RGZ-xx24D (3,4) RGZ-xx1509D (3,4) 3.3, 5, 9, 12, 15, 24 ±24 ±42 82-84 ±100 5, 12, 24 +15/-9 +67/-111 70-81 ±330 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1s without damage to the converter Model Numbering RJZ-__ __S Input Voltage Output Voltage RGZ-__ __D Input Voltage Output Voltage C O M CONVER T RoHS 2 + compliant M 10 from 10 PL U D IA N T PRO C O M CONVER y (8) T S 3.3, 5, 9, 12, 15, 24 RGZ-xx09D (3,4) R RGZ-xx05D (3,4) E ±1500 REACH compliant CO 220 75 S 80-85 ±303 R 83 ±3.3 E 24 3.3, 5, 9, 12, 15, 24 CO 3.3, 5, 9, 12, 15, 24 RGZ-xx3.3D (3,4) M TS 70-75 C 606 RE 3.3 TS 3.3, 5, 9, 12, 15, 24 (3,4) C Output Output Efficiency max. Capacitive Voltage Current typ. (1) Load(2) [VDC] [mA] [%] [µF] arrant RE nom. Input Voltage [VDC] RJZ-xx3.3S (3,4) (3,4) 2 Watt 3 DIP14 Single and Dual Output w Selection Guide (3,4) RJZ & RGZ YEA R The RJZ and RGZ series converters are available in DIP14 packages, so can be used for applications where component height is restricted. The wide selection of input voltage and output voltage options plus an I/O-Isolation of 3kVDC or 4kVDC as standard makes these converters suitable for many industrial, medical and IGBT applications. Part Number DC/DC Converter PL U D IA N T PRO E358085 IEC/EN60950-1 certified IEC/EN60601-1 certified Protection (3) Isolation Option (4) Single Protection (3) Isolation Option (4) Dual Notes: Note3: standard part is without continuous short circuit protection add suffix „/P“ for continuous short circuit protection Note4: add suffix “/H” for 4kVDC/1s isolation or add suffix “/HP” for continuous short circuit protection and 4kVDC/1s isolation Ordering Examples RJZ-1212S = 12V Input, 12V Output, Single RJZ-0505S/P = 5V Input, 5V Output, Single, continuous short circuit protection RGZ-0505D/HP = 5V Input, 5V Output, Dual, 4kVDC/1s isolation and continuous short circuit protection www.recom-power.com REV.: 2/2020 ECO-1 RJZ & RGZ DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% Minimum Load 0% Internal Operating Frequency 20kHz 20kHz RGZ-xx1509D Output Ripple and Noise 50kHz 45kHz 90kHz 20MHz BW 150mVp-p Efficiency vs. Load RJZ-xx09S 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RJZ-xx05S 60 50 40 30 50 40 30 20 20 0505 1205 2405 10 0 60 0 10 20 30 40 50 60 70 80 90 0509 1209 2409 10 0 100 0 10 20 30 Output Load [%] 50 60 70 80 90 100 RJZ-xx15S 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RJZ-xx12S 60 50 40 30 60 50 40 30 20 20 0512 1212 2412 10 0 40 Output Load [%] 0 10 20 30 40 50 60 70 80 90 0515 1215 2415 10 100 0 Output Load [%] 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] continued on next page www.recom-power.com REV.: 2/2020 ECO-2 RJZ & RGZ DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Efficiency vs. Load RGZ-xx12D 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RGZ-xx05D 60 50 40 30 50 40 30 20 20 0505 1205 2405 10 0 60 0 10 20 30 40 50 60 70 80 90 0512 1212 2412 10 0 100 0 10 20 Output Load [%] 30 40 50 60 70 80 90 100 Output Load [%] RGZ-xx15D 100 90 Efficiency [%] 80 70 60 50 40 30 20 0515 1215 2415 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Output Accuracy Line Regulation Load Regulation (5) Value ±5.0% max. low line to high line 10% to 100% load 3.3Vout 5Vout 9, 12, 15, 24 and +15/-9Vout ±1.2% of 1.0% Vin typ. 20.0% max. 15.0% max. 10.0% max. Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met continued on next page www.recom-power.com REV.: 2/2020 ECO-3 RJZ & RGZ DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Deviation vs. Load RJZ-xx05S 30 0505 1205 2405 25 0509 1209 2409 25 20 Deviation [%] 20 Deviation [%] RJZ-xx09S 30 15 10 15 10 5 5 0 0 -5 -5 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 Output Load [%] 0512 1212 2412 70 80 90 100 0515 1215 2415 25 20 Deviation [%] 20 Deviation [%] 60 RJZ-xx15S 30 25 15 10 15 10 5 5 0 0 -5 -5 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 Output Load [%] 40 50 60 70 80 90 100 Output Load [%] RGZ-xx05D 30 RGZ-xx12D 30 0505 1205 2405 25 0512 1212 2412 25 20 Deviation [%] 20 Deviation [%] 50 Output Load [%] RJZ-xx12S 30 40 15 10 15 10 5 5 0 0 -5 -5 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] continued on next page www.recom-power.com REV.: 2/2020 ECO-4 RJZ & RGZ DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Deviation vs. Load RGZ-xx15D 30 0515 1215 2415 25 Deviation [%] 20 15 10 5 0 -5 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] PROTECTIONS Parameter Type Short Circuit Protection (SCP) Isolation Voltage (6) Value without suffix with suffix “/P” I/P to O/P 1 second continuous without suffix tested for 1 second rated for 1 minute 3kVDC 1.5kVAC/60Hz with suffix “/H” tested for 1 second rated for 1 minute 4kVDC 2kVAC/60Hz 15GΩ min. Isolation Resistance Isolation Capacitance 120pF max. basic (IEC/EN60950-1) functional (IEC/EN60601-1) Insulation Grade Notes: Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note7: Refer to local safety regulations if input over-current protection is required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Operating Temperature Range Condition Value full load @ free air convection (see graph) -40°C to +90°C Maximum Case Temperature +110°C Temperature Coefficient Thermal Impedance ±0.02%/K 0.1m/s, horizontal 56.66K/W Operating Altitude Operating Humidity 2000m non-condensing 95% RH max. Pollution Degree MTBF PD2 RJZ +25°C +85°C 893 x 103 hours 208 x 103 hours RGZ +25°C +85°C 810 x 103 hours 151 x 103 hours according to MIL-HDBK-217F, G.B. continued on next page www.recom-power.com REV.: 2/2020 ECO-5 RJZ & RGZ DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Derating Graph (@ free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 95 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety SPCLVD1602031 Information Technology Equipment, General Requirements for Safety Medical electrical equipment Part 1: General requirements for basic safety and essential performance EAC E358085 (8) WD-SE-R-180676-A0 (9) RU-AT.49.09571 RoHS 2+ Standard IEC60950-1:2005, 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 UL60950-1, 2nd Edition, 2007 CAN/CSA C22.2 NO. 60950-1, 2nd Edition, 2007 IEC60601-1:2005 + A1:2012, 3rd Edition EN60601-1:2006 + A1:2013 + A12:2014 TP TC 004/2011 RoHS-2011/65/EU + AM-2015/863 Notes: Note8: only +15/-9 version Note9: excluded +15/-9 version DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting PCB non-conductive black plastic (UL94 V-0) epoxy, (UL94 V-0) FR4, (UL94 V-0) Dimension (LxWxH) 19.9 x 10.0 x 7.1mm Weight 2.8g typ. continued on next page www.recom-power.com REV.: 2/2020 ECO-6 RJZ & RGZ DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) embossed logo Pin # 1 7 8 9 10 14 0.25±0.05 3.25 0.51+0.10/-0.05 Pinning Information 10.0 7.1 19.9 Recommended Footprint Details 1 7 1 10 9 8 7.62 tc 2.5 14 14 Bottom View 6.3 2.0 2.54 Ø1.0+0.15/-0 4x2.54=10.16 Top View RJZ -Vin NC +Vout no pin -Vout +Vin RGZ -Vin NC +Vout Com -Vout +Vin NC= No Connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 10 9 8 7 2.54 INSTALLATION AND APPLICATION IGBT Application Circuit + Q1 C Signal+ IC1 IN Signal- DC -Vin -Vin G E C2 DC C1 +Vin R1 +Vout IC2 +Vin OUT IGBT Driver -Vout C3 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 520.0 x 17.0 x 10.0mm Packaging Quantity tube 24pcs Storage Temperature Range Storage Humidity -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2020 ECO-7