ROL-0505S/H

Features • Industry standard pinout • 1kVDC/1s or 2kVDC/1s basic isolation • UL94V-0 package material • Optional continuous short circuit protection • Fully encapsulated • Efficiency up to 87% Unregulated Converters Description The ROL DC/DC converters are typically used in general purpose low power isolation and voltage matching applications, and feature a full industrial operating temperature range of -40°C to +85°C without derating. DC/DC Converter ROL 0.5 Watt SIP4 Single Output Selection Guide Part Number nom. Input Voltage [VDC] Output Output Efficiency max. Capacitive Voltage Current typ. (1) Load (2) [VDC] [mA] [%] [µF] ROL-xx05S (3,4) 5, 12 5 100 78-82 470 5, 12 12 42 80-86 150 ROL-xx15S (3,4) 5, 12 15 33 80-87 150 ROL-xx12S (3,4) Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1 s without damage to the converter Model Numbering E358085 ROL- __ __S/_ Input Voltage Output Voltage Protection (3) Isolation Option (4) Single UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-03 certified IEC60950-1 certified EN60950-1 certified Notes: Note3: standard part is without continuous short circuit protection add suffix „/P“ for continuous short circuit protection Note4: add suffix „/H“ for 2kVDC isolation or add suffix „/HP“ for continuous short circuit protection and 2kVDC isolation Ordering Examples: ROL-1205S/P: 12V Input Voltage, 5V Output Voltage, Single Output with continuous short circuit protection ROL-0505S/HP: 5V Input Voltage, 5V Output Voltage, Single Output with 2kVDC Isolation and continuous short circuit protection www.recom-power.com REV.: 1/2018 ECO-1 ROL DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% 0% Minimum Load (5) Internal Operating Frequency 20kHz Output Ripple and Noise 54kHz 20MHz BW 100mVp-p Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met ROL-0505S ROL-0515S 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] Efficiency vs. Load 60 50 40 60 50 40 30 30 20 20 10 10 0 0 10 20 30 40 50 60 70 80 90 0 100 0 10 20 30 Output Load [%] 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy ±5.0% max. Line Regulation low line to high line ±1.2% of 1.0% Vin typ. Load Regulation 10% to 100% load 4.0% typ. / 10.0% max. Deviation vs. Load ROL-0505S 20 20 15 15 10 5 10 5 0 0 -5 -5 -10 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] www.recom-power.com ROL-0515S 25 Deviation [%] Deviation [%] 25 -10 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REV.: 1/2018 ECO-2 ROL DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm up unless otherwise stated) PROTECTIONS Parameter Type Value without suffix with suffix “/P” Short Circuit Protection (SCP) Isolation Voltage (6) I/P to O/P 1 second continuous without suffix tested for 1 second rated for 1 minute 1kVDC 500VAC/60Hz with suffix “/H” tested for 1 second rated for 1 minute 2kVDC 1kVAC/60Hz 10GΩ min. Isolation Resistance Isolation Capacitance 20pF min. / 75pF max. Insulation Grade basic Notes: Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note7: Refer to local wiring regulations if input over-current protection is also required. Recommended fuse: T0.5A slow blow type ENVIRONMENTAL Parameter Condition Operating Temperature Range Value full load @ free air convection (see graph) Operating Altitude -40°C to +85°C 2000m Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 MTBF according to MIL-HDBK-217F, G.B. +25°C +85°C 958 x 10 hours 200 x 103 hours 3 Derating Graph (@ free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 85 Ambient Temperature [°C] www.recom-power.com REV.: 1/2018 ECO-3 ROL DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety 1602031 Information Technology Equipment, General Requirements for Safety E358085-A4-UL EAC RU-AT.49.09571 RoHs 2+ Standard IEC60950-1:2005, 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 UL60950-1, 2nd Edition:2007 CAN/CSA C22.2 No. 60950-1-03, 2nd Edition:2007 TP TC 004/2011 RoHS-2011/65/EU + AM-2015/863 DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting PCB non-conductive black plastic (UL94 V-0) epoxy, (UL94 V-0) FR4, (UL94 V-0) Dimension (LxWxH) 11.5 x 6.0 x 10.0mm Weight 1.4g typ. Dimension Drawing (mm) embossed logo 11.5 6.0 0.51+0.10/-0.05 1 2 3 4 Bottom View 2.54 7.62 Recommended Footprint Details 2.54 Pin # 1 2 3 4 Single -Vin +Vin -Vout +Vout Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm Top View 1 2 3 4 1.25 1.90 0.25±0.05 4.10 0.51 10.0 Pinning information Marking PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 520.0 x 16.0 x 9.0mm Packaging Quantity tube Storage Temperature Range 42pcs -55°C to + 125°C Storage Humidity 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2018 ECO-4