RW2-4809D/H2/SMD

DC/DC Converter RW2 Description YEA R RW2-1205S 9-18 5 400 75 1000 RW2-1212S 9-18 12 166 80 1000 RW2-1215S 9-18 15 134 80 1000 RW2-243.3S C RW2-2415S 18-36 15 134 83 1000 RW2-483.3S 36-72 3.3 500 73 4700 RW2-4805S 36-72 5 400 76 1000 RW2-4812S 36-72 12 166 81 1000 RW2-4815S 36-72 15 134 81 1000 RW2-0505D 4.5-9 ±5 ±200 73 ±680 RW2-0509D 4.5-9 ±9 ±111 74 ±680 RW2-0512D 4.5-9 ±12 ±83 75 ±680 RW2-0515D 4.5-9 ±15 ±67 75 ±680 RW2-1205D 9-18 ±5 ±200 75 ±680 RW2-1209D 9-18 ±9 ±111 78 ±680 RW2-1212D 9-18 ±12 ±83 80 ±680 RW2-1215D 9-18 ±15 ±67 80 ±680 RW2-2405D 18-36 ±5 ±200 78 ±680 RW2-2409D 18-36 ±9 ±111 81 ±680 RW2-2412D 18-36 ±12 ±83 83 ±680 RW2-2415D 18-36 ±15 ±67 83 ±680 RW2-4805D 36-72 ±5 ±200 78 ±680 RW2-4809D 36-72 ±9 ±111 81 ±680 RW2-4812D 36-72 ±12 ±83 83 ±680 RW2-4815D 36-72 ±15 ±67 83 ±680 CONVER T M 10 from 10 PL U D IA N T PRO C O M CONVER y T REACH compliant CO 18-36 12 166 83 1000 CO 18-36 5 400 78 1000 RW2-2412S M RoHS 2 + compliant 18-36 3.3 500 70 4700 RW2-2405S O M TS 9-18 3.3 500 69 4700 C 4.5-9 15 134 75 1000 RW2-123.3S S RW2-0515S R 4.5-9 12 166 75 1000 E 4.5-9 5 400 73 1000 RW2-0512S S RW2-0505S R 4.5-9 3.3 500 68 4700 E RW2-053.3S RE Input Output Output Efficiency max. Capacitive Voltage Range Voltage Current typ.(1) Load (2) [VDC] [VDC] [mA] [%] [µF] TS Selection Guide arrant w High power-density, 2:1 input voltage range and a wide temperature range of -40°C to +85°C are just some of the characteristics of this versatile DIP16 converter, ideal for highly sophisticated industrial designs where a regulated converter is required but space is at a premium. Three different case styles and isolation options are available. Part Number 2 Watt 3 MINI DIP16, DIP16 or SMD Single & Dual Output C Regulated Converters • DIP16, Mini DIP16 or SMD package style • 1kVDC, 2kVDC or 3kVDC isolation • Continuous short circuit protected • Low ripple and noise • IEC/EN60950-1 certified • Efficiency up to 83% RE Features PL U D IA N T PRO IEC/EN60950-1 certified Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage on the converter www.recom-power.com REV.: 2/2020 ECO-1 RW2 DC/DC Converter Series Model Numbering RW2- __ __ _ /__ _ nom. Input Voltage Case Style (4) Output Voltage Isolation (3) Single or Dual Notes: Note3: „/H2“ = 2kVDC isolation; „/H3“ = 3kVDC isolation; without suffix standard 1kVDC isolation Note4: add suffix „/SMD“ for SMD package or „/B“ for Mini DIP16 THT package; without suffix = standard DIP16 package (refer to “DIP16”) Ordering Examples: RW2-2405S/B: RW2-1212D/H2: RW2-0515D/H3/SMD: RW2-4812S/H2/B 18-36Vin 9-18Vin 4.5-9Vin 36-72Vin 5Vout ±12Vout ±15Vout 12Vout Single Dual Dual Single 1kVDC Isolation 2kVDC Isolation 3kVDC Isolation 2kVDC Isolation Mini DIP16 Package DIP16 Package SMD Package Mini DIP16 Package Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Input Voltage Range Min. 4.5VDC 9VDC 18VDC 36VDC 5VDC 12VDC nom. Vin= 24VDC 48VDC Minimum Load (5) Max. 9VDC 18VDC 36VDC 72VDC 10% 100KHz Internal Operating Frequency Output Ripple and Noise Typ. 20MHz BW 700kHz 50mVp-p Notes: Note5: Operation below 10% load won‘t harm the converter, but specifications may not be met. REGULATIONS Parameter Condition Value Output Accuracy ±2.0% typ. Line Regulation ±0.5% max. Load Regulation 20% to 100% load 0.5% typ. PROTECTION Parameter Type Value Short Circuit Protection (SCP) Isolation Voltage (6) continous standard without suffix tested for 1 second rated for 1 minute 1kVDC 500VAC/60Hz /H2 version tested for 1 second rated for 1 minute 2kVDC 1kVAC/60Hz /H3 version tested for 1 second rated