RPM5.0-2.0-CT

Power Module Description RPM-2.0 2 Amp Single Output YEA R 3 arrant w The RPM-2.0 series is a 2A non-isolated switching regulator power module with a full set of features including adjustable output, sequencing, soft-start control, on/off control, and power good signals. The ultra-compact module has a profile of only 3.75mm, but with an efficiency of up to 98%, the device can operate at full load in ambient temperatures as high as +105°C without forced air cooling. The package is complete with 6-sided shielding for optimal EMC performance and excellent heat management. DC/DC Converter y • High power density (L*W*H = 12.19*12.19*3.75) • Wide operating temperature -40°C to +105°C at full load • Efficiency up to 98%, no need for heatsinks • 6-sided shielding • Thermally and EMI enhanced 25 pad LGA package • Compact DOSA-compatible footprint • Low profile Features Selection Guide T T REACH compliant M TS TS C PL U D IA N T PRO CONVER S 10 from 10 M CO CO M O R S RoHS 2 + compliant C C CONVER RE M E O R Notes: Note1: Refer to “Input Voltage Range” Note2: Max. Cap Load is tested at nominal input and full resistive load C E RE Part Input Voltage Output Vout Output Efficiency Max. Capacitive Number Range (1) Voltage Adjust Range Current max. typ. Load (2) [VDC] [VDC] [VDC] [A] [%] [µF] RPM3.3-2.0 3 - 17 3.3 0.9 - 6.0 2 90 - 98 800 RPM5.0-2.0 3 - 17 5 0.9 - 6.0 2 92 - 98 800 PL U D IA N T PRO EN55032 compliant Model Numbering RPM__-2.0-__ Packaging (3) Output Voltage max. Output Current Notes: Note3: add suffix “-CT” for tube packaging for more details refer to “PACKAGING INFORMATION” without suffix, standard tape and reel packaging Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Internal Input Filter Input Voltage Range Max. capacitor Buck mode 100% duty cycle mode (4) Vout= Vin - Vdrop 3.3Vout 5Vout 3.4VDC 5.1VDC 3.3Vout 5Vout 3VDC 12VDC 3.4VDC 5.1VDC 20VDC Absolute Maximum Input Voltage Undervoltage Lockout (UVLO) Input Current 2.6VDC 2.8VDC DC-DC ON DC-DC OFF nom. Vin= 12VDC 3.3Vout 5Vout 17VDC 2.7VDC 2.9VDC 2.8VDC 3.0VDC EVAL BOARD available 0.6A 0.9A 30µA Quiescent Current 3.3Vout 5Vout Internal Power Dissipation 0.7W 0.8W www.recom-power.com/eval-ref-boards continued on next page www.recom-power.com REV.: 7/2020 RPM-1 RPM-2.0 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Parameter Condition Output Voltage Trimming Min. Typ. Max. 0.9VDC (5) Minimum Dropout Voltage (Vdrop) (6) 6VDC 50mV/A Vin min. = Vdrop + Vout Minimum Load 0% without using soft start function/ power up using CTRL function Start-up Time 1.6ms 1.5ms Rise-time 1.4ms ON/OFF CTRL DC-DC ON DC-DC OFF Input Current of CTRL Pin DC-DC OFF Open or 0.9V