RP08-2412SAWSMD

Features Regulated Converters ● ● ● ● ● ● ● ● 4:1 Wide Input Voltage Range 8 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Five-Sided Shield No Derating to 74°C Standard DIP24 and SMD-Pinning Efficiency to 88% POWERLINE DC/DC-Converter Selection Guide 24V and 48V Wide Input Types Part Number DIP24 (SMD) RP08-243.3SAW** RP08-2405SAW** RP08-2412SAW** RP08-2415SAW** RP08-483.3SAW** RP08-4805SAW** RP08-4812SAW** RP08-4815SAW** RP08-2405DAW** RP08-2412DAW** RP08-2415DAW** RP08-4805DAW** RP08-4812DAW** RP08-4815DAW** Input Range VDC 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 9-36 9-36 9-36 18-75 18-75 18-75 Output Voltage VDC 3.3 5 12 15 3.3 5 12 15 ±5 ±12 ±15 ±5 ±12 ±15 Output Current mA 2400 1600 666 533 2400 1600 666 533 ±800 ±333 ±267 ±800 ±333 ±267 Input (4,5) Current mA 40/407 40/402 25/407 25/407 20/204 20/201 13/201 13/198 20/417 25/407 25/407 10/208 13/203 13/201 Efficiency(6) Capacitive(7) Load max. % 85 87 86 86 85 87 87 88 84 84 86 84 85 87 µF 1330 1330 288 200 1330 1330 288 200 ±900 ±133 ±90 ±900 ±133 ±90 RP08S_DAW Series 8 Watt DIP24 & SMD, Single & Dual Output UL-60950-1 Pending ** add Suffix SMD for SMD package Derating Graph (Ambient Temperature) RP08-4805SAW 125 100 75 Output Power (%) 50 25 0 -40 -25 -10 0 75Vin Natural Convection Nom Vin Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at 50 60 70 80 90 100 110 78 Ambient Temperature Range (°C) Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range Input Filter Input Surge Voltage (100 ms max.) Input Reflected Ripple (nominal Vin and full load) 24V nominal input 48V nominal input 24V Input 48V Input 9-36VDC 18-75VDC Pi Type 50VDC 100VDC 20mAp-p continued on next page 216 14-February-2007 www.recom-international.com POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 1) Remote OFF input current Output Power Output Voltage Accuracy (full Load and nominal Vin) Minimum Load Line Regulation (low line, high line at full load) Load Regulation (0% to 100% full load) Cross Regulation Dual Output (asymmetrical load 25%/100% full load) Ripple and Noise (20MHz bandwith) Temperature Coefficient Transient Response (25% load step change) Input Voltage Variation, dv/dt Over Load Protection (% of full load at nominal Vin) Overvoltage Protection (Single) Undervoltage Protection Short Circuit Protection Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Operating Frequency Operating Temperature Range 24V Input 48V Input Single Dual DC-DC ON DC-DC OFF Nominal input RP08-S_DAW Series 450ms typ. Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA 8W max. ±1% 0% ±0.2% ±0.5% ±1% ±5% 50mVp-p ±0.02%/°C max. 250µs complies with ETS300 132, part 4.4 5V/ms 150% typ Zener Diode Clamp DC-DC ON = 9VDC, DC-DC OFF = 8VDC DC-DC ON = 18VDC, DC-DC OFF = 16VDC Continuous, automatic recovery see „Selection Guide“ table In to Out and I/O to case 1600VDC min. 10 GΩ min. 1500pF max. 5, 12, 15, ±12, ±15V 3.3, ±5V with derating 300kHz typ. -40°C to +78°C -40°C to +74°C -40°C to +105°C +105°C -55°C to +125°C Natural convection 12°C/Watt Nickel-Coated copper Non-conductive black plastic Epoxy (UL94-V0) DIP SMD EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 18g 20g Class A Class A Perf. Critera B Perf. Critera A Perf. Critera B Perf. Critera B Perf. Critera A MIL-STD-810D 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH Bellcore-TR-NWT-000332 14-February-2007 2350 x 103 hours 217 Maximum Case Temperature Storage Temperature Range Thermal Impedance Case Material Base Material Potting Material Weight Conducted Emissions (see note 3) Radiated Emissions (see note 3) ESD Radiated Immunity Fast Transient Surge Conducted Immunity Thermal Shock Vibration Relative Humidity MTBF (see note 2) www.recom-international.com POWERLINE DC/DC-Converter Notes : 1. 2. 3. 4. 5. 6. 7. RP08-S_DAW Series The ON/OFF control pin voltage is referenced to negative input. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). Requires external filter to meet EN55022 Class A Typical value at nominal input voltage and no load. Maximum value at nominal input voltage and full load Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. Package Style and Pinning (mm) DIP24 Package Style 31.80 20.30 3rd angle projection 10.20 3.8 2 20.30 5.10 15.20 Pin Connections 2.54 0.25 x 0.50 Rectangular Pin 9 11 123 Bottom View 23 22 16 14 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin Pin Pitch Tolerance ±0.35 mm SMD Package Style 32.00 31.40 11.20 10.90 3.81 6.35 20.30 SMD Package Style Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 2.54 21.30 25.40 Pin Connections Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin area 0.1 x 0.50 12345 0.50 9 10 11 12 2.54 1.60 2.40 23.40 Bottom View 24 23 22 21 20 16 15 14 13 26.54 24.14 1 Top View Pin Pitch Tolerance ±0.35 mm 11 x 2.54 27.94 218 14-February-2007 www.recom-international.com