for 1 minute 3kVDC 1.5kVAC/60Hz 1GΩ min. Isolation Resistance Isolation Capacitance 30pF max. Insulation Grade functional Notes: Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note7: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type www.recom-power.com REV.: 2/2020 ECO-2 RW2 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) ENVIRONMENTAL Parameter Condition Operating Temperature Range Value full load @ free air convection (see graph) -40°C to +85°C Maximum Case Temperature +100°C Operating Altitude 2000m Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 MTBF 4366 x 10 hours 658 x 103 hours +25°C +85°C according to MIL-HDBK-217F, G.B. 3 Derating Graph (@ Chamber and free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 85 95 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety SPCLVD1605077-10 IEC60950-1:2005, 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 Medical Electric Equipment, General Requirements for Safety and Essential Performance WD-SE-R-180675-A0 IEC60601-1:2005, 3rd Edition + A1:2012 EN60601-1:2006 + A12:2014 EAC RU-AT.AB49.B.09571 TP TC 004/2011 RoHS2+ RoHS-2011/65/EU TWNC00635328 EMC Compliance Condition Electromagnetic compatibility of multimedia equipment Emission requirements (8) Standard / Criterion with external filter (see filter suggestion below) EN55032, Class A EN55032, Class B EMC Filtering Suggestions according to EN55032 L1 +Vin +Vin +Vout Component List Class A +Vout Models C1 -Vin -Vin -Vout RW2-1212S/H2/SMD 10µF/100V MLCC RW2-2405S/H2 -Vout C2 L1 330pF 5.6µH choke RLS-567 C2 L1 330pF 22µH choke RLS-226 Component List Class B C2 Models Notes: Note8: Filter suggestions are valid for indicated part numbers only. For other part numbers, please contact RECOM tech support for advice. www.recom-power.com C1 REV.: 2/2020 C1 RW2-1212S/H2/SMD 10µF/100V MLCC RW2-2405S/H2 ECO-3 RW2 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value non-conductive black plastic, (UL94 V-0) epoxy, (UL94 V-0) FR4, (UL94 V-0) 22.1 x 12.55 x 8.50mm 24.2 x 14.50 x 9.70mm 24.2 x 14.50 x 10.20mm case potting PCB Mini DIP16 DIP16 SMD Material Dimension (LxWxH) Weight 6.4g typ. Dimension Drawing (mm) DIP16 embossed logo 14.50 9.70 24.2 11.10 Pinning information 0.25 4.60 0.50 Recommended Footprint Details Ø1.0 +0.15/-0 7 8 16 Bottom View 16 10 9 1 6x2.54=15.24 3.2 10 9 Dual -Vin NC Com +Vout -Vout +Vin Tolerance: xx.x= ±0.5mm xx.xx= ±0.35mm Top View 2.54 16.90 1 Pin # Single 1 -Vin 7 NC 8 NC 9 +Vout 10 -Vout 16 +Vin 7 8 2.54 Mini DIP16 (/B) embossed logo 12.55 8.50 22.1 Pinning information 4.00 Ø0.51 Recommended Footprint Details 1 7 8 2.54 7.62 Ø1.0 +0.15/-0 16 Bottom View 16 2.16 1 10 9 6x2.54=15.24 10 9 Top View 7 8 Pin # Single 1 -Vin 7 NC 8 NC 9 +Vout 10 -Vout 16 +Vin Dual -Vin NC Com +Vout -Vout +Vin Tolerance: xx.x= ±0.5mm xx.xx= ±0.35mm 2.54 continued on next page www.recom-power.com REV.: 2/2020 ECO-4 RW2 DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing SMD (mm) SMD (/SMD) embossed logo Pinning information Pin # Single 1 -Vin 7 NC 8 NC 9 +Vout 10 -Vout 16 +Vin 14.50 0.25 10.20 9.7 24.2 2.54 18.55 2.54 16.0 16 1.54 Tolerance: xx.x=±0.5mm xx.xx=±0.35mm 7 8 19.27 17.24 1 Bottom View 0.50 2.03 Recommended Footprint Details Pin area 0.1 x 0.50 Dual -Vin NC Com +Vout -Vout +Vin Top View 10 9 6 x 2.54= 15.24 7 x 2.54= 17.78 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 530.0 x 21.0 x 18.0mm Packaging Quantity DIP16 and SMD Mini DIP16 Storage Temperature Range Storage Humidity 20pcs 22pcs -55°C to +125°C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2020 ECO-5