RP60-1212SE

POWERLINE - DC/DC-Converter E-Series, 60 Watt, 1.6 kV Isolation & Wide Input Range (Single & Dual Output) Features ● ● ● ● ● 2:1 Input Range Efficiency up to 90% Low Profile Case, 19 mm ON/OFF Control Over-Voltage Protection ● ● ● ● ● Six-Sided Shield Pi Input Filter Including 3.3/5.0VDC Output MTBF 1.250 x 105 Hours 2 Year Warranty Selection Guide 12V, 24V and 48V Input Types Part Number Input Range (VDC) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 36-75 36-75 36-75 Output Voltage (VDC) 3.3 5 12 15 ±5 ±12 ±15 3.3 / 5 3.3 5 12 +15 ±5 ±12 ±15 3.3 / 5 3.3 5 12 15 ±5 ±12 ±15 3.3 / 5.0 Output Current (A) 15 12 5 4 +10 / -2 ±2.5 ±2.0 6/6 15 12 5 4 +10 / -2 ±2.5 ±2.0 6/6 15 12 5 4 +10 / -2 ±2.5 ±2.0 6 A/6 Efficiency (%) 78 81 82 82 81 82 82 78 79 83 84 84 83 87 87 80 80 84 89 89 84 89 89 81 RP60-1233SE RP60-1205SE RP60-1212SE RP60-1215SE RP60-1205DE RP60-1212DE RP60-1215DE RP60-123305DE RP60-2433SE RP60-2405SE RP60-2412SE RP60-2415SE RP60-2405DE RP60-2412DE RP60-2415DE RP60-243305DE RP60-4833SE RP60-4805SE RP60-4812SE RP60-4815SE RP60-4805DE RP60-4812DE RP60-4815DE RP60-483305DE Specials RP60-485.5DEC 36-72 +5.5 /-5.4 +8 / -1.5 - Maximum Capacitive Load RP60-xx05SE RP60-xx12SE RP60-xx15SE RP60-xx33SE RP60-xx05DE RP60-xx12DE RP60-xx15DE RP60-xx3305DE 20400µF 3550µF 3300µF 38700µF 17000µF (+5V) 3400µF (-5V) 900µF 600µF 16000µF (+3.3V) 10200µF (+5V) August 2002 PO 71 www.recom-international.com POWERLINE - DC/DC-Converter E-Series, 60 Watt, 1.6 kV Isolation & Wide Input Range (Single & Dual Output) Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range See „Selection Guide“ table Input Filter Pi Type Reflected Ripple Current 75mA, p-p Voltage Accuracy, Single, Dual Output Models ±2.0%, max. Voltage Balance, Dual Output Models ±2%, max. Ripple & Noise, 20MHz BW 1% p-p of Vout Line Regulation: Single Output Models ±0.5%, max. Dual Output Models ±0.5%, max. Load Regulation (1/10 Load Full-Load) (xx3305DE) Models 3.3V Minimum Output Current 800mA) Single Output Models ±0.5%, max. Dual Output Models ±0.5%, max. Temperature Coefficient ±0.02%/°C Temp. Coefficient Balance ±1.0% Output Short Circuit Duration Continuous Short Circuit Protection. All outputs, by input Current limiting Output Short Circuit Duration Continuous Overvoltage Protection Threshold: 3.3V Output 3.9V 5.V Output 6.2V 12V Output 15V 15V Output 18V Control Voltage Referenced to Negative(-)Input Compatibility CMOS, TTL ON-Control 4.8V min. or Open OFF-Control 0.4V max. or Short Switching Frequency 200kHz, typ. Isolation Voltage 1600VDC, min Isolation Resistance 109 Ω Operating Temperature Range -25°C to +71°C Storage Temperature Range -55°C to +125°C Cooling Free-air Convection EMI/RFI Six-sided Continuos Shield Case Material Nickel-Coated Copper with Non-Conductive Base Dimensions 100 x 70 x 19 mm MTBF (MIL-HDBK-217F TA = 25°C full load) 1.250 x 105 Hours External Output Trimming Output may optionally be externally trimmed (± 10%) with a fixed resistor or an external trimpot as shown. 7 (7) Trim Up 4 Trim Down 6 for dual output ( ) for single output 6 7 for 3.3/5.0VDC 7 (7) 10 kΩ Trimpot 9 9 RT1 or RT2 4 120 100 80 60 Output Power (%) 40 20 0 75 50 71 35 Ambient Temperature °C -25 25 100 125 Natural Convection Cooling 590 LFM Package Style and Pinning (mm) 1.3 25.40 25.00 1 25.40 4 Pin Connections Pin # Single Dual 1 2 3 4 5 6 7 8 9 10 +Vin -Vin On/Off Trim +Vout +Vout Ground Ground N/P N/P +Vin -Vin On/Off Trim +Vout +Vout Ground Ground -Vout -Vout 10.00 5 25.40 10.00 6 10.00 7 10.00 2 Bottom View See Note 2 10.00 10.00 3 10.00 8 70.00 25.40 10.00 9 15.00 10.00 10.00 10 3.3 VDC / 5.0 VDC +Vin -Vin On/Off Trim +3.3 Vout +3.3 Vout Common Common +5.0 Vout +5.0 Vout 82.60 7.60 8.0 19 Note: Mounting inserts: 4 - 40 x 2.5 Deep Pin Pitch Tolerance ±0.5 mm PO 72 August 2002 www.recom-international.com