RV-3.305S/P

Features Unregulated Converters • UL/CSA/IEC/EN safety certified and CB report • 6kVDC/1s isolation • Optional continuous short circuit protection • Efficiency up to 82% • Space saving package • Very low isolation capacitance • Suitable for IGBT application Description RV 2 Watt 3 DIP24 miniature Single and Dual Output YEA R 70-75 1200 167 70-75 680 (3) RV-xx15S 3.3, 5, 12, 15, 24 15 132 75-80 680 RV-xx24S(3) 3.3, 5, 12, 15, 24 24 83 75-80 220 (3) RV-xx3.3D 3.3, 5, 12, 15, 24 ±3.3 ±300 70 ±1500 RV-xx05D(3) 3.3, 5, 12, 15, 24 ±5 ±200 70-75 ±470 RV-xx09D(3) 3.3, 5, 12, 15, 24 ±9 ±111 70-75 ±470 (3) RV-xx12D 3.3, 5, 12, 15, 24 ±12 ±85 70-75 ±220 RV-xx15D(3) 3.3, 5, 12, 15, 24 ±15 ±66 75-80 ±220 RV-xx24D(3) 3.3, 5, 12, 15, 24 ±24 ±42 75-80 ±100 RV-xx1509D 5, 12, 24 +15/-9 +67/-111 70-82 ±330 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load Model Numbering Input Voltage Output Voltage RV-__ __S C O M CONVER T RoHS 2 + 10 from 10 O M CONVER compliant PL U D IA N T PRO y T REACH compliant M C M TS 222 12 C 9 3.3, 5, 12, 15, 24 RE 3.3, 5, 12, 15, 24 RV-xx12S(3) S RV-xx09S(3) R 1200 E 3300 70-75 CO 70 400 S 600 5 R 3.3 3.3, 5, 12, 15, 24 E 3.3, 5, 12, 15, 24 RV-xx05S(3) CO RV-xx3.3S(3) TS Output Output Efficiency max. Capacitive Voltage Current typ. (1) Load(2) [VDC] [mA] [%] [µF] C nom. Input Voltage [VDC] RE Selection Guide arrant w Very high isolation in a small size are the main features of this miniature DIP24 converter, ideal for highly sophisticated industrial, test and measurement and medical designs where board space is at a premium. Part Number DC/DC Converter PL U D IA N T PRO E224736 UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified IEC/EN60950-1 certified UL62368-1 certified CAN/CSA-C22.2 No. 62368-1-14 certified IEC/EN62368-1 certified CB report “Protection (3)” Single or Dual Notes: Note3: standard part is without continuous short circuit protection add suffix „/P“ for continuous short circuit protection Ordering Examples RV-053.3S/P = 5V Input, 3.3V Output, Single, short circuit protection RV-1212D = 12V Input, 12V Output, Dual www.recom-power.com REV.: 2/2020 ECO-1 RV DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% Minimum Load 0% all others RV-XX1509D Internal Operating Frequency Output Ripple and Noise 20kHz 20kHz 50kHz 47kHz 85kHz 20MHz BW 200mVp-p Efficiency vs. Load RV-xx12S 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RV-xx05S 60 50 40 30 40 20 0505 1205 10 0 10 20 30 40 50 60 70 80 90 0 100 0 10 20 30 40 50 60 Output Load [%] Output Load [%] RV-xx05D RV-xx12D 100 100 90 90 80 80 70 70 60 50 40 30 70 80 90 100 60 50 40 30 20 20 0505 1205 10 0 0512 1212 10 Efficiency [%] Efficiency [%] 50 30 20 0 60 0 10 20 30 40 50 60 70 80 90 0512 1212 10 0 100 0 10 20 Output Load [%] 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Output Accuracy Line Regulation Load Regulation (4) Value ±5.0% typ. low line to high line 10% to 100% load 3.3Vout 5Vout 9, 12, 15, 24 and +15/-9Vout ±1.2% of 1.0% Vin typ. 20.0% max. 15.0% max. 10.0% max. continued on next page www.recom-power.com REV.: 2/2020 ECO-2 RV DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Notes: Note4: Operation below 10% load will not harm the converter, but specifications may not be met Tolerance Envelope 9, 12, 15, 24 and +15/-9Vout +10% Output Voltage [%] +6% Typica l +5% Load L ine Vnom -2.5% -5% 10 50 100 Output Load [%] Deviation vs. Load RV-xx05S 25 0505 1205 20 15 Deviation [%] Deviation [%] 0512 1212 20 15 10 5 10 5 0 0 -5 -5 -10 RV-xx12S 25 0 10 20 30 40 50 60 70 80 90 -10 100 0 10 20 30 Output Load [%] RV-xx05D 25 0505 1205 60 70 80 90 100 0512 1212 20 15 Deviation [%] 15 Deviation [%] 50 RV-xx12D 25 20 10 5 10 5 0 0 -5 -5 -10 40 Output Load [%] 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] www.recom-power.com -10 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REV.: 2/2020 ECO-3 RV DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PROTECTIONS Parameter Type Value without suffix with suffix “/P” Short Circuit Protection (SCP) Isolation Voltage (5) 1 second continuous tested for 1 second rated for 1 minute I/P to O/P 6kVDC 3kVAC/60Hz 15GΩ min. Isolation Resistance Isolation Capacitance 2pF min. / 12pF max. basic (IEC/EN60950-1, IEC/EN62368-1) functional (IEC/EN60601-1) Insulation Grade Notes: Note5: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note6: Refer to local safety regulations if input over-current protection is required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Condition Operating Temperature Range Value full load @ free air convection (see graph) Operating Altitude -40°C to +90°C 3000m Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 MTBF according to MIL-HDBK-217F, G.B. +25°C +85°C 1154 x 10 hours 168 x 103 hours 3 Derating Graph (@ free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 95 Ambient Temperature [°C] www.recom-power.com REV.: 2/2020 ECO-4 RV DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety E224736-A56-UL Information Technology Equipment, General Requirements for Safety (LVD) LVD1602031 Audio/Video, information and communication technology equipment Part1: Safety requirements E224736-A56-UL Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance WD-SE-R-180541-A0 Audio/Video, information and communication technology equipment Part1: Safety requirements Standard CAN/CSA-C22.2 No. 60950-1-07, 2nd Edtition, 2014 UL No. 60950-1, 2nd Edition, 2014 IEC60950-1:2005, 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 CAN/CSA-C22.2 No. 62368-1-14, 2nd Edition UL62368-1, 2nd Edition, 2014 IEC60601-1:2005 + A1:2012, 3rd Edition EN60601-1:2006 + A12:2014 EN62368-1:2014 + A11:2017 ATTCB106076 Audio/Video, information and communication technology equipment Part1: Safety requirements (CB Scheme) IEC62368-1:2014 2nd Edition EAC RU-AT.49.09571 RoHS 2 TP TC 004/2011 RoHS-2011/65/EU + AM-2015/863 DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting PCB non-conductive black plastic, (UL94 V-0) epoxy, (UL94 V-0) FR4, (UL94 V-0) Dimension (LxWxH) 32.35 x 14.7 x 11.1mm Weight 9.0g typ. Dimension Drawing (mm) embossed logo 14.7 32.35 Pinning Information 0.5±0.05 15.24 4.10 0.60 0.40 11.1 14.4 0.25±0.1 16.95 max. Recommended Footprint Details 1.00Ø +0.15/-0 8 9 10 11 12 Bottom View 24 23 2.2 www.recom-power.com 24 23 1 2 17 16 15 14 13 11x2.54= 27.94 17 16 15 14 13 Top View 2.54 1 2 8 9 10 11 12 Pin # 1 2 8, 17 9, 11, 14 10, 15 12, 13 16, 23, 24 Single +Vin -Vin NC NC -Vout +Vout NC Dual +Vin -Vin -Vout NC Com +Vout NC NC= No Connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 2.54 REV.: 2/2020 ECO-5 RV DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) INSTALLATION AND APPLICATION IGBT Application Circuit + Q1 C Signal+ IC1 IN Signal- DC -Vin -Vin G E C2 DC C1 +Vin R1 +Vout IC2 +Vin OUT IGBT Driver -Vout C3 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 530.0 x 21.0 x 18.0mm Packaging Quantity tube Storage Temperature Range Storage Humidity 15pcs -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2020 ECO-6