RP100-482533DS

POWERLINE - DC/DC-Converter H-Series, 100 Watt (Dual Isolated Outputs) Features ● ● ● ● ● Independently Regul. 5V & 3.3V, 5V & 2.5V, or 3.3V & 2.5V Outp. 36–75 VDC Input (48V Nominal) 100W Continuous Ouput Power Efficiency up to 84% (Typ.) Remote On/Off Control ● ● ● ● ● ● Built-in EMI Suppression Filter Fixed Operating Frequency Under-Voltage Lockout Over-Voltage Shutdown Short Circuit Protection 1500 VDC I/O Isolation Selection Guide 48V Input Types Part Number Output Voltage (VDC) RP100-483305DS RP100-482505DS V1 V2 V1 V2 RP100-482533DS V1 V2 5 3.3 5 2.5 3.3 2.5DC Output Max. (A) 1 0 1 0 1 0 Current Max. (A) 20 25 20 25 20 25 Output Voltage Tolerance ±1.0% ±1.5% ±1.0% ±1.5% ±1.0% ±1.5% Ripple & Noise (mVp-p) 100 100 100 100 100 100 Line Regulation ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% Load Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range Input/Output Isolation Continuous Output Power Base-Plate Temperature Output Voltage Adjustment Short Circuit Protection Under-Voltage Protection Over-Voltage Protection Transient Response Frequency of Operation Efficiency (at nominal input voltage, full load) Remote Shutdown Ripple and Noise (20MHz BW ) Line Regulation, HL-LL Load regulation (100% to 10% full load) Temperature Coefficient Transient Response Recovery Time (25% load step change) Transient Voltage Peak Deviation Switching Frequency Operating Temperature Range Temperature Coefficient (over operating temperature range) Case Temperature Case Material Dimensions www.recom-international.com August 2002 36-75VDC (48V nom.) 1500 VDC, I/O, 1 Min. 100W max. +100 max.: internal thermal shutdown circuit., automatic recovery Outputs V1 & V2 each adjustable by ±10% Automatic recovery Lockout activated at 34V–35.5V input, automatic recovery. With 2V-3V hysteresis (typ.) 5V output – shutdown at 6.5V, typ.; 3.3V output – shutdown at 3.9V typ.; 2.5V output – shutdown at 3.2V, typ. Reset at Vin = 0V 200%µ S recovery after half-load to full load step. Change to within 1% of the regulation hand with no more than 5% deviation 300kHz, fixed 84% typ. CMOS and open-collector TTL compatible: ON = 2.4V to Vin max.; Off = 0.8V or less See table above ±0.2% ±0.5% ±0.02%/ºC 500µ s 300mV, max. 300kHz, typ. -40ºC to +100ºC (base plate) ±0.02% 100°C Aluminium base plate 57.91 x 60.96 x 12.70 mm PO 73 POWERLINE - DC/DC-Converter H-Series, 100 Watt (Dual Isolated Outputs) Derating Graph 120 100 80 60 Output Power (%) 40 20 0 -25 25 50 75 85 Ambient Temperature °C 100 125 Natural Convection Cooling Package Style and Pinning (mm) Bottom View 5.08 5 1 6 35.56 60.96 50.80 3 15.24 8 9 4 10 2 7 25.40 10.16 40.64 48.26 57.91 Pin Connections Pin # 1 2 3 4 5 6 7 8 9 10 Function –Vin Case Remote ON/OFF +Vin V2 out V2 return V2 adjust. V1 out V1 return V1 adjust. Dia. 1 mm 1 mm 1 mm 1 mm 2 mm 2 mm 1 mm 2 mm 2 mm 1 mm 12.70 Pin Pitch Tolerance ±0.5 mm PO 74 August 2002 www.recom-international.com