05A4

05A1 THRU 05A7 SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.5 Ampere FEATURES * * * * * Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight:0.018 gram SOD-123F MECHANICAL DATA .114 (2.9) .106 (2.7) * Epoxy : Device has UL flammability classification 94V-0 .035 (0.90) .077 (1.95) .028 (0.70) .069 (1.75) .008 (0.20) .053 (1.35) .039 (1.00) .033(0.85) .013 (0.35) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .150 (3.8) .142 (3.6) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage o Maximum Average Forward Rectified Current at T A = 55 C Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Current Squarad Time Typical Thermal Resistance (Note 3) SYMBOL 05A1 05A2 05A3 05A4 05A5 05A6 05A7 VRRM 50 100 200 400 600 800 1000 Volts VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Operating and Storage Temperature Range Volts IO 0.5 Amps I FSM 15 Amps I 2T 0.9 2 A /Sec RθJA 85 RθJL Typical Junction Capacitance (Note 1) UNITS 0 25 30 CJ 8 T J, T STG -55 to + 150 C/W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O SYMBOL CHARACTERISTICS Maximum Forward Voltage at 0.5A DC Maximum Full Load Reverse Current, o Full cycle Average at TA =55 C Maximum DC Average Reverse Current at Rated DC Blocking Voltage VF @T A = 25 o C @T A =150 o C NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2.“ROHS compliant”. 3. Thernal Resistance: Mounted on PCB. IR 05A1 05A2 05A3 05A4 05A5 05A6 05A7 UNITS 1.0 Volts 30 uAmps 1.0 2.0 uAmps mAmps 2020-04 REV:C RATING AND CHARACTERISTICS CURVES ( 05A1 THRU 05A7 ) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 0.5 0.4 0.3 0.2 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.1 0 250 50 75 100 125 150 175 50 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 0 0 2 O 1.0 0.1 TA =25 OC Pulse Width = 300ms 1% Duty Cycle 0.01 0 0.5 1.0 1.5 2.0 2.5 3.0 INSTANTANEOUS REVERSE CURRENT, (uA) 10 4 86 10 INSTANTANEOUS FORWARD VOLTAGE, (V) 40 60 80 100 10000 FIG.2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA =150 OC 1000 TA = 25 OC 1.0 0.1 0 20 40 60 100 FIG.4MAXIMUM REVERSE CHARACTERISTICS 200 TA = 25 OC 100 60 40 20 10 6 4 2 0.2 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 1 20 NUMBER OF CYCLES AT 60Hz FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) AMBIENT TEMPERATURE, ( C) 0.4 2 4 10 20 40 REVERSE VOLTAGE, (V) FIG.5 TYPICAL JUNCTION CAPACITANCE 100 140 Mounting Pad Layout 0.030 MIN. (0.75 MIN.) 0.035MIN. (0.90 MIN.) 0.165 (4.19) REF Dimensions in inches and (millimeters) Marking Description Cathode Band A X Part No. Voltage-code Y Year – code (Y:Last digit of year) W 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V Week – code (W:A----week,01/02 B----week,03/04 C----week,05/06 …… Z----week,51/52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SOD-123F/ SOD-123FL PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W 3,000 15,000 --- --- 178 390*205*31 120,000 6.964 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.