RS3-2415DZ

Features Regulated Converters • • • • • • • 2:1 and 3:1 wide input voltage ranges 1kVDC, 2kVDC and 3kVDC isolation UL94V-0 package material Continuous short circuit protection Low ripple and noise CTRL On/Off Efficiency up to 83% Description Very high power density, 2:1 or 3:1 input voltage range and a wide operating temperature range -40°C to +71°C and extra features such as On/Off control are just some of the characteristics of this converter which is ideal for highly sophisticated industrial designs. The RS3 is available with 2kV or 3kV isolation options (1kVDC is standard). DC/DC Converter RS3-S(D)(Z) 3 Watt SIP8 Single and Dual Output Selection Guide Part nom. Input Output Output Efficiency max. Capacitive Number Voltage Voltage Current typ. Load (1) [VDC] [VDC] [mA] [%] [µF] 4.5-9, 9-18 73-75 RS3-xx3.3S 3.3 600 4700 18-36, 36-72 77-78 4.5-9, 9-18 76-79 RS3-xx05S 5 600 4700 18-36, 36-72 80-81 4.5-9, 9-18 77-80 RS3-xx09S 9 333 3300 18-36, 36-72 81-82 4.5-9, 9-18 80-81 RS3-xx12S 12 250 2200 18-36, 36-72 83 4.5-9, 9-18 80-81 RS3-xx15S 15 200 2200 18-36, 36-72 83 4.5-9, 9-18 73-75 RS3-xx3.3D ±3.3 ±300 ±2200 18-36, 36-72 75 4.5-9, 9-18 76-80 RS3-xx05D ±5 ±300 ±2200 18-36, 36-72 80-81 4.5-9, 9-18 77-81 RS3-xx09D ±9 ±167 ±2200 18-36, 36-72 81 4.5-9, 9-18 78-83 RS3-xx12D ±12 ±125 ±1000 18-36, 36-72 83 4.5-9, 9-18 79-83 RS3-xx15D ±15 ±100 ±1000 18-36, 36-72 83 9-27 73 RS3-xx3.3SZ 3.3 600 4700 20-60 74 9-27 76-79 RS3-xx05SZ 5 600 4700 20-60 78 9-27 77 RS3-xx09SZ 9 333 3300 20-60 79 9-27 80 RS3-xx12SZ 12 250 2200 20-60 80 9-27 80 RS3-xx15SZ 15 200 2200 20-60 80 9-27 73 RS3-xx3.3DZ ±3.3 ±300 ±2200 20-60 74 9-27 77 RS3-xx05DZ ±5 ±300 ±2200 20-60 78 9-27 79 RS3-xx09DZ ±9 ±167 ±2200 20-60 79 9-27 80 RS3-xx12DZ ±12 ±125 ±1000 20-60 80 9-27 80 RS3-xx15DZ ±15 ±100 ±1000 20-60 80 E224736 UL60950-1 certified CAN/CSA C22.2 No. 60950-1-07 certified IEC/EN60950-1 certified IEC/EN60601-1 certified CB Report Notes: Note1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage on the converter www.recom-power.com REV.: 3/2019 ECO-1 RS3-S(D)(Z) DC/DC Converter Series Model Numbering RS3- / Isolation (2) nom. Input Voltage 2:1 or 3:1 Input (3) Output Voltage Single or Dual Notes: Note2: add „Z“ for 3:1 Input Voltage (24= 9-27VDC or 48= 20-60VDC) Note3: add suffix „/H2“ for 2kVDC isolation or „/H3“ for 3kVDC isolation, without suffix = standard 1kVDC isolation Ordering Examples: RS3-053.3S RS3-1212D/H2 RS3-2415D/H3 4.5-9Vin 9-18Vin 9-27Vin 3.3Vout ±12Vout ±15Vout Single Dual Dual 2:1 Input Voltage 2:1 Input Voltage 3:1 Input Voltage 1kVDC Isolation 2kVDC Isolation 3kVDC Isolation Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. 2:1 Input 5VDC 12VDC nom. Vin= 24VDC 48VDC 4.5VDC 9VDC 18VDC 36VDC 9VDC 18VDC 36VDC 72VDC 3:1 Input nom. Vin= 24VDC 48VDC 9VDC 20VDC 27VDC 60VDC Input Voltage Range 35mA 25mA 20mA 10mA 5VDC 12VDC nom. Vin= 24VDC 48VDC Quiescent Current Minimum Load (4) 10% open or high impedance external VCTRL= 5-12VDC + 1N4148 and 68W resistor DC-DC ON DC-DC OFF ON/OFF CTRL Internal Operating Frequency 200kHz 20% to 100% full load Output Ripple and Noise 20MHz BW 50mVp-p Notes: Note4: Operation below 10% load won‘t harm the converter, but specifications may not be met Efficiency vs. Load RS3-4805D 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RS3-0505S 60 50 40 60 50 40 30 30 20 20 10 10 0 0 10 20 30 40 50 60 70 80 90 100 0 Output Load [%] 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] continued on next page www.recom-power.com REV.: 3/2019 ECO-2 RS3-S(D)(Z) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) ON/OFF CTRL +Vin +Vin VCTRL 68Ω 1N4148 +Vout DC-DC ON: Open or high impedance DC-DC OFF: VCTRL= 5-12VDC + 1N4148 and 68W resistor CTRL -Vin +Vin VCTRL +Vout -Vin -Vout +Vin +Vout -Vout +Vout 10kΩ Q1 -Vin -Vin VCTRL 0 -Vout DC-DC ON DC-DC OFF -Vout REGULATIONS Parameter Condition Value Output Accuracy ±2.0% typ. Line Regulation low line to high line, full load Load Regulation 20% to 100% load ±0.5% max. 0.5% typ. PROTECTIONS Parameter Type