Features
Regulated Converters
● ● ● ● ● ● ● ●
4:1 Wide Input Voltage Range 15 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Six-Sided Shield No Derating to 65°C Standard 2” x 1” Package and Pinning Efficiency to 86%
POWERLINE
DC/DC-Converter
RP15S_DFW Series
15 Watt 2” x 1” Single & Dual Output
Selection Guide 24V and 48V Wide Input Types
Part Number Input Range VDC 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 9-36 9-36 9-36 18-75 18-75 18-75 Output Voltage VDC 3.3 5 12 15 3.3 5 12 15 ±5 ±12 ±15 ±5 ±12 ±15 Output Current mA 4500 3000 1250 1000 4500 3000 1250 1000 ±1500 ±625 ±500 ±1500 ±625 ±500 Input (4,5) Current mA 60/773 60/777 75/771 75/762 30/422 30/381 40/385 40/381 85/801 100/771 100/762 45/400 50/385 50/381 Efficiency(6)Capacitive(7) Load max. % µF 84 86 85 86 84 86 85 86 82 85 86 82 85 86 14750 7200 1250 800 14750 7200 1250 800 ±3600 ±625 ±400 ±3600 ±625 ±400
RP15-243.3SFW RP15-2405SFW RP15-2412SFW RP15-2415SFW RP15-483.3SFW RP15-4805SFW RP15-4812SFW RP15-4815SFW RP15-2405DFW RP15-2412DFW RP15-2415DFW RP15-4805DFW RP15-4812DFW RP15-4815DFW
* add /P for CTRL function with Positive Logic (1=ON, 0=OFF) * add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Derating Graph (Ambient Temperature)
RP15-4805SFW
125 100 75 Output Power (%) 50 25 0 -40 -25 -10 0 75Vin
Natural Convection
Nom Vin
50 60 70 80 90 100 110 75 Ambient Temperature Range (°C)
244
November-2006
www.recom-international.com
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
RP15-S_DFW Series
24V nominal input 48V nominal input 9-36VDC 18-75VDC Pi Type 24V Input 48V Input 50VDC 100VDC 20mAp-p 20ms typ. DC-DC ON DC-DC OFF Nominal input Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA 15W max. ±1% 0% ±0.2% Single Dual ±0.5% ±1% ±5% 3.3, 5.0V 12, 15, ±5, ±12, ±15V 50mVp-p 75mVp-p ±0.02%/°C max. 250µs complies with ETS300 132, part 4.4 5V/ms 150% typ Zener Diode Clamp 24V Input 48V Input DC-DC ON = 9VDC, DC-DC OFF = 8VDC DC-DC ON = 18VDC, DC-DC OFF = 16VDC Continuous, automatic recovery see „Selection Guide“ table In to Out and I/O to case 1600VDC min. 10 GΩ min. 1500pF max. 400kHz typ. 5.1, 12, 15, ±12, ±15V 3.3, ±5V with derating -40°C to +75°C -40°C to +65°C -40°C to +105°C +105°C -55°C to +125°C Natural convection with Heatsink 12°C/Watt 10°C/Watt Nickel plated copper Non-conductive black plastic continued on next page
Input Filter Input Surge Voltage (100 ms max.)
Input Reflected Ripple (nominal Vin and full load) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (Optional. See note 1) Remote OFF input current Output Power Output Voltage Accuracy (full Load and nominal Vin) Minimum Load Line Regulation (low line, high line at full load) Load Regulation (0% to 100% full load)
Cross Regulation Dual Output (asymmetrical load 25%/100% full load) Ripple and Noise (20MHz bandwith) (measured with a 104pF ceramic across the output) Temperature Coefficient Transient Response (25% load step change) Input Voltage Variation, dv/dt Over Load Protection (% of full load at nominal Vin) Overvoltage Protection (Single) Undervoltage Protection Short Circuit Protection Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Operating Frequency Operating Temperature Range
Maximum Case Temperature Storage Temperature Range Thermal Impedance (see note 8) Case Material Base Material
www.recom-international.com
November-2006
245
POWERLINE
DC/DC-Converter
Specifications, cont. (typical at nominal input and 25°C unless otherwise noted)
Potting Material Weight Conducted Emissions (see note 3) Radiated Emissions (see note 3) ESD Radiated Immunity Fast Transient Surge Conducted Immunity Thermal Shock Vibration Relative Humidity MTBF (see note 2) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6
RP15-S_DFW Series
Epoxy (UL94-V0) 27g Class A Class A Perf. Critera B Perf. Critera A Perf. Critera B Perf. Critera B Perf. Critera A MIL-STD-810D 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH Bellcore-TR-NWT-000332 2350 x 103 hours
Notes :
1. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SFW/P) Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SFW/N). If no suffix is specified, the control pin will be omitted. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Requires external filter to meet EN55022 Class A 4. Typical value at nominal input voltage and no load. 5. Maximum value at nominal input voltage and full load 6. Typical value at nominal input voltage and full load. 7. Test by minimum Vin and constant resistor load. 8. Optional Heatsink Part Number 7G-0020A
Package Style and Pinning (mm)
DIP24 Package Style
3rd angle projection
50.80
25.40 10.20
dia. 1.0 15.20 20.30
5.6 2.50 5.10
3 1 2 6
Pin Connections
Bottom View
10.20
4
10.20
5
12.70
Pin # Single 1 +Vin 2 -Vin 3 +Vout 4 No Pin 5 -Vout 6* CTRL* * Optional. See Note 1.
Dual +Vin -Vin +Vout Com -Vout CTRL*
Pin Pitch Tolerance ±0.35 mm
246
November-2006
www.recom-international.com
很抱歉,暂时无法提供与“RP15-2405DFWN”相匹配的价格&库存,您可以联系我们找货
免费人工找货