RPMB5.0-3.0-CT

Power Module Description RPMB-3.0 3 Amp Single Output YEA R 3 arrant w The RPMB-3.0 series is a 3A non-isolated SMD switching regulator power module with up to 36V input voltage. Despite its compact LGA footprint and low profile (12.2x12.2x3.75mm), it offers a full set of features including adjustable output from 1V up to 24V, on/off control, sense and power good output signals. With an efficiency of up to 94% which remains nearly constant over a 5% to 100% load range, the device can operate at ambient temperatures as high as +100°C without forced air cooling. The package is complete with 6-sided shielding for optimal EMC performance and excellent heat management. The fully protected module (UVLO, SCP, OCP, OTP) can drive high capacitive loads of up to 0.2F. DC/DC Converter y • 36V 3A SMD Power Module • High power density in 12.2x12.2x3.75mm case • -40°C to +100°C with derating, convection cooled • Efficiency up to 94% • 6-sided shielding • Thermally enhanced 25 pad LGA package (DOSA conform) Features T O M CONVER T S REACH compliant C TS compliant PL U D IA N T PRO CO CO 10 from 10 C M TS CONVER C M RoHS 2 + M Notes: Note1: Max. Capacitive Load is tested at nominal input, nominal output, and full resistive load, below 1 second start-up O RE C R Max Capacitive typ. Load (1) [µF] 200000 200000 15000 12000 E Efficiency typ. [%] 84 88 93 94 S Vout Output Adjust Range Current max. [VDC] [A] 1-9 3.0 1-9 3.0 9-24 3.0 9-24 3.0 R Output Voltage [VDC] 3.3 5 12 15 E RPMB3.3-3.0 RPMB5.0-3.0 RPMB12-3.0 RPMB15-3.0 Input Voltage Range [VDC] 4-36 5.5-36 12.8-36 16-36 RE Selection Guide Part Number PL U D IA N T PRO EN55032 compliant Model Numbering RPMB__-3.0-__ Packaging (2) Output Voltage max. Output Current Notes: Note2: Add suffix “-CT” for tube packaging; for more details refer to “PACKAGING INFORMATION“ without suffix, standard tape and reel packaging Specifications (@ Ta= 25°C, nom. Vin, full load, with input cap , after warm-up unless otherwise stated) (3) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Internal Input Filter Input Voltage Range (4) capacitor 4VDC 24VDC 5.5VDC 12.8VDC (nominal) 16VDC 3.3Vout 5.0Vout 12Vout 15Vout Absolute Maximum Input Voltage Input Current 36VDC 38VDC nom. Vin= 24VDC 0.5A 0.7A 1.6A 2A 3.3Vout 5.0Vout 12Vout 15Vout continued on next page www.recom-power.com Max. REV.: 1/2020 EVAL BOARD available www.recom-power.com/eval-ref-boards Notes: Note3: 4.7µF/50V/X7R input cap required RPMB-1 RPMB-3.0 DC/DC Converter Series Specifications (@ Ta= 25°C, nom. Vin= 24VDC, full load, with input cap Parameter , after warm-up unless otherwise stated) (3) Condition Quiescent Current Internal Power Dissipation Min. nom. Vin= 24VDC 3.3Vout 5.0Vout 12Vout 15Vout 30µA 36µA 70µA 140µA nom. Vin= 24VDC 3.3Vout 5.0Vout 12Vout 15Vout 1.9W 2W 2.7W 2.9W refer to “OUTPUT VOLTAGE TRIMMING“ Output Voltage Trimming Typ. Max. 3.3, 5.0Vout 1VDC 9VDC 12, 15Vout 9VDC 24VDC Minimum Load 0% power up using CTRL function Start-up Time 4.8ms 3.8ms Rise-time 900µs ON/OFF CTRL DC-DC ON DC-DC OFF Open or 1.26VDC