Short Circuit Protection (SCP) Value below 100mW Isolation Voltage (5) continuous, auto recovery standard without suffix tested for 1 second rated for 1 minute 1kVDC 500VAC/60Hz /H2 version tested for 1 second rated for 1 minute 2kVDC 1kVAC/60Hz /H3 version tested for 1 second rated for 1 minute 3kVDC 1.5kVAC/60Hz 1GΩ min. Isolation Resistance standard version without suffix /H2 and /H3 version Isolation Capacitance 200pF max. 30pF max. functional (CB-IEC/EN60601-1) basic (CB-IEC/EN60950-1) Insulation Grade Protection Circuit +Vin -Vin F1 +Vin +Vout +Vout -Vin -Vout -Vout Notes: Note5: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note6: To protect the converter under all fault conditions, an input fuse is required. Quick-fuses should be rated at 2x-3x the nominal input current, time -delay fuses at 1.5x the nominal input current www.recom-power.com REV.: 3/2019 ECO-3 RS3-S(D)(Z) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) ENVIRONMENTAL Parameter Condition Operating Temperature Range Value full load @ free air convection (see graph) -40°C to +71°C Operating Altitude 5000m Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 MTBF according to MIL-HDBK-217F, G.B. 3303 x 103 hours 745 x 103 hours +25°C +71°C Derating Graph (@ Chamber and free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 71 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety (LVD) SPCLVD1605077-10 IEC60950-1, 2nd Edition, AM2: 2013 EN60950-1, 2nd Edition, A2:2013 Information Technology Equipment, General Requirements for Safety (CB) L0339L49-CB-1-B1 IEC60950-1:2005, 2nd Edition + A2:2013 UL60950-1, 2nd Edition, 2014 CAN/CSA C22.2 No. 60950-1-07 Information Technology Equipment, General Requirements for Safety E224736-A33-UL Medical Electric Equipment, General Requirements for Safety and Essential Performance WD-SE-R-180675-A0 IEC60601-1:2005 + C2:2007 + A1:2012, 3rd Edition EN60601-1:2006 + A1:2013 + A12:2014 EAC RU-AT.AB49.B.09571 TP TC 004/2011 RoHS2 EMC Compliance Electromagnetic compatibility of multimedia equipment - Emission requirements (7) RoHS 2011/65/EU + AM2015/863 Condition with external filter (see filter suggestion below) Standard / Criterion EN55032, Class A EN55032, Class B continued on next page www.recom-power.com REV.: 3/2019 ECO-4 RS3-S(D)(Z) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) EMC Filtering Suggestions according to EN55032 Component List Class A MODEL C3 L1 +Vin +Vin C1 C1 C2, C3 L1 10µF N/A 3.9µH choke RLS-397 RS3-0505S +Vout RS3-0512S +Vout RS3-243.3S C2 RS3-4805S -Vin -Vin -Vout Component List Class B -Vout MODEL Notes: Note8: Filter suggestions are valid for indicated part numbers only. For other part numbers, please contact RECOM tech support for advice. C1 RS3-0505S RS3-0512S RS3-243.3S RS3-4805S C2 C3 N/A N/A 10µF L1 5.6µH choke RLS-567 10µF 330pF DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting PCB non-conductive black plastic, (UL94V-0) epoxy, (UL94V-0) FR4, (UL94V-0) Dimension (LxWxH) 21.8 x 9.2 x 11.1mm Weight 4.7g typ. Dimension Drawing (mm) embossed logo 21.8 9.2 11.1 Pinning information 0.50 Marking 0.25±0.05 4.10 0.51+0.10/-0.05 Recommended Footprint Details 2.00 5 6 7 8 2.54 Bottom View 1 2 3 3.20 1.00 Ø +0.15/-0 1 2 3 5 6 7 8 Pin # 1 2 3 5 6 7 8 Single -Vin +Vin CTRL (8) NC +Vout -Vout NC (9) Dual -Vin +Vin CTRL (8) NC +Vout Com -Vout NC= No Connection Tolerances: xx.x ±0.5mm xx.xx ±0.25mm Top View 7x2.54= 17.78 2.54 Notes: Note8: Note9: This pin provides an Off function which puts the converter into a low power mode. When the pin is ‘high’ the converter is OFF and when the pin is open the converter is ON. There is no allowed low state for this pin. (refer to „ON/OFF CTRL“ on page 3) This pin is used internally. No external connection allowed www.recom-power.com REV.: 3/2019 ECO-5 RS3-S(D)(Z) DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 520.0 x 17.0 x 10.0mm Packaging Quantity tube 22pcs Storage Temperature Range Storage Humidity -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 3/2019 ECO-6