RPA100E-4812SW/N

DC/DC Converter RPA100E-W Description M C O N V ER T Part Number RPA100E-4805SW/N Input Voltage Range [VDC] 18-75 Nom. Output Voltage [VDC] 5 Output Current [A] 25 Efficiency typ. (1) [%] 91 RPA100E-4812SW/N 18-75 12 9 92 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient TS C PL D IA N T PRO U M CO NVE R T S M O REACH compliant CO 10 from 10 CO Selection Guide C R S RoHS 2 + compliant E O R C E RE The RPA100E-W is a low cost 100W DC/DC converter in industry standard 1/8th brick low profile format (58.4mm x 23mm x 11mm) and pinning. The 4:1 input range covers 24V, 28V, or 48V nominal input voltages, and the trimmable output voltage options are 5V or 12V. The efficiency is particularly high (typically 92%) to permit full load operation from -40°C up to +50°C ambient temperature with only free air convection and up to 85°C with forced air cooling. The isolation voltage is 1.5kVDC/1 minute (basic insulation grade). Applications include demanding industrial power supplies, telecom, and PoE circuits. 100 Watt Eighth Brick 3 Single Output M TS Regulated Converter Eighth brick format 4:1 input voltage range 1.5kV basic isolation Remote ON/OFF, sense, and trim pins UVLO, OTP, OVP, OCP and SCP 92% efficiency (typical) P C • • • • • • RE Features U LIA D N T PRO E224736 UL62368-1 - certified CAN/CSA-C22.2 No. 62368-1 - certified CISPR22 compliant Model Numbering RPA100 E- S W/N max. Output Power Control Logic (2) Single Eighth Brick (1/8) nom. Input Voltage nom. Output Voltage Notes: Note2: suffix “N” = negative CTRL function, refer to “ON/OFF CTRL” Ordering Examples: RPA100E-4805SW/N RPA100E-4812SW/N www.recom-power.com 18-75Vin, 18-75Vin, 5VDC Output, 12VDC Output, Single, Single, Negative control logic Negative control logic REV.: 0/2021 PD-1 RPA100E-W DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Input Voltage Range Condition Min. Typ. 48VDC nom VIN= 48VDC 18VDC Absolute Maximum Input Voltage continuous 0VDC Input Surge Voltage 100ms max. Under Voltage Lockout (UVLO) DC-DC ON DC-DC OFF hysteresis Input Current Max. 75VDC 80VDC 100VDC 17.9VDC 16.9VDC 1.8VDC 8.9A 7.7A 17.2VDC 16.2VDC 1VDC 16.5VDC 15.5VDC 0.3VDC VOUT= 5VDC VOUT= 12VDC VIN= 18VDC, full load Inrush Current 1A2s VIN= 48VDC, no load VOUT= 5VDC VOUT= 12VDC 55mA 60mA DC-DC OFF VOUT= 5VDC VOUT= 12VDC 5mA 12mA refer to “OUTPUT VOLTAGE TRIMMING” VOUT= 5VDC VOUT= 12VDC Quiescent Current Standby Current Output Voltage Trimming (3) -20% -10% Minimum Load +10% 0% Power up ON/OFF CTRL Start-up Time ON/OFF CTRL (4) 55ms 55ms -0.7VDC