RPM60-4805SG/N

Features Regulated Converters • • • • • • Class B EMC Filter built-in Reverse Polarity Protected Inrush Current Limiting (Soft Start) Output Trim Potentiometer Output LED Indicator DIN Rail Mounting or Panel Mount Options DC/DC Converter Power Module Power Modules 15-60 Watt 3 Single, Dual & Triple Outputs 3Y wa Description The Recom Power Module takes a standard 15W-60W converter and mounts it on a PCB with screw terminals, an EMC filter, input protection circuitry and a built-in heatsink to offer a complete power module that can be mounted on a bulkhead or on a standard DIN rail. The Power Module is primarily designed for transport applications such as a GPS vehicle tracking power supply or a radio communications power supply, but will also find many uses in industrial, communications or battery-powered applications. EAR rranty How to use this datasheet: 1. Select the converter that suits your application from the converter series list below 2. Decide on DIN Mount (RPMD) or bulkhead (RPM) version Ordering example: 40W, 18-75 VDC in, single 12Vout, DIN Mount = RPMD40-4812SGW xx = Output Voltage Options Single Outputs: 3.3S = 3.3V 05S = 5V 12S = 12V 15S = 15V Dual Outputs: 12D = ±12V 15D = ±15V Refer to converter series datasheets for detailed information. Selection Guide Single and Dual Outputs - Panel Mount Version Power Module Input Output Internal Part Number Range Power Fuse (Bulkhead Version) [VDC] [W] (Replaceable) RPM15-24xxS_DFW( 1,2) 9.5-36 15 T6A RPM15-48xxS_DFW(1,2) 18-75 15 T4A RPM20-24xxS_DFW(1,2) 9.5-36 20 T6A RPM20-48xxS_DFW(1,2) 18-75 20 T4A RPM30-12xxS_DE(2) 9.5-18 30 T6A RPM30-24xxS_DE(2) 18-36 30 T6A RPM30-24xxS_DEW(1,2) 10-40 30 T6A RPM30-48xxS_DE(2) 36-75 30 T4A RPM30-48xxS_DEW(1,2) 18-75 30 T4A RPM40-12xxS_DG(2) 9.5-18 40 T8A RPM40-24xxS_DG(2) 18-36 40 T8A RPM40-24xxS_DGW(1,2) 9.5-36 40 T8A RPM40-48xxS_DG(2) 36-75 40 T4A RPM40-48xxS_DGW(1,2) 18-75 40 T4A RPM60-24xxSG(1,2) 18-36 60 T8A RPM60-48xxSG(1,2) 36-75 60 T4A Converter Series RP15-24xxS_DFW RP15-48xxS_DFW RP20-24xxS_DFW RP20-48xxS_DFW RP30-12xxS_DE RP30-24xxS_DE RP30-24xxS_DEW RP30-48xxS_DE RP30-48xxS_DEW RP40-12xxS_DG RP40-24xxS_DG IEC60950-1 Certified RP40-24xxS_DGW EN60950-1 Certified RP40-48xxS_DG RP40-48xxS_DGW RP60-24xxSG RP60-48xxSG Notes: Note1: add „/N“ for Negative CTRL Logic Note2: no suffix for Positive CTRL Logic www.recom-power.com REV.: 1/2016 PD-1 DC/DC Converter Selection Guide Single and Dual Outputs - DIN Rail Version Power Module Series Power Module Input Output Internal Part Number Range Power Fuse (DIN rail Version) [VDC] [W] (Replaceable) RPMD15-24xxS_DFW(1,2) 9.5-36 15 T6A RPMD15-48xxS_DFW(1,2) 18-75 15 T4A RPMD20-24xxS_DFW(1,2) 9.5-36 20 T6A RPMD20-48xxS_DFW(1,2) 18-75 20 T4A RPMD30-12xxS_DE(2) 9.5-18 30 T6A RPMD30-24xxS_DE(2) 18-36 30 T6A RPMD30-48xxS_DE(2) 36-75 30 T4A RPMD30-24xxS_DEW(1,2) 10-40 30 T6A RPMD30-48xxS_DEW(1,2) 18-75 30 T4A RPMD40-12xxS_DG(2) 9.5-18 40 T8A RPMD40-24xxS_DG(2) 18-36 40 T8A RPMD40-24xxS_DGW(1,2) 9.5-36 40 T8A RPMD40-48xxS_DG(2) 36-75 40 T4A RPMD40-48xxS_DGW(1,2) 18-75 40 T4A RPMD60-24xxSG(1,2) 18-36 60 T8A RPMD60-48xxSG(1,2) 36-75 60 T4A Converter Series RP15-24xxS_DFW RP15-48xxS_DFW RP20-24xxS_DFW RP20-48xxS_DFW RP30-12xxS_DE RP30-24xxS_DE RP30-48xxS_DE RP30-24xxS_DEW RP30-48xxS_DEW RP40-12xxS_DG RP40-24xxS_DG RP40-24xxS_DGW RP40-48xxS_DG RP40-48xxS_DGW RP60-24xxSG RP60-48xxSG Notes: Note1: add „/N“ for Negative CTRL Logic Note2: no suffix for Positive CTRL Logic Selection Guide Triple Outputs - Panel Mount Version Power Module Input Output Internal Part Number Range Power Fuse (Bulkhead Version) [VDC] [W] (Replaceable) RPM40-120512TG(2) 9.5-18 40 T8A RPM40-120515TG(2) 9.5-18 40 T8A RPM40-240512TG(2) 18-36 40 T8A RPM40-240515TG(2) 18-36 40 T8A RPM40-480512TG(2) 36-75 40 T4A RPM40-480515TG(2) 36-75 40 T4A Converter Series RP40-120512TG RP40-120515TG RP40-240512TG RP40-240515TG RP40-480512TG RP40-480515TG Notes: Note2: no suffix for Positive CTRL Logic Selection Guide Triple Outputs - DIN Rail Version Power Module Input Output Internal Part Number Range Power Fuse (Bulkhead Version) [VDC] [W] (Replaceable) RPMD40-120512TG(2) 9.5-18 40 T8A RPMD40-120515TG(2) 9.5-18 40 T8A RPMD40-240512TG(2) 18-36 40 T8A RPMD40-240515TG(2) 18-36 40 T8A RPMD40-480512TG(2) 36-75 40 T4A RPMD40-480515TG(2) 36-75 40 T4A Converter Series RP40-120512TG RP40-120515TG RP40-240512TG RP40-240515TG RP40-480512TG RP40-480515TG Notes: Note2: no suffix for Positive CTRL Logic PD-2 REV.: 1/2016 www.recom-power.com Power Module Series DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Specificatins are as in individual converter datasheets with the following exceptions: Bulkhead Version BASIC CHARACTERISTICS Parameter Condition Min. Inrush current nominal Vin and full load Start-up time Power up CTRL Pin Typ. Max. soft start 100ms 20ms ENVIRONMENTAL Parameter Condition Value Thermal Impedance 8.5°C/Watt SAFETY AND CERTIFICATIONS IEC General Safety EN General Safety IEC60950-1, 2nd Edition, 2005 + A1:2009 EN60950-1:2006 + A11:2009 +A1:2010; LVD20110124 EMC Compliance Condition Standard / Criterion EMI Standard EN55022, Class B ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Material Value Chassis Aluminium Package Dimensions (LxWxH) 101.6 x 57.15 x 19.0mm Package Weight 134g Connectors Screw Terminal 17.2 19.0 Panel Mount Version (mm) 57.15 Pin Connections TVS Pin # CMC 1 Heat-sink Plate 3.5 6.35 Fuse FET LED Trim(3) Single Dual +Vin +Vin 2 -Vin -Vin 3 CTRL CTRL 4 NC NC 5 -Vout -Vout 6 +Vout Com 7 NC +Vout NC: No Connection Tolerance: X.X ±0.25mm Mounting Centres 92.1 101.6 Notes: Note3: Trim option depending on converter series, please check datasheet of the converter series www.recom-power.com REV.: 1/2016 PD-3 Power Module Series DC/DC Converter Selection Guide typical at nominal input and 25°C unless otherwise noted Specificatins are as in individual converter datasheets with the following exceptions: PACKAGING INFORMATION Parameter Packaging Dimensions Type Value Cardboard Box 146 x 75 x 29mm Packaging Quantity 1pc DIN-Rail Version BASIC CHARACTERISTICS Parameter Condition Inrush current nominal Vin and full load Start-up time Power up CTRL Pin Min. Typ. Max. 15A 100ms 20ms ENVIRONMENTAL Parameter Condition Thermal Impedance Value 4.2°C/Watt SAFETY AND CERTIFICATIONS IEC General Safety EN General Safety EMC Compliance LVD20110124 Condition EMI Standard IEC60950-1, 2nd Edition, 2005 + A1:2009 EN60950-1:2006 + A11:2009 +A1:2010; Standard / Criterion EN55022, Class B ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Material Type Chassis Package Dimensions (LxWxH) Value Aluminium 125.0 x 57.6 x 24.5mm Package Weight 182g Connectors Screw Terminal continued on next page PD-4 REV.: 1/2016 www.recom-power.com Power Module Series DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted DIN Rail Version (mm) 125.0 116.3 5 6 7 8 LED 57.6 Trim(3) 1 2 3 4 24.5 Pin Connections Notes: Note3: Trim option depending on converter series, please check datasheet of the converter series Pin # Single Dual Triple 1 CTRL CTRL CTRL 2 -Vin -Vin -Vin 3 -Vin -Vin -Vin 4 +Vin +Vin +Vin 5 NC NC +Aux 6 -Vout -Vout Com 7 +Vout Com -Aux 8 NC +Vout +Vout NC: No Connection Tolerance: X.X ±0.5mm PACKAGING INFORMATION Parameter Packaging Dimensions Type Cardboard Box Packaging Quantity Value 146 x 75 x 29mm 1pc The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2016 PD-5