RKE-0505S/H

Features • Low cost • 1:1 Input voltage range DC/DC Converter • Efficiency up to 81% Unregulated Converters • 4kVDC/1 second isolation RKE/H • IEC/EN/UL certified Description The RKE/H DC/DC converters are typically used in cost sensitive general purpose power isolation and voltage matching applications. Despite their low cost, they are fully specified converters with 4kVdc isolation, industrial operating temperature range of -40°C to +85°C without derating and UL/EN certifications. 1 Watt SIP7 Single Output Selection Guide Part Number Input Output Output Efficiency max. Capacitive Voltage Voltage Current typ.(1) Load(2) [VDC] [VDC] [mA] [%] [µF] RKE-0505S/H 5 5 200 75 1000 RKE-1205S/H 12 5 200 80 1000 RKE-2405S/H 24 5 200 81 1000 Notes: Note1: Values at nominal input voltage and full load Note2: Test by minimum Vin and constant resistor load E358085 Model Numbering RKE-__ __ S/H UL60950-1 certified CSA/CAN 22.2 No. 60950-1 certified IEC/EN60950-1 certified EN55032 compliant Input Voltage Output Voltage Ordering Examples: RKE-0505S/H, 5Vin and 5Vout, Single Output RKE-2405S/H, 24Vin and 5Vout, Single Output Specifications (measured at Ta= 25°C, nominal input voltage, full load, otherwise noted) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Filter Input Voltage Range -10% +10% 80kHz Operating Frequency Minimum Load Output Ripple and Noise Max. internal capacitors 0% measured with 20MHz bandwidth and a 0.1µF ceramic capacitor 40mVp-p 100mVp-p continued on next page www.recom-power.com REV.: 2/2018 ECO-1 RKE/H DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage, full load, otherwise noted) Efficiency vs. Load 100 90 Efficiency [%] 80 70 60 50 40 30 0505 1205 2405 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Values Output Voltage Accuracy ±5% typ. Line Voltage Regulation low line to high line Vin= 5V 10% to 100% load Vin = 12V Vin = 24V Load Voltage Regulation ±1.2% typ. /1% of Vin 8% typ., 15% max 3% typ., 15% max 4% typ., 15% max Tolerance Envelope Vin = 5V Vin = 12V/24V +15% +15% Vnom typical load lin +5% e Output Voltage Output Voltage +8% -2% -5% 10 50 typical +4% Vnom +5% load lin e -2% -5% 10 100 50 100 Load [%] Load [%] Accuracy vs. Load 30 0505 1205 2405 25 Deviation [%] 20 15 10 5 0 -5 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] www.recom-power.com REV.: 2/2018 ECO-2 RKE/H DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage, full load, otherwise noted) PROTECTIONS Parameter Condition Isolation Voltage (3) Value tested for 1 second tested for 1 minute I/P to O/P 4kVDC 3kVDC Isolation Capacitance 75pF max. Isolation Resistance 1GΩ min. Notes: Note3: For repeat Hi-Pot testing, reduce the time and/or the test voltage ENVIRONMENTAL Parameter Condition Value Operating Temperature Range with derating -40°C to +85°C non-condensing 5% to 95% RH Maximum Case Temperature +105°C Operating Humidity Vibration MIL-STD-202G MTBF according to MIL-HDBK-217F, G.B. +25°C +85°C 13200 x 10³hrs 5200 x 103hrs Derating Graph 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 85 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type IEC/EN General Safety UL General Safety CAN/CSA General Safety EAC Report / File Number LVD1602031 E358085-A4 RU-AT.49.09571 Electromagnetic compatibility of multimedia equipment - Emission requirements UL60950-1, 2nd Edition, 2007 CSA C22.2 No. 60950-1, 2nd Edition, 2007 TP TC 004/2011 2011/65/EU RoHs 2 EMC Compliance Standard IEC/EN60950-1, 2nd Edition, 2013 Condition with external filter Standard / Criterion EN55032, Class B continued on next page www.recom-power.com REV.: 2/2018 ECO-3 RKE/H DC/DC Converter Series Specifications (measured at Ta= 25°C, nominal input voltage, full load, otherwise noted) EMC Filtering Suggestion according to EN55032 Class B 470pF/5kVDC L1 +Vin +Vout MODEL C1 -Vin C1 L1 RKE-0505S/H 10µF 4.7µH choke RKE-1205S/H 4.7µF 22µH choke RKE-2405S/H 2.2µF 47µH choke -Vout DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting black plastic (UL94 V-0) epoxy (UL94 V-0) Package Dimension (LxWxH) 19.65 x 7.05 x 10.2mm Package Weight 2.7g typ. Dimension Drawing (mm) embossed logo 7.05 RKE-xxyyS/H RKE-xxyyS/H 0.51 Marking 0.51 4.10 10.2 19.65 0.25 1 2 Bottom View 1.27 2.54 Ø1.00 +0.15/-0 Top View 7 Pin Connections Pin # function 1 +Vin 2 -Vin 5 -Vout 7 +Vout Tolerance: xx.x= xx.xx= Pin dimension: Pin pitch: 2.0 6 x 2.54= 15.24 5 2.54 ±0.5mm ±0.35mm ±0.05mm ±0.25mm PACKAGING INFORMATION Packaging Dimension (LxWxH) Tube Packaging Quantity 520 x 9.3 x 16.5mm 25pcs Storage Temperature Range -55°C to +125°C The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2018 ECO-4