RW-1205S/SMD

Features • 1kVDC isolation • DIP24 low profile or SMD package style • UL94V-0 package material • Short circuit protected • IEC/EN60950-1 certified • Feedback regulated output Regulated Converters Description DC/DC Converter RW-S 3 Watt 3 DIP24 (low profile) or SMD Single Output YEA R Selection Guide y Input Output Output Efficiency max. Capacitive Voltage Range Voltage Current typ. (1) Load (2) [VDC] [VDC] [mA] [%] [µF] 9-18 5 600 73 4700 RW-1209S 9-18 9 333 78 3300 RW-1212S 9-18 12 250 79 2200 RW-1215S 9-18 15 200 79 2200 RW-243.3S 18-36 3.3 650 75 4700 RW-2405S 18-36 5 600 78 4700 RW-2409S 18-36 9 333 82 3300 RW-2412S 18-36 12 250 84 2200 RW-2415S 18-36 15 200 85 2200 RW-483.3S 36-72 3.3 650 73 4700 RW-4805S 36-72 5 600 78 4700 RW-4809S 36-72 9 333 82 3300 RW-4812S 36-72 12 250 84 2200 RW-4815S 36-72 15 200 85 2200 T RE RoHS 2 + 10 from 10 O M CONVER T REACH compliant M C compliant PL U D IA N T PRO M TS CONVER C RW-1205S M TS 9-18 3.3 650 70 4700 O C RW-123.3S C S 4.5-9 15 200 73 2200 R RW-0515S E 4.5-9 12 250 72 2200 CO 4.5-9 9 333 70 3300 RW-0512S S RW-0509S R 4.5-9 5 600 69 4700 E 4.5-9 3.3 650 68 4700 RW-0505S CO RW-053.3S RE Part Number arrant w The RW-S series with 2:1 input voltage ranges and max. height of 7.0 mm has been designed for the industrial automation markets. They are aimed at applications where pcb-space is at a premium so SMD pinning is also available. The converters supply the full 3 watts without additional heat-sinks over the temperature range -40°C to +80°C (3.3Vout excepted). PL U D IA N T PRO IEC/EN60950-1 certified EN55032 compliant Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load Model Numbering RW- __ __S /___ nom. Input Voltage Case Style (3) Output Voltage Notes: Note3: without suffix = standard DIP24 THT package, add suffix „/SMD“ for SMD package Ordering Examples: RW-2405S 18-36Vin Single 5Vout DIP24 RW-0512S/SMD 4.5-9Vin Single 12Vout SMD RW-48015S/SMD 36-72Vin Single 15Vout SMD www.recom-power.com REV.: 2/2020 ECO-1 RW-S DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Input Voltage Range Typ. Max. 9VDC 18VDC 36VDC 72VDC 4.5VDC 9VDC 18VDC 36VDC 5VDC 12VDC nom. Vin= 24VDC 48VDC No Load Power Consumption Minimum Load 250mW 10% (4) 85kHz Internal Operating Frequency Output Ripple and Noise (5) 100kHz 20MHz BW 70mVp-p Notes: Note4: Operation below 10% load won‘t harm the converter, but specifications may not be met. Note5: Measurements are made with a 0.1µF MLCC across output. (low ESR) Efficiency vs. Load RW-2412S 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RW-1205S 60 50 40 60 50 40 30 30 20 20 10 10 0 0 10 20 30 40 50 60 70 80 90 0 100 0 10 20 30 Output Load [%] 40 50 60 70 80 90 100 Output Load [%] Input Voltage vs Output Voltage RW-05xx types 100 Output Load [%] 83 90 80 70 60 50 40 30 20 10 0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 Input Voltage [VDC] www.recom-power.com REV.: 2/2020 ECO-2 RW-S DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) REGULATIONS Parameter Condition Value Output Accuracy ±2.0% max. Line Regulation ±0.2% typ. Load Regulation 10% to 100% load 0.5% typ. PROTECTIONS Parameter Type Short Circuit Protection Value below 100mW Isolation Voltage (6) continuous, auto recovery tested for 1 second 1kVDC rated for 1 minute 500VAC/60Hz Isolation Resistance 1GΩ min. Isolation Capacitance 40pF min./ 60pF max. Insulation Grade functional Notes: Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note7: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Condition Value full load @ free air convection (refer to “Derating Graph” ) Operating Temperature Range Operating Altitude -40°C to +80°C 2000m Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 MTBF +25°C +80°C according to MIL-HDBK-217F, G.B. 1034 x 10 hours 168 x 103 hours 3 Derating Graph (@ Chamber and free air convection) 100 90 Output Load [%] 80 70 67 60 50 40 30 25 20 10 0 -40 -20 0 20 40 60 80 Ambient Temperature [°C] www.recom-power.com REV.: 2/2020 100 120 95 110 ECO-3 RW-S DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety SPCLVD1605077-10 Medical Electric Equipment, General Requirements for Safety and Essential Performance WD-SE-R-180675-A0 EAC RU-AT.AB49.B.09571 Standard IEC60950-1: 2005, 2nd Edition + A2: 2013 EN60950-1:2006 + A2:2013 IEC60601-1:2005 , 3rd Edition + A1:2012 EN60601-1:2006 + A12:2014 TP TC 004/2011 RoHS 2011/65/EU + AM-2015/863 RoHS 2+ DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting non-conductive black plastic, (UL94V-0) epoxy, (UL94V-0) Dimension (LxWxH) DIP24 SMD 32.3 x 14.7 x 7.0mm 32.2 x 14.5 x 10.2mm Weight DIP24 SMD 7.0g typ. 7.7g typ. Dimension Drawing DIP24 (mm) DIP24 Version Pinning information Pin # 1,24 10,15 11,14 12,13 embossed logo 4.10 0.50 14.73 7.7 7.0 32.26 Single +Vin -Vout +Vout -Vin Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 0.25 Recommended Footprint Details 1.00Ø +0.15/-0 10 11 12 1 15 14 13 24 11x2.54= 27.94 15 14 13 Top View 2.54 Bottom View 2.16 24 16.35 1 10 11 12 2.54 continued on next page www.recom-power.com REV.: 2/2020 ECO-4 RW-S DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) SMD Version (/SMD) Pinning information Pin # 1,24 10,15 11,14 12,13 embossed logo Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 14.50 0.25 10.20 9.40 32.20 Single +Vin -Vout +Vout -Vin 2.54 18.80 Recommended Footprint Details 10 11 12 16.0 24 23 22 21 1.54 2.03 1 2 3 Bottom View 2.54 0.51 19.27 17.24 Pin area 0.1 x 0.50 Top View 15 14 13 8.89 11x2.54= 27.94 9x2.54= 22.84 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 530.0 x 21.0 x 18.0mm Packaging Quantity 15pcs Storage Temperature Range Storage Humidity -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2020 ECO